Vapingdragon
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Thank you for replying.. the tank is glass, its a cl tank and its all in one device, its suppost to be leak proof. I believe the seals inside bottom of tank is not sealing correctly therefore leaking and causing the battery to fry. Its such a bummer, i only had it for a mnth.. makers of the cubis tank. Same kind.Is the tank made of plastic? If so is it possible that it cracked down near the bottom? Being top fill, top airflow seems unlikely to be leaking through air vents.
I wasn't sure if the tank was glass or plastic on that one, I know it's an all in one. It 'should' be sealed, so if it's leaking I'm not sure there's anything you can do to repair it. Any chance it's still under warranty? Hopefully Joyetech will fix it for you. Especially if there's any chance that it's a safety issue such as juice frying the board that offers the protection features and potentially allowing the battery pack to short. Not saying that's what will happen but it's one angle of approach where Joyetech may be a bit more concerned and perhaps more likely to help you out. Obviously safety is a serious concern.
I bought it on ebay. The seller does accept exchages within 30 days, which it is just under that. Crossing my fingers that i can exchange it for another. I did hear back from joyetech rep. They said it is very rare that happened. So not many have had issues like me. Thnk you for your suggestions, im gonna cross my fingers. I will say ive been vaping for over 5 years and i havnt had an issue like this, i guess i have been very lucky. Still love the egrip 2. And hoping to resolve this matter. Thnks again for replyingI wasn't sure if the tank was glass or plastic on that one, I know it's an all in one. It 'should' be sealed, so if it's leaking I'm not sure there's anything you can do to repair it. Any chance it's still under warranty? Hopefully Joyetech will fix it for you. Especially if there's any chance that it's a safety issue such as juice frying the board that offers the protection features and potentially allowing the battery pack to short. Not saying that's what will happen but it's one angle of approach where Joyetech may be a bit more concerned and perhaps more likely to help you out. Obviously safety is a serious concern.
Totally understand.. the tank isnt cracked. I believe its the sealant around the connection inside the tank thats faulty. It wont hold eliquid. Keeps draining thru inside of mod and out the vent. Sometimes lime every 2 days it tries to turn on. And u think its gonna work than boom. The moment u hit the fire button or plug the charger in it dies. Still prob isnt dry completely. But still if u cant put eliquid in the tank the mod is useless unless u use the tank adapter that came with it. To use any tank on top.. which is really cool addition they made.. but cant use it cause the battery will just glitch out. Im going to return it and prob just buy a different mod lime cubiod mini. Till they have a updated version perhaps. Idk.. thanks for replyWell that's the main problem with internal non replaceable tank systems, if the tank cracks the mod is toast.
Thank you for the reply!!! I forgot to update. I did return to Egrip 2 back to seller and did receive a refund!!. I decided to wait on repurchasing another Egrip till maybe later when they have possibly revised it.. or make a better one.. Instead I purchased a Cuboid mini, going to give that a go.. I am also considering the Kanger Cupti, looks great.. some good reviews out there, some bad. Like the pressure flooding the tank etc. But it does look great. Plus the rba option... thank you for all the support and feedback, for helping me..I would contact the seller and return, no way you should be having these problems! I have the egrip oled that when I don't wick the RBA base correctly it leaks, but I purchased the CS base(old style) and can use eLeaf gsair coils in it if I don't want to mess around with the RBA base.
Kanger just came out with the Cupti which is similar to the egrip and the nebox, maybe check that out too! There is a vendor here who sells the VU and looks very nice!
https://www.perfecthitejuice.com/products/cupti-full-starter-kit
So glad that you returned that egrip2 back to the seller and got a refund, hope you have much better luck with the Cuboid mini! Have not seen any reviews on the Cupti yet, too new to know any faults, like the egrip2. I love those types for size and looks, but if it malfunctions what good is it, right?Thank you for the reply!!! I forgot to update. I did return to Egrip 2 back to seller and did receive a refund!!. I decided to wait on repurchasing another Egrip till maybe later when they have possibly revised it.. or make a better one.. Instead I purchased a Cuboid mini, going to give that a go.. I am also considering the Kanger Cupti, looks great.. some good reviews out there, some bad. Like the pressure flooding the tank etc. But it does look great. Plus the rba option... thank you for all the support and feedback, for helping me..
I totally agree. Specially for just having it less than a mnth..So glad that you returned that egrip2 back to the seller and got a refund, hope you have much better luck with the Cuboid mini! Have not seen any reviews on the Cupti yet, too new to know any faults, like the egrip2. I love those types for size and looks, but if it malfunctions what good is it, right?
Sorry to say this but the Cuboid Mini can develop bad spitback issues. They can be resolved on a daily basis, but too much hassle for me.Thank you for the reply!!! I forgot to update. I did return to Egrip 2 back to seller and did receive a refund!!. I decided to wait on repurchasing another Egrip till maybe later when they have possibly revised it.. or make a better one.. Instead I purchased a Cuboid mini, going to give that a go.. I am also considering the Kanger Cupti, looks great.. some good reviews out there, some bad. Like the pressure flooding the tank etc. But it does look great. Plus the rba option... thank you for all the support and feedback, for helping me..
Thanks for replying... I have the cuboid, i totally get the spitback. I found a anti spitback drip tip called volcano.. on ebay anti-explosion.. and i bought that aswell i hope that helps the spitback..Sorry to say this but the Cuboid Mini can develop bad spitback issues. They can be resolved on a daily basis, but too much hassle for me.
I hope so if not if not l found a video on youtube with some fixes.Thanks for replying... I have the cuboid, i totally get the spitback. I found a anti spitback drip tip called volcano.. on ebay anti-explosion.. and i bought that aswell i hope that helps the spitback..
Thank you for the video link!!I hope so if not if not l found a video on youtube with some fixes.
Sent from my SM-G900F using Tapatalk
Any suggestions for a good tank and mod.?? Im a mouth 2 lung vaper. I can vape the subohms too,but usualy i turn the watts way down..I hope so if not if not l found a video on youtube with some fixes.
Sent from my SM-G900F using Tapatalk
Thank you. l didn't provide a video link. Looks like your Volcano takes care of the issueThank you for the video link!!