TESLA Tallica Sub Ohm Tank Review

[Tmart ecig]

Smoant has recently introduced some products that are very competitive in the market. smoant RANKER 218 W is regarded as the latest masterpiece of Smoant. The elements of the military are also very eye-catching. Let's take a look now!

The overall appearance refers to the design elements of the vertical gun handle. While changing the appearance of the fire button, it also changes the operation type. The size of the mainframe 59*92*31.5mm is very suitable with the shape of the vertical gun handle.

The fire button is on the right side of the mod. The triangular ignition key adopts side pressure ignition, which makes the operation experience more comfortable.

The top of the mod is sloped, while the 510 connector is installed on the left side of the top. It extends from the inclined plane and is perpendicular to the bottom plane. The entire 510 platform is 25mm in diameter, and there is no need to worry about the mod scratches caused by its angle.

The 510 adaptive positive pole is arched, which avoids the short circuit caused by the large positive contact of the atomizer (some of these problems will occur when the mod is matched with the atomizer).

The tilted screen is parallel to the tilt of the adjustment button and the mod itself. Since the RANKER is still using the Ant V2 (ant218) chip independently developed by smoant, the screen display style and function are virtually the same with that of the smoant Cylon 218W .

The artificial leather patch provids you a comfortable experience while holding,and in accordance with the smoant's consistent style, Smoant will launch different styles of patches for the player to choose.

The battery cover is at the bottom of the mod, adopting the popular flip-type structure. and the firmness is excellent. It requires a large force to open the battery cover.The positive and negative signs are printed on the inside of the cover clearly. Fully insulated design inside the battery compartment ensures the safety.

The main power output can actually support a resistance value of 0.08 (official 0.1) -5 ohms and a power range of 1 - 218 W, which improves in practicality. The temperature control function supports the resistance value of 0.05-2 ohms, and the temperature control range of 100-300℃ (200-600℉). In addition, the heating wire supports Ni200 (nickel), Ti (titanium), and SS (stainless steel 303 304 316 317).

As the latest masterpiece of smoant, in addition to having a cool appearance, excellent performance is also essential. Let's take a look at its performance through a GIF PIC

PROS:
1. excellent design

2. excellent performance

3. 0.97 inch high-definition color display

4. better grip and ignition experience

5. the design of the top anti-scratch plate

6. excellent workmanship

CONS:

1. larger size (since its press-type fire button, and the larger body width, you need set it with two hands)

2. dim screen

3. 18650 compatibility only

With the further assimilation of mods, appearance and workmanship are naturally the key factors that affect players' selection. Sometimes a device with outstanding appearance can even make players to ignore their design problems and choose to start, but with the player's requirements to further improved, the product with great design and excellent workmanship will be their choice.

 

[Tmart ecig]

When you try to buy a vape kit online, you will often come across such items as mouth to lung, direct to lung or sub ohm tank. What on the earth do they mean?

What is mouth to lung inhale?
Mouth to lung (or MTL for short) refers to hold the vapor in your mouth and then breathe it into your lungs. Smokers will be used to mouth to lung vaping, since it’s a similar process to smoking cigarettes. This is because of the way smokers have to suck in the smoke from cigarettes and gather it in their mouth before they can inhale the smoke into their lungs. With this vaping，you can have the smoking experience and a more satisfying throat hit and nicotine hit.

Simple steps on how you vape mouth to lung.

• Take a smooth draw of vapour into the mouth. (Don’t take short, sharp drags like you would on a cigarette) A slightly longer draw is needed.
• Once vapour is in the mouth inhale to lungs drawing air in at the same time.
• Exhale

What is direct to lung inhale?
Direct to lung inhale (DTL) is when you inhale the vapour directly into your lungs, without holding it in your mouth first. on the other hand, bypasses the mouth and goes straight to your lungs. Direct to lung inhale can also be known as straight to lung inhale.

