Become a Patron!

The Official #HandCheck Thread

dubya314

Platinum Contributor
Member For 5 Years
As I recall I think they were like 70 or 80 bucks. The design always intrigued me, but I never bought one because i didn't know anything about them and 70 or 80 bucks is not dirt cheap. Glad to hear it's good.

Ya know what's funny? The one squonk setup I have that doesn't leak just about at all is that Desire Cut with the 50 cent bottles from Kidney Puncher :confused: Go figure.
Agreed. That cut will just not leak. Sadly, for me, just not my fav in hand. I have learned for me, #1 feel in hand, #2 looks, #3 functionality :facepalm: Sad but true.
 

marter

VU Donator
Silver Contributor
Member For 4 Years
If you are ever gonna let go of that mod, I wouldn't mind being the first in line ;) Just sayin'. As far as wraps go, I did this. I had a group of batteries that were all 20amp, 3000 mah, I only use them is single cel mods I am pulling equal to or less than 20 amps. So, I don't care which they are, all good in the builds. I kept my Samsung 20S seperate, for anything pushing the 20 amp pull.. re-wrapped some of them as well, just keep em in a seperate column. Idk if I'm doing it "right", but 5 years of vaping and only two battery issues, both massively my fault. Totally different story....
The mod is only $20 at Armageddon (Florida Vapor Supply), but I had to buy the black/clear door and the white/black door to swap them. Actually I just checked and they have a white/clear door.

I've only been vaping since Feb so still trying to figure out what my system is. I'm trying to cycle my batteries so I don't keep using the same ones; put the most recent charged on the bottom of the stack, keeping singles vs. marrieds, etc. And I thought I was going to save money. :wait:
 

dubya314

Platinum Contributor
Member For 5 Years
The mod is only $20 at Armageddon (Florida Vapor Supply), but I had to buy the black/clear door and the white/black door to swap them. Actually I just checked and they have a white/clear door.

I've only been vaping since Feb so still trying to figure out what my system is. I'm trying to cycle my batteries so I don't keep using the same ones; put the most recent charged on the bottom of the stack, keeping singles vs. marrieds, etc. And I thought I was going to save money. :wait:
You are doing just fine, asking the right people I.E. (not me :facepalm:) Batt's, just do what works for you, imo. Married go in duel holders
1573885490779412105789.jpg
20700's next row, true 30 amp samsung 20's next row, all 20 amp 18650 the rest. Works for me :)
1573885662614369072973.jpg
 

Huckleberried

VU Donator
Diamond Contributor
Member For 5 Years
VU Patreon
You are doing just fine, asking the right people I.E. (not me :facepalm:) Batt's, just do what works for you, imo. Married go in duel holders
View attachment 149807
20700's next row, true 30 amp samsung 20's next row, all 20 amp 18650 the rest. Works for me :)
View attachment 149808
Where'd you get that stand??!

@marter, wrapping 5 batteries a little while ago took me 10-15 minutes. I don't normally let that many build up.
 

Mykreign

Platinum Contributor
Member For 5 Years
Y'all are killing me with the Armageddon stuff lol. I haven't squonked in many, many months but at the price, I'm still fighting not to buy anything. I'd also like to have the broadside from their site just because I've never had an authentic.

Drives me nuts that a mod I spent $200 on it now 40 though.

Anyway, Armageddon squonks were always my favorite and the only ones I held on to. Hardest hitting by a long shot but MAKE SURE you clean your contacts!

9943a6563dd97696172183cf8395be0e.jpg

39b4c59cd46855ace8ec76b92654cdce.jpg



Sent from my SM-G950U using Tapatalk
 

marter

VU Donator
Silver Contributor
Member For 4 Years
You are doing just fine, asking the right people I.E. (not me :facepalm:) Batt's, just do what works for you, imo. Married go in duel holders
View attachment 149807
20700's next row, true 30 amp samsung 20's next row, all 20 amp 18650 the rest. Works for me :)
View attachment 149808
Looks good. I keep mine in the dual holders, married or single. I have a Dymo label thing so I've been dating them (don't go there) and indicating S for single, M for married. I try to put the recently charged on the bottom of the stack to rotate them. See pics.
Where'd you get that stand??!

@marter, wrapping 5 batteries a little while ago took me 10-15 minutes. I don't normally let that many build up.
It's not the time, it's the decisions. Which wraps, what pattern/color, upside down or not for BBs or one of the pairs, yada yada. And don't they make them a little tight in some mods? Anyway, just haven't gone there yet.
 

Attachments

  • Batteries2.jpg
    Batteries2.jpg
    861 KB · Views: 15
  • Batteries1.jpg
    Batteries1.jpg
    974.4 KB · Views: 15

Jinx'd

Platinum Contributor
Member For 2 Years
Y'all are killing me with the Armageddon stuff lol. I haven't squonked in many, many months but at the price, I'm still fighting not to buy anything. I'd also like to have the broadside from their site just because I've never had an authentic.

Drives me nuts that a mod I spent $200 on it now 40 though.

Anyway, Armageddon squonks were always my favorite and the only ones I held on to. Hardest hitting by a long shot but MAKE SURE you clean your contacts!

9943a6563dd97696172183cf8395be0e.jpg

39b4c59cd46855ace8ec76b92654cdce.jpg



Sent from my SM-G950U using Tapatalk

DAMN, that ultom is SWEET !
 

