I just got the Knox mini for kangertech about 2 weeks ago, I love it but I've been trying to find ideas for coils that would work in the RTA and get more information on how to build a good solid coil for my tank, But I haven't really been able to find out much. I was hoping that the other members here could give me some ideas on what coils that they might have tried that worked out well for them and any other types that could help someone just getting I to rebuild able decks.
Become a Patron!
subtank mini v2 coil (help)
- Thread starter Leo-Vapor
- Start date
I go with a simple 4/5 wrap ( 4 loops on top 5 on the bottom) with 26g kanthal around a 3mm screwdriver. Keeping the spaces between each loop equal. It shows 0.6 on my subox but its closer to 0.5.
Sent from my HTC One X using Tapatalk
Sent from my HTC One X using Tapatalk
I've been rocking 28g kanthal parallel 4 wraps touching around 2.4mm screwdriver. The resistance for this build is where you start to see the shortcomings of the kbox mini tho. It comes in at 0.39 ohms for me on my ohm meter, but the kbox mini reads it in jumps between 0.3 and 0.4.
But I've compared it to a twisted 28g kanthal and the twisted wire seems to pop juice, spit, and generally vaporize juice more violently than parallel coil.
The flavor for this parallel build is nothing like an RDA but it's there.
I have tried parallel 26g and it's hard to get the leads tightened down tight cuz the heads on the tiny screws leave a slight space and the leads are double the size of 26g wire
But I've compared it to a twisted 28g kanthal and the twisted wire seems to pop juice, spit, and generally vaporize juice more violently than parallel coil.
The flavor for this parallel build is nothing like an RDA but it's there.
I have tried parallel 26g and it's hard to get the leads tightened down tight cuz the heads on the tiny screws leave a slight space and the leads are double the size of 26g wire
They fitted no problems, got them installed in 2 mini's and fitted just fine.
Oh I am no way good enough to make my own clapton coils, I cheated and bought premade
The ones I order was 26 gauge wrapped with 32 gauge, I will take it apart a bit later and snap a picture of it for you.
The resistance is around 0.60ohms, I did have it on the vtc mini, but the Crius knocked it off now, yes just kanthal clapton coil.
Nice work man, that's all I use on subtanks now, after claptons, can't go back to standard now