Most people don’t vape like this when they start out, but it becomes popular in recent years due to the rise in hobby vaping and cloud chasing. If you try direct to lung inhale, you’ll find that you need to go with a low nicotine or nicotine-free (ie 3mg or even 0mg) vape juice, becouse the nicotine will hit you in a more direct way, and a high nicotine strength (or high PG strength) could make you cough or feel unpleasant.

You’ll also want to find an ejuice with a high VG level, which means less PG (and therefore less of a lung hit) but a lot more cloud. A kit with air flow (you can adjust air flow to satisfy your needs) is also great for direct to lung inhale.

Simple steps on how you vape direct to lung.

• Draw slow and steady directly into your lungs.
• A drag DTL style can be 3-5 seconds or more.
• The key is not to take sharp drags.. Smooth, steady motion is the key.
• Once it reaches your lungs exhale those clouds of vapour.

What e juice is best for MTL vaping?
Typically, when mouth to lung vaping, most vapers use an ejuice with a high PG (propylene glycol) ratio. This gives a satisfactory throat hit and is also more suited for the devices used for mouth to lung vaping. Black Note Virginia tobacco sets, with its 50-50 VGG ratio, is ideal.

Which PG/VG Ratio Is Best For MTL Vapers

This section needs paying attention to. Choosing the wrong PG/VG ratio for first time users can make or break an experience. PG and VG are two of the main vape ingredients in e juice.

• PG – Propylene Glycol
• VG – Vegetable Glycerin

As far as PG and VG go, the devices which support MTL hits are generally only suited to a higher PG content.

I have seen many a time new vapers buying 80% and 90% VG juices for their new vape pen starter kits and then blaming the devices for continual dry hitting.

It’s generally not the devices fault, as VG is a thicker consistency (PG is thinner) that can have trouble wicking in the smaller MTL coils. PG is also known to be a good flavour carrier.

Also, because this method is considered as a suitable smoking replacement…the throat hit from PG e juice will probably seem more satisfactory to this type of vape.

A higher nicotine strength I’ve found can also be a main contributor to increased throat hit.

Recommended PG/VG Ratios for Mouth To Lung Devices

• 50PG/50VG – Good throat hit – vapour productionok
• 60VG/40PG – A smoother vape – Vapour production better
• 70VG/30PG – Some of the more recent MTL devices vape well

What e juice is best for DTL vaping?
When you direct to lung vape, you usually use an e-juice with a higher VG (vegetable glycerin) ratio. This gives a smoother vape with more vapour, and does not hurt the throat despite the larger clouds. Typical VGG ratios vary, but 70:30 VGG and 80:20 VGG ratios are common. LIQUA ejuice offers 35:65 VGG for your choice.

Recommended PG/VG Ratios for Direct To Lung Devices

The below is a general guideline. A lot of the experiences you have with flavour and vapour production can also depend on the specific e-liquid brand you choose.

• 60VG/40PG – Very good flavor, decent cloud production and a hint of throat hit.
• 70VG/30PG – One of the most popular blends for sub ohm/DTL vapes. Good flavor, plenty of clouds and smooth throat hit.
• 80VG/20PG – Good flavor, dense clouds and silky smooth throat hit.
• 90VG/10PG – Good flavor, even denser clouds and smooth on the throat.
• 100% VG– Pure clouds and super smooth.

However,it’s up to you to decide whether you prefer mouth to lung or direct to lung vaping. MTL vaping offers a better throat hit than DTL vaping does, which of course simulates the sensation that smokers are used to. You’ll also find that MTL vaping makes your ejuice last longer than it would if you were DTL vaping. Because of the action of a MTL vape is similar to cigarette smoking, this is often a good way to vape for most everyday vapers, and it’s the best method to start with if you’re trying to quit tobacco cigarettes. While DTL vaping is great if you want to produce great vapour clouds. Or, you can stock up on both types of devices and switch it up whenever you want.

 

[Tmart ecig]

i don not know whether i post the right place.if not ,please be free to delete

 

[KingPin!]

