Hi Vaping Underground members, In this review i take a look at the Supbox Sevo 70W Box Kit from SXK. The SXK Supbox Sevo 70W Box Kit was supplied for the purpose of this review by Linky from Sacowin.
https://www.sacowin.com/product/sxk-supbox-kit/
Introduction
SXK are best known as one of the best cloners and for that very reason divide opinion in the vaping world. Here though we have a product of their own design which is interesting to say the least. Many Billet Box (a device SXK have cloned) lovers like the whole idea of versatility being able to use different RBA bridges and coil adaptors and the Supbox which i assume is short for Super box takes this idea of versatility to a whole new level.
The Supbox comes in this version i have received (with Sevo-70 chipset) and also a Pro version featuring the DNA60 chipset. The device is essentially a side by side which allows not just the Billet / Bantam Box fitting Supbox Pod tank which is compatible with Smok RPM coils but also the Uni Tank, Boro Tank or other tanks which are compatible with the Billet or Bantam box to fit which also means being compatible with almost all available bridges.
The versatility doesn't stop there as the Supbox also comes with a 510 connector allowing standard tanks up to 24mm in diameter to be fitted as well as being able to be used with either an 18650 or 18350 battery which gets rid of the tube giving the device quite a different look!
___________________________________________________________________
In The Box
Contents:
1 x SXK Supbox (pre-installed Supbox Pod Tank and Sleeve)
1 x USB Charging Cable
2 x Coils(0.6Ω/1.1Ω)
1 x User Manual
1 x Outer Sleeve for Atomizer
1 x 510 Plate
___________________________________________________________________
Aesthetics and Ergonomics
The Supbox came in sturdy cardboard box packaging and on opening we can see the Supbox minus drip-tip displayed and a large box of Accessories to the side. The device comes pre-installed with the Supbox Pod Tank and Cage which gives it a better look and also where the Pod Tank is concerned keeps it secured. When using the device with a standard tank it can be used without a top cage but one with a slanted and more rounded front is also supplied if you like the look. I received the Black Yellow version which is a Black device with Yellow top cages but also available is an all Black affair and Black with Red cages. The base, battery tube and cap, fire button (found on the front), side plaque and some protection edging to the Pod Tank Cage are Stainless Steel while the main construction including cages is thick ABS.
At 146g it's about the same weight as an average single battery device once the battery is installed so with the added weight of a battery it's a quite heavy device but it just feels solid. The device is curved and narrower at the spine with raised bands which adds extra grip, ergonomically it's best with the spine in the palm and using as a finger firer as to accommodate the width of boro tanks etc it's much wider at it's front. The overall form factor is basically a side by side device and moving to the stainless steel bottom we have the screen and navigational buttons within an indented section which sit flush. On one side we have a metal plaque with "Supbox" printed and beneath a micro USB port.
___________________________________________________________________
SupBox Specs and Features:
Main Features:
1. 5ml Cartridge, compatible with more than 90% of original accessories of Billet Box Pod Kit
2. Supbox pod tank compatible with SMOK RPM Coils
3. Compatible with more than 95% RTA\RDA\RDTA(less than 24 diameter) on the market
4. 5 different forms: Pod Mode, Tank/RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
5. Single 18650/18350 battery, output power 1-70W, three output modes: VW/TC/By Pass
Parameter:
Construction material ABS + Stainless Steel
Size: 53 x 31 x 96mm
Weight: 146g
Chipset: Sevo 70w
Capacity: 5ml
Resistance range 0.8-3ohm
Resistance: 0.6/1.1Ω
Screen: 0.96 "
Single 18650/18350 battery
Modes: Mode: VW / Mech (Bypass) / TC (NI-TI-SS)
Colour: Full Black, Black Yellow, Red Black
___________________________________________________________________
What You Receive?
You receive the Supbox device pre-installed with the Supbox Pod Tank, installed cage and 510 drip-tip base screwed in place. You also get a 510 drip-tip, cage section for a standard tank and raised 510 plate. The Supbox Pod Tank has an 0.6ohm mesh coil pre-installed, also included is a 1.1ohm mesh coil, finally you get spare o-rings and a micro USB cable. (Note: you also receive the Uni-Tank with the Pro version).
Some random photos:
___________________________________________________________________
Modes Of Operation
The marketing shows the device to have 5 modes of operation or set-ups which isn't the case out the box with the DNA60 Pro version having 4 and the Sevo-70 having 3 but the potential is there.
