Temp control coil builds

[twisted]

im new to temp control and wire to build temp coils. I usually build with 24 gauge kanthal around .2-.3. What Gauge wire is good to build with. I'm on vapenw.com and they only have ni200 in 26,28 and 30. I will be building duels could just not sure what size wire is best for a vape like a duel 24 gauge kanthal at .2ish

 

[Discobob]

Your best bet for duals will be 28 or higher, TC requires tinkering a bit but check some vids and dive in you will love it

 

[f1r3b1rd]

TC and vaping with kanthal are two completely different things.
With ni200 for a dual coil you'll want 28g about 10/11 wraps at 3mm inside diameter spaced.
Should be in the neighborhood of a 0.1

With stainless steel(if your mod supports it) you can use 24g stainless steel and do a build just like kanthal

With titanium I have absolutely np clue.

Check YouTube for build advice as well as what other say on here.
Best of luck.

 

[twisted]

I'm going to be getting the nebox, evic mini and sigelie 200. I don't think any of these can use ss think they are all just nickel and titanium

 

[f1r3b1rd]

Well, watch some tubeyou but that build up there would work for the nickels

 

[AmandaD]

I'm going to be getting the nebox, evic mini and sigelie 200. I don't think any of these can use ss think they are all just nickel and titanium

I don't think there's much room for dual coils on the Nebox RBA - it's just like the Kanger RBA and pretty small. I was running Ti coils in my Kangers. However, reviews of the Nebox are indicating that tc isn't working properly on the Nebox, so when mine arrives tomorrow I'm planning on running ss in power mode.

The only time I used duals with TC has been in the Bilow V2, and I used Ti - much easier to get a reasonable resistance in a small space with Ti than Ni. However, I'm not that impressed with tc with dual coils.