Good info

you posted links to juices - moved to unlisted vendors

 

[Tmart ecig]

Due to the variety of e-cig batteries, it’s a bit difficult for newcomers to choose. Someone will say that the battery with high discharge performance is the best choice. Of course,the discharge capacity and storage capacity are the two important reference indicators of batteries which are considered commonly. However, these two parameters are inversely proportional - the greater the storage capacity is, the lower the is, and the stronger the discharge capacity is, the lower the storage capacity is.

So how should we do? how to choose the right e cig battery according to our own ecig device? Today we will talk about it.
https://www.vapingbison.com/collections/mods-kits
Usually the voltage of 18650 battery is 4.2V when fully charged, and its stable voltage is 3.7V,and there are some special materials such as lithium iron phosphate battery of which voltage is 3.2V. The voltage applied to the atomizer when using the mechanical rod is the voltage of the battery itself, unlike the voltage regulating device, the output voltage can be adjusted.

As I mentioned before,the two important indicators of the batteries are discharge capacity and storage capacity. And the discharge capacity of the battery is usually based on the current unit "A". but the parameters of the battery are not marked with "A" when purchasing the battery. What you find is the value of "C".

In fact, in the battery industry, the battery performance is usually expressed by “C”, not “A”, what is “C”? “C” refers to the discharge rate, which is the battery capacity and discharge flow rate. That is: charge/discharge rate = current/rated capacity.

For example, when a battery with a rated capacity of 1000 Ah is discharged at 20 A, its discharge rate is 2 C, and it can be discharged at 20 times its own capacity (1 A).

Battery discharge rates such as 1C, 2C, 0.2C represent the discharge rate of the battery, indicating the speed of discharge. If the capacity will be completely discharged in 1 hour, we called 1C discharge; 5 hours is completed, it is called 1/5 = 0.2C discharge. The battery capacity can generally be detected by different discharge currents. For the 2400mah battery, the 2C discharge current is 48A and the 0.5C discharge current is 12A.

First, how select the right battery for the mechanical rod

The mechanical rod is actually the container of the battery and the conductor of the current and can directly exert the maximum output capacity of the battery, so the requirements for the battery are higher.

With regard to mechanical rods, the point most concerned about is safety. Why do mechanical accidents happen? There are several reasons:

1. Low quality battery without pressure relief valve.

2. The maximum output current is too low, but it exceeds the standard when in use, resulting in excessive battery pressure and serious damage of the battery shell. In fact, due to there is no pressure relief valve, so the battery will not automatically stop working.

3. If the battery breaks and causes the battery to short-circuit or contact with the shaft directly,forming a circuit without passing the switch, the atomizer will automatically work. If the battery is not found for a long time, an accident will occur.

4. Some mechanical rod structural defects or unreasonable design can also lead to battery short circuit.

5. The atomizer electrode structure causes short circuit. (For example, a atomizer with a positive or partially concave power supply and a mechanical rod without a positive post)

Which kind of battery should you use? We can calculate it according to the formula: voltage / resistance = current, so if you use 0.2Ω data, then it is 3.7/0.2=18.5A; if you use about 0.12Ω daily data, then it is 3.7/0.12=30.8A , but the maximum output current of genuine Sony C4 battery is stable at 30A, so 30.8A has slightly exceeded ( because 30A is a steady continuous discharge current, so a short time to reach 40A is possible, but will affect Battery life, and the increase in battery internal resistance are also likely to cause safety problems, so it is not recommended that the resistance is less than 0.12Ω).

The output of the mechanical rod is related to the resistance value. We calculate it by another formula, voltage² / resistance = power, then 0.2 Ω resistance represents (3.7 * 3.7) / 0.2 = 68.45 W, and 0.14 Ω is 97.78W, we can determine how much resistance data to use based on our own needs for clouds. After determining the resistance we need, we can use this resistance to select the battery. Since the capacity is inversely proportional to the maximum continuous output current, the Low-volume, high-capacity batteries can be used when you do not need much clouds.

Second, how to choose the right battery for the voltage regulator equipment?

Voltage regulator equipments have a chip to regulate the output voltage and current, but also with perfect protection measures, so the battery requirements are lower than that of the mechanical rod. But it does not mean that any battery can be chosen casually. After all, energy is conserved.


A lot of players have encountered this situation, that is, once you start to fire, the battery power level will drop sharply , but when the ignition key is released, the power is back. Why?

In fact, although the battery has a nominal voltage, but the output voltage is not always 3.7V, the process of discharge is actually the process of gradually decreasing the battery voltage. When you use a battery with a low discharge rate,and open it to 50W, the battery will not provide so much current, so the voltage will drop sharply, but after you release it, the battery stops outputting voltage and automatically picks up.

Then how do we choose the pressure regulating device battery? The first thing you need to know is how much power you normally use, so that we can determine the constant discharge current , and then use this data to select the battery's capacity so that you can maximize battery performance.

For instance: If the device is a single electricity mod with 70W,and the screen display voltage is 3.7V, then according to the formula power / voltage = current, we can come to 70/3.7 = 18.91A this value, Then you only need to use a battery with a maximum continuous discharge of 20A.

For "dual-powered" mainframes, it is divided into the "series" and the "parallel" two forms: the series voltage is equal to the sum of all battery voltages, the current is equal to the current flowing through each battery, and the parallel voltage is equal to a single battery voltage, current is equal to the sum of battery currents.

If you use a dual-powered series mainframe, then the calculation is slightly more troublesome.

Since the internal resistance of the battery is increased after the dual series connection, the maximum continuous discharge current will be lower than that of the original single cell. Let's be conservative and make a 70% discount, then the original 20A battery will become 14A.

Then we take a look at how to calculate the dual-powered series mainframe, still 70W, the screen display voltage is 3.7V, because it is connected in series, the actual operating voltage of the battery may be 7.4V, then the actual battery output current is 9.459A, you will see, a single 20A battery can still support this current well.

The operating current is 140/4.2=33.333333, the battery input voltage may still be 7.4V, the actual output current is 18.9A, you can see the demand current is greater than provide current, but it involves the problem of adjusting high voltage to low voltage to increase the current, so we can roughly calculate it, because of the voltage regulating equipment,its output voltage is actually relatively fixed, so we can roughly calculate the required current, such as the highest power 200W , the maximum output voltage of the chip is 7.5V, then 200/7.5=26.66A, using a 30A battery(the actualcuttent is 21A) can barely achieve the effect of use.

If the discharge is lower than the calculated value, it will show low voltage even through the power still has one third of the time, and the set output power cannot be achieved.

 

[Tmart ecig]

The Eleaf iStick Pico S TC Kit Powered by a single 21700 cell, the iStick Pico S fires a maximum output of 100W. The iStick Pico S is also compatible with 18650 battery with an included adapter. It supports various working modes to meet your different vaping needs. And the Ello Vate has 6.5ml capacity. It adopts top fill design and adjustable bottom airflow. The new HW-M and HW-N brings amazing vaping experience to you!

http://bit.ly/2rSimHW

 

[Tmart ecig]

Many people have heard of "homemade Ejuice." Do you know what is the Ejuice made of? In fact, the composition of the smoke oil is still relatively simple. Although the taste of the E-juice is ever-changing, but the ingredients are always the same, mainly include: PG, VG, essence, nicotine solution and additives. These raw materials are very common in daily life, so it's possible to DIY E-juice. However, please note that must use "food grade" or "pharmaceutical grade" raw materials to avoid health effects. While many merchants use shoddy goods, using industrial-grade raw materials to impersonate food grades, and novices can't distinguish, so this is one of the reasons why novice smokers are not advised to make their own E-juice.