First we have Pod Mode which is the use of the pre-installed Pod Mod Tank which is compatible with Smok RPM coils. Next we have Tank Mode which after removing the contact plate it gives us a 510 connector for tall tanks or you can screw in the raised 510 plate for more standard height tanks, this mode is for when using the supplied cage limiting tanks to 24mm. Next is Universal Mode which is when using the Uni Tank which 90% of available bridges will fit but the Uni Tank only comes with the DNA60 Pro version. Next is 18650 mode which is Tank Mode but without the cage which both gives a different look and increases the maximum size tank to 26mm. Finally we have 18350 mode for low wattage MTL vapers making the device smaller but the 18350 tube isn't included with either versions so will be a separate purchase.
___________________________________________________________________
Compatibility And What Else Is Available
As well as the Supbox Pod Tank which is compatible with RPM coils and the Uni Tank which isn't included with the Sevo-70 version but can be bought for just $7.20, any tank that fits inside the Billet Box Rev4 or Bantam Box will fit including the Bantam Pod Tank and All in one products like the Vapesnail.
Also as mentioned there will be an 18350 tube available and sets of the cages in different colours which i have already seen available at $10.50. Finally there are also other 18650 tubes available in different designs so the device can be customised to give it a different look!
___________________________________________________________________
Using Boro & Pod Tanks
To fit any Billet or Bantam Box Tank you just hold the Tank in position and lower the top cage that fits nicely to the shape of the Tank keeping it in position even though the set-up at this stage isn't secured. Screwing the battery cap on tightens down the cage and then screwing the drip-tip base just like with a Billet Box secures the Tank in position, just make sure the drip-tip base is secured tight so you don't have the ohms reading jumping around!
Picured: Supbox Pod Tank, Vapesnail, Bantam Pod Tank and Bantam Pod Tank with own 510!
___________________________________________________________________
Using Standard Tanks
First you need to unscrew the contact plate which is easier if you start loosening it with the use of needle nose tweezers placed in two of 4 available tiny holes, then it can be finished with your fingers, likewise when fitting back in place screw in finger tight then give it an extra turn with tweezers.
This now reveals a standard 510 connection and very tall tanks can be screwed straight in but standard size tanks will need the raised 510 plate fitting in place first. If using a tank 24mm in diameter or less you can fit the cage which like the Pod Tank cage gets secured in place by screwing the battery cap in position.
___________________________________________________________________
Review Continued Below:
https://www.sacowin.com/product/sxk-supbox-kit/
Introduction
SXK are best known as one of the best cloners and for that very reason divide opinion in the vaping world. Here though we have a product of their own design which is interesting to say the least. Many Billet Box (a device SXK have cloned) lovers like the whole idea of versatility being able to use different RBA bridges and coil adaptors and the Supbox which i assume is short for Super box takes this idea of versatility to a whole new level.
The Supbox comes in this version i have received (with Sevo-70 chipset) and also a Pro version featuring the DNA60 chipset. The device is essentially a side by side which allows not just the Billet / Bantam Box fitting Supbox Pod tank which is compatible with Smok RPM coils but also the Uni Tank, Boro Tank or other tanks which are compatible with the Billet or Bantam box to fit which also means being compatible with almost all available bridges.
The versatility doesn't stop there as the Supbox also comes with a 510 connector allowing standard tanks up to 24mm in diameter to be fitted as well as being able to be used with either an 18650 or 18350 battery which gets rid of the tube giving the device quite a different look!
___________________________________________________________________
In The Box
Contents:
1 x SXK Supbox (pre-installed Supbox Pod Tank and Sleeve)
1 x USB Charging Cable
2 x Coils(0.6Ω/1.1Ω)
1 x User Manual
1 x Outer Sleeve for Atomizer
1 x 510 Plate
___________________________________________________________________
Aesthetics and Ergonomics
The Supbox came in sturdy cardboard box packaging and on opening we can see the Supbox minus drip-tip displayed and a large box of Accessories to the side. The device comes pre-installed with the Supbox Pod Tank and Cage which gives it a better look and also where the Pod Tank is concerned keeps it secured. When using the device with a standard tank it can be used without a top cage but one with a slanted and more rounded front is also supplied if you like the look. I received the Black Yellow version which is a Black device with Yellow top cages but also available is an all Black affair and Black with Red cages. The base, battery tube and cap, fire button (found on the front), side plaque and some protection edging to the Pod Tank Cage are Stainless Steel while the main construction including cages is thick ABS.