Amber Petti

Platinum Contributor
Member For 1 Year
ECF Refugee
96AB3B3B-DF01-4135-B28A-835B3088BDC1.jpeg

Using my new baby today. See how I like it. So far so good. Battery life lasts me long and I’m getting nice smooth flavor! I don’t know now if my solo or this is my current fav yet... I want to upgrade my solo by getting the X for Christmas. Hoping the price drops by then.
 

R.Savage

Bronze Contributor
Member For 4 Years
Trying something new for myself with some old stuff. 7.5 wraps at 2.5 mm ID 24 awg kanthal . Rocking at 40 watts at .77 ohms.

All in an Ares MTL RTA with Dirty DAAWG juice at 6mg

With the eleaf Ikonn 220.

Not too shabby of a vape.
39b909f7af4621d267a202fc57c539a8.jpg


Sent from my SM-G975W using Tapatalk
 

gsmit1

Platinum Contributor
Member For 4 Years
My new Smok Mag P3 Kit in hand:

Hand_Check-20191116.JPG


This is a BIG mod. And fairly heavy. Works well for me because I have big hands. (I usually wear an XL glove.)
Terrible rushed shot, but there's no 2 ways about it. This one's a winner for what it wants to be. Has the new chip too. Yes, it's big and heavy, but the build quality is VERY good and the hand feel is superb. Same awesome touch screen as the Morph. My only real complaint is the animation on the unlock slider. Not a big deal, but I wish the animation could be disabled.
20191116_162031_cr.jpg
 

vuJim

Gold Contributor
Member For 4 Years
ECF Refugee
Reddit Exile
... there's no 2 ways about it. This one's a winner for what it wants to be. Has the new chip too. Yes, it's big and heavy, but the build quality is VERY good and the hand feel is superb. Same awesome touch screen as the Morph.
Agreed on every point. (Though I can't speak as to the Morph, as I don't have one.)

My only real complaint is the animation on the unlock slider. Not a big deal, but I wish the animation could be disabled.
I wondered about that, but I don't much tend to look at my mod unless I'm checking the wattage or battery level, or changing something, so it doesn't bother me.
 

Fictitious Character

Gold Contributor
Member For 4 Years
Terrible rushed shot, but there's no 2 ways about it. This one's a winner for what it wants to be. Has the new chip too. Yes, it's big and heavy, but the build quality is VERY good and the hand feel is superb. Same awesome touch screen as the Morph. My only real complaint is the animation on the unlock slider. Not a big deal, but I wish the animation could be disabled.
View attachment 149843
Smok takes a lot of crap but I always found their mods to be reliable. Plus after they donated 500k to the VTA recently that gets some respect.
 

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
Damn...thats a sexy red..

Sent from a very cloudy room
They only had 2 left. Been a while since I've been into a B&M. The kid goes, we've had those for a long time, you have to know how to build to use those they don't have a chip. I said yeah, ohms law, I'm good as I showed him my Ant mech. He had no idea what it was. He also told me nobody squonks anymore, lol. I said yeah judging by the 50 different pod system and starter kits you have I'd have to agree for your clientele. Then I asked for more of a discount to help him create more shelf space and you know since nobody uses these ;)
On the way out I showed him VU on my phone and suggested he check it out.

20191117_161438.jpg
 

bx10r

Platinum Contributor
Member For 4 Years
They only had 2 left. Been a while since I've been into a B&M. The kid goes, we've had those for a long time, you have to know how to build to use those they don't have a chip. I said yeah, ohms law, I'm good as I showed him my Ant mech. He had no idea what it was. He also told me nobody squonks anymore, lol. I said yeah judging by the 50 different pod system and starter kits you have I'd have to agree for your clientele. Then I asked for more of a discount to help him create more shelf space and you know since nobody uses these ;)
On the way out I showed him VU on my phone and suggested he check it out.

View attachment 149896
Lol...dont u love when someone assumes u dont know stuff? And fkin pods...no thanks. I VAPE

Sent from a very cloudy room
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
They only had 2 left. Been a while since I've been into a B&M. The kid goes, we've had those for a long time, you have to know how to build to use those they don't have a chip. I said yeah, ohms law, I'm good as I showed him my Ant mech. He had no idea what it was. He also told me nobody squonks anymore, lol. I said yeah judging by the 50 different pod system and starter kits you have I'd have to agree for your clientele. Then I asked for more of a discount to help him create more shelf space and you know since nobody uses these ;)
On the way out I showed him VU on my phone and suggested he check it out.

View attachment 149896

So, why wish him on us here? :giggle:
 

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
They only had 2 left. Been a while since I've been into a B&M. The kid goes, we've had those for a long time, you have to know how to build to use those they don't have a chip. I said yeah, ohms law, I'm good as I showed him my Ant mech. He had no idea what it was. He also told me nobody squonks anymore, lol. I said yeah judging by the 50 different pod system and starter kits you have I'd have to agree for your clientele. Then I asked for more of a discount to help him create more shelf space and you know since nobody uses these ;)
On the way out I showed him VU on my phone and suggested he check it out.

View attachment 149896
I love making the staff at my local b &m look n feel stupid. Makes my day
 

VU Sponsors

Top