The Composition of E-juice

1, PG, also known as propylene glycol. It is a very widely used raw material that we can access almost every day in our daily lives. Such as cakes, liquid soap, lipstick ... and so on. The main roles of PG in E-juice are dissolving flavor, producing a certain throat sensation, and diluting the viscosity of E-juice. In general self-made vaping juice, the PGs of the "Dow" are mostly used , and they must be in compliance with "FDA" standards to be relatively safe and healthy. However, many people are allergic to PG, and the inhalation of pure PG mist will cause adverse reactions such as nausea, dizziness, and vomiting, which will seriously endanger life. So there is no "pure PG" component of the E juice.

2, VG, also known as glycerol or vegetable glycerine. I believe that many people are familiar with it, because if you want to play big smog, it will certainly be VG. Its main role is to produce a lot of smog.so if you want an experience with larger smog,you can chose high VG vape juice. However, VG has a high viscosity and poor fluidity, so it is generally required to use PG or distilled water to dilute it. Compared with PG, general flavors and additives are hardly soluble in VG. VG is much softer than PG, and the resulting smoke is soft and smooth, but it is not as good as PG for improving the taste of E-juice.

3, Flavor, flavor determines the taste of a E-juice, divided into domestic flavor and imported flavor. For the imported flavors, you can use the specific flavors which are specially designed and manufactured for the preparation of E-juice. The flavor, solubility and other properties are better than ordinary food flavors. For domestic flavors, it is best to use high-temperature edible baking flavors and to use “water-soluble” or “oil-water soluble” flavors to avoid turbidity that is insoluble in PG.and it is hard to say what is the best Ejuice flavor.

4. Nicotine solution, which is one of the very high risk ingredients. As we all know, pure nicotine is highly toxic. it can cause poisoning even just smelling a bit. Pure nicotine is also one of the highly dangerous chemicals that are controlled by the state. Therefore, we just can use the nicotine solution.we can dissolve different amount of pure nicotine in a PG solvent and get different concentrations of nicotine solution. The common standard are 36 mg/ml and 40 mg/ml which represent 36,40 milligrams of nicotine per 1 ml of nicotine solution.

5, Additives, its role is to improve the taste. Common agents such as: throat throat agent, can make the E-juice into the throat more smooth, reduce irritation; sweeteners, increase the sweetness of the E-juice; sweetener, can reduce the "sweetness" of the entrance of the E-juice, ethyl malt Phenol, flavoring; etc. There are more special, such as "distilled water" is used to dilute the overall viscosity of the smoke, many of the pure "VG" component of the E-juice will be added. Additives do not necessarily have to be added to the E-juice, and it is necessary to consider whether to use it according to the formula or the actual situation.

3 FREQUENTLY MISTAKES YOU WILL MEET WHEN DIY YOUR EJUICE

#1: Not Steeping Your Juice

As soon as your finish your juice, you're going to be in a hurry to test it out to see if you pulled it off properly. However, what many newbies don't become fully aware of is that juices have to steep. It needs to age, like a fine wine or cheese, for a while before its flavors combine and oxidize. This steeping process allows the ingredients to mix properly, as well as allowing the flavors to shine.

To properly steep your juice, please make sure it is in glass bottles. Since it requires heat, and glass has better heat-retaining abilities than plastic.

The most popular steeping method is a water bath. Place the bottles of juice in a container and fill this container halfway with warm water. Then, place this bath in a dark, cool area for a few days.

#2: Not Cleaning Your Equipment

Flavoring extracts are very powerful, concentrated products that’ll remain in place if you do not adequately wash your equipment after each mixing session. Equipment like syringes and bottles must be washed thoroughly with hot water or alcohol, or else they’ll preserve the flavor of the prior batch.

#3: Guessing the Proportions

You can DIY your own liquids by yourself, However, there are still standard proportions that you should not go away from to. For instance, a frequent beginner mistake is going a bit overboard with the flavors. Even if a flavor is delicious, adding too much of it will ruin the consistency and likely make the taste of it so intense that it just won't be pleasant. There’s a science to creating vape liquid that involves specific proportions of ingredients. Luckily, you can use calculator tools online that’ll help you get your proportions to where they need to be.

Listing some of the most popular e-liquids found from various vendors and merchants. Maybe you find your favorite.

1. Castle Long Clone: An inexpensive alternative to the popular castle long e-liquid. Hosting an addictive aroma with the smell of roasted almond nut bread, playing around with different substitutions of fruit flavors you can reach your desired aftertaste, or keep it simple.



Percentage TFA Flavoring

2.5% Kentucky Bourbon

1.5% Coconut Extra

1.5% Acetyl Pyrazine

1.5% Toasted Almond

1% Vanillin

1% Bourbon Vanilla

1% Brown Sugar Extra



2. Vanilla Tobacco: This e-liquid recipe has a nice smooth and flavorful taste, with a decent vapor production. The e-liquid recipe is diketone free, hosting a creamy and mild honey tobacco flavor, with quite a large nicotine percentage you might want to play with this until you reach your desired taste. VG50/PG50 Base 6% Nicotine



Percentage TFA Flavoring

5% Black Honey Tobacco

3.5% French Vanilla Cream

1.5% DX Bavarian Cream



3. Dr. P Pepper: Almost identical in taste to the famous drink Dr. Pepper, this e-liquid recipe has a perfect balance between its sweet taste. The balance between cola and different berries makes an interesting aftertaste. VG50/PG50 Base (No nicotine specified)



Percentage TFA Flavoring

11% Plum

5% Black Cherry

4% Cola

1% Cinnamon Spice



4. Candy Bar: Just like the name, this e-liquid recipe is incredibly sweet. Hosting many of the flavors found in the most popular chocolate bars, you will be sure to feed your sweet tooth with this incredibly diverse juice. VG50/PG50 (No nicotine specified)



Percentage TFA Flavoring

5% Peanut Butter

5% Marshmallow

5% Double Chocolate

3.5% Caramel

1-2% Sweetener



You have made your first bottle of juice successfully. Now let's share the information with your vape friends. There’s a whole world of flavors out there, many times more than you’ll find on sale at your local brick and mortar vape shop. Here are some tips for finding new recipes:

Reddit – The DIY e-juice subreddit is responsible for countless excellent recipes. Here you’ll find invaluable information about the art of DIY, along with thousands of vape juice recipes.

eLR – As well as being a valuable mixing calculator, eLR also has a vast numbers of recipes. Its most useful feature is the flavour stash – input your stockpile of flavours and eLR will come up with a list of e-juice recipes you can make. But be careful, anyone can submit recipes so they aren’t necessarily all winners. Stick to trusted authors and highly-rated submissions.

KRITIKALMASS - this website is to provide vaping community of Do-It-Yourselfers (DIY) an easy-to-navigate way to search and find recipes for making your own e-liquids at a fraction of the cost of pre-made mixes.

 

[Tmart ecig]

4 BEST RTA ATOMIZERS
1. SMOK TFV8

Smok has christened this RTA “The Cloud Beast,” and it’s with good reason too. with the marquee V8-T8 Octuple Coil Head measuring 0.15ohms with a maximum output range of 260W. The V8-T6 features a sextuple coil design measuring 0.2ohms and is rated between 50 to 240W. The V8-Q4 has an output range of 50 to 180W, providing an excellent middle ground of premiere flavor and vapor. The V8-RBA Head is one of the most capable in its class, with an 18mm diameter deck that integrates a two post, dual terminal design with each terminal measuring 2mm in diameter. The TFV8 adopts a highly effective chimney, increasing the spacious internal barrel for higher airflow efficiency, increasing area by 30% than the original TFV4 Tank . Ample airflow feeds into the V8 Turbo RDA, with dual 8mm by 5mm internal air slots while wicking is efficient due to the unified wick port designs.

Features:

• Good performance at any power level
• Adjustable airflow
• Has the ability to use some different coil heads
• Provides huge clouds

2. OBS Engine RTA

The OBS Engine has a look that can best be described as unique. It has an adjustable airflow at the top of the cap as well as being a top fill device. This makes it easy to use, as well as limiting the size of the device to ensure that it is not too large. The tank is a good size as well, holding a very generous 5.2ml of e-liquid. The OBS Engine has a drip tip included, but it can easily be changed to a different one if the user has a personal favorite drip tip.

The whole device is very easy to take apart to carry out cleaning. This warrants that there is less chance of old e-liquid ruining the flavors of new e-liquids that are put into the tank. Due to the top fill and top airflow design, it does offer up the problem that if the device isn’t wicked correctly, it can shoot hot e-liquid directly into the user’s mouth. This is obviously an issue and means that the OBS Engine is not a device for a novice.


Features

• Top fill design
• Top airflow
• 5.2ml tank
• Airflow is fully adjustable

3. Vandy Vape Kylin 24mm Postless RTA

Vandy Vape's Kylin RTA follows up on the critically acclaimed iCon and GOVAD RDA platforms, presenting a postless build deck, an expandable tank capacity for all day range, all paired with a dynamic airflow system. The Kylin RTA's ability to produce immense flavor and vapor production stems from its core, a gold plated postless build deck with quad air channels and large wicking cutouts. The pair of centralized air channels brings airflow beneath the coils, while the outer channels direct airflow around the side and up towards the domed chimney. Additionally, the airflow is controllable via the three position airflow control ring and divided into two separate sides by a PEEK splitter. The Kylin RTA comes as a 2ml compact tank system which is expandable to 6ml using the included chimney extension and extended glass section.

Features

• Adjustable airflow
• Reinforced with Pyrex
• 2ml standard capacity can be increased up to 6ml!!
• Postless design
• 24 karat gold plated build deck

4. GeekVape Zeus RTA

The main thing that stands out from the start of the GeekVape Zeus RTA is that it is leak proof. There is not much worse than e-liquid leaking everywhere, so the GeekVape Zeus is alleviating this problem gives it an instant head start. With a slender 25mm diameter and a 4ml capacity, it is comfortable to hold and holds a right amount of e-liquid. The dynamic air flow that it offers means that the flavor that is experienced through the GeekVape Zeus is as good as it gets, it provides a smooth vape too which is down to the air flow system.

The flavor isn’t the only area where the Zeus excels either, the clouds that can be created are fantastic. All of this comes together with a high level of build quality, which is par for the course when it comes to GeekVape, meaning there is no danger of the Zeus letting people down at a vital moment, it has a simple top fill action as well making it a simple task of refilling it.

 

[Tmart ecig]

"Being Simple and reliable" has always been the character of Sub ohm tanks. Simpleness means having no tedious DIY process, but also reducing the frequency of oil injection and core replacement; and reliability is to avoid problems such as oil leakage and short circuit during in use. Today, I share with you such a great one manufactured by Tesla - TALLICA TANK.

Product Details:
Resistance: 0.18 ohm ( 60W - 110W ) TS - XX coil / 0.2 ohm ( 80 - 140W ) TS - S coil
Thread: 510 thread
Capacity: 6ml
Diameter: 26mm

Main Features:
1. Huge cloud and extremely dense flavor
2. Equipped with other 810 drip tip on the market
3. Slide filling system
4. Plug-n-pull coil change
5. The triangular air flow system

The tank is with the convenient slide filling system and the oil injection hole is large enough , which is convenient for various dropper. The inner pad with the seal and anti-slip function is fixed with a ball structure.

Its structure in the middle section is easily reminiscent of the RTA, since the atomizing space for most finished atomizers is inside the atomizing core. Therefore, its role is mainly to support the upper and lower convergence, lengthening the flue to finish non-destructive core change.

The atomizing core and the cover are fixed by pressing, so the replacement is very convenient.But when the atomizing core is disassembled, the electrode rubber ring is easy to falling off, so the stress point should be in the bottom groove of the atomizing core. After the atomizer is removed, you will find that the 6ml oil storage capacity is not limited to the glass warehouse, but also including the invisible space in the stainless steel cover.

There are some mesh heating wires in the atomizing core. With such a structure, heat generation can be made uniform, and the contact area between your liquid and the wires can be fully increased, so that you can get a full and balanced taste experience. The delicate cotton cores are layered and stacked to effectively disperse conductive fumes and ensure adequate liquid storage.

The larger base space provides smooth air intake conditions. The electrodes are two simple square bumps, which are also very convenient for cleaning and maintenance. With the cover structure in the middle section, this TALLICA TANK has a very strong potential of RBA, and if the vendor develops an adapted wires accessories, you will get wonderfull DIY experience.

The large storage space provides an effective guarantee for daily life. Due to its large area of mesh heat structure, you will get the experience with delicate taste and huge cloud.

With low resistance , the tank can match with the dual-electricity mod which will offer sufficient power. On the whole, the TALLICA TANK is a good choice with a rough design style and a delicate taste experience.

10% OFF for new users code:NEWVB10

 

[Tmart ecig]

There is a big booming of bottom- filling devices in the electronic cigarette industry in the late 2017. This stock has spread fiercely abroad in the country. HCIGAR was one of the domestic brands that introduced the bottom filling equipment earlier and always try to make the best unregulated box mod. Although the INBOX launched in the early stage did not successfully catch the domestic endorsement express train, it is enough to prove that HCIGAR is a very prescient brand.

The MAGIC BOX shared today is HCIGAR's newly introduced bottom-filling equipment set developed by the TOWIS team. I think it's among high-end mechanical mods. The package contains MAGIC BOX BF MOD, MAZE V1.1RDA, spare plastic bottle and finished coil accessories. This MAGIC BOX has two versions of carbon fiber veneer and the 3D magnetic panels. The only difference between them is the panel.

This is a mechanical bottom-filling equipment, but the details and performance of this best squonk mod is not the same as the most devices. The switch and the interface are hidden inside, so the whole structure looks more complete. And because of the window of the panel, it's very easy to open the panel and no need a strip

The pre-The milky white 7ML silicone bottle is designed with the two-layer metal cover of different sizes which can effectively stagger the finger force, making the refilling operation smoothly. The spare plastic bottle for distribution has a sealed lid, and you can directly use it as liquid storage bottle for out going . The two materials of the bottle have different feel during the extrusion and filling. You can select according to their own preferences.

Today we will talk about the 3D version . The panel has a thick embossed pattern and feels its uneven touch in the palm of your hand. The aesthetics of this textured wolf design is described by Hcigar as “Mysterious”.. However,if you like the simple feeling you can choose the version of the carbon fiber veneer, the appearance of the entire mod can be completely changed to a simple type.

The MAGIC BOX has a large fire button area and can be locked. Pushing the switch upwards to lock can avoid the risk of accidental misfires. The fire button's elasticity is not high, and it is more comfortable than many mechanical mods on the market. It's amazing to enjoy the process of finding authentic mechanical mods for sale.

There is a small depression in the bottom of the storage bottle. This position plays a significant role in removing the storage bottle. Because of the low hardness of the silicone bottle, it is more convenient to insert a finger into the groove to buckle the bottle. Although this design will increase the height of the box, it can be completely ignored.

The original atomizer is MAZE V1.1 RDA, which needs to be adjusted according to the intake air to determine the parameters of the coil. If the coil power is not enough,you will not get a full taste. Take a common set of mechanical pole data 22G/3/0/5 as example, this RDA performs very well with both clouds and flavor.

The inlet port of the atomizer is four-sided. In accordance with the characteristics of the silicone bottle, the MAGIC BOX can be used to gently and smoothly transport your vape liquid to the cotton. In combination with the compact volume compression of the MAZE V1.1 RDA, this suit is very economical when used.

However, some one will certainly say that the single-powered mod must be unfriendly. In fact, you can take a spare battery and enjoy your wonderful day.

 

[Tmart ecig]

Eleaf iStick Pico Baby Starter Kit with GS Baby Tank 2ml 1050mAh

10% OFF for NEWS USERS

vapingbison