At 146g it's about the same weight as an average single battery device once the battery is installed so with the added weight of a battery it's a quite heavy device but it just feels solid. The device is curved and narrower at the spine with raised bands which adds extra grip, ergonomically it's best with the spine in the palm and using as a finger firer as to accommodate the width of boro tanks etc it's much wider at it's front. The overall form factor is basically a side by side device and moving to the stainless steel bottom we have the screen and navigational buttons within an indented section which sit flush. On one side we have a metal plaque with "Supbox" printed and beneath a micro USB port.
___________________________________________________________________
SupBox Specs and Features:
Main Features:
1. 5ml Cartridge, compatible with more than 90% of original accessories of Billet Box Pod Kit
2. Supbox pod tank compatible with SMOK RPM Coils
3. Compatible with more than 95% RTA\RDA\RDTA(less than 24 diameter) on the market
4. 5 different forms: Pod Mode, Tank/RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
5. Single 18650/18350 battery, output power 1-70W, three output modes: VW/TC/By Pass
Parameter:
Construction material ABS + Stainless Steel
Size: 53 x 31 x 96mm
Weight: 146g
Chipset: Sevo 70w
Capacity: 5ml
Resistance range 0.8-3ohm
Resistance: 0.6/1.1Ω
Screen: 0.96 "
Single 18650/18350 battery
Modes: Mode: VW / Mech (Bypass) / TC (NI-TI-SS)
Colour: Full Black, Black Yellow, Red Black
___________________________________________________________________
What You Receive?
You receive the Supbox device pre-installed with the Supbox Pod Tank, installed cage and 510 drip-tip base screwed in place. You also get a 510 drip-tip, cage section for a standard tank and raised 510 plate. The Supbox Pod Tank has an 0.6ohm mesh coil pre-installed, also included is a 1.1ohm mesh coil, finally you get spare o-rings and a micro USB cable. (Note: you also receive the Uni-Tank with the Pro version).
Some random photos:
___________________________________________________________________
Modes Of Operation
The marketing shows the device to have 5 modes of operation or set-ups which isn't the case out the box with the DNA60 Pro version having 4 and the Sevo-70 having 3 but the potential is there.
First we have Pod Mode which is the use of the pre-installed Pod Mod Tank which is compatible with Smok RPM coils. Next we have Tank Mode which after removing the contact plate it gives us a 510 connector for tall tanks or you can screw in the raised 510 plate for more standard height tanks, this mode is for when using the supplied cage limiting tanks to 24mm. Next is Universal Mode which is when using the Uni Tank which 90% of available bridges will fit but the Uni Tank only comes with the DNA60 Pro version. Next is 18650 mode which is Tank Mode but without the cage which both gives a different look and increases the maximum size tank to 26mm. Finally we have 18350 mode for low wattage MTL vapers making the device smaller but the 18350 tube isn't included with either versions so will be a separate purchase.
___________________________________________________________________
Compatibility And What Else Is Available
As well as the Supbox Pod Tank which is compatible with RPM coils and the Uni Tank which isn't included with the Sevo-70 version but can be bought for just $7.20, any tank that fits inside the Billet Box Rev4 or Bantam Box will fit including the Bantam Pod Tank and All in one products like the Vapesnail.
Also as mentioned there will be an 18350 tube available and sets of the cages in different colours which i have already seen available at $10.50. Finally there are also other 18650 tubes available in different designs so the device can be customised to give it a different look!
___________________________________________________________________
Using Boro & Pod Tanks
To fit any Billet or Bantam Box Tank you just hold the Tank in position and lower the top cage that fits nicely to the shape of the Tank keeping it in position even though the set-up at this stage isn't secured. Screwing the battery cap on tightens down the cage and then screwing the drip-tip base just like with a Billet Box secures the Tank in position, just make sure the drip-tip base is secured tight so you don't have the ohms reading jumping around!
Picured: Supbox Pod Tank, Vapesnail, Bantam Pod Tank and Bantam Pod Tank with own 510!
___________________________________________________________________
Using Standard Tanks
First you need to unscrew the contact plate which is easier if you start loosening it with the use of needle nose tweezers placed in two of 4 available tiny holes, then it can be finished with your fingers, likewise when fitting back in place screw in finger tight then give it an extra turn with tweezers.
This now reveals a standard 510 connection and very tall tanks can be screwed straight in but standard size tanks will need the raised 510 plate fitting in place first. If using a tank 24mm in diameter or less you can fit the cage which like the Pod Tank cage gets secured in place by screwing the battery cap in position.
___________________________________________________________________
Review Continued Below:
Last edited: