Become a Patron!

The Official #HandCheck Thread

gsmit1

gsmit1

Platinum Contributor
Member For 4 Years
gadget! said:
I'm here

There's looks good with the black.

61c416f1cd2ce24c033d41814648ab48.jpg


Sent from a Galaxy far far away
Click to expand...
Looks awesome. My Asgard Mini has been sitting in the Detroit sorting facility on the river 20 miles from here for 11 days :(
 
Jinx'd

Jinx'd

Platinum Contributor
Member For 2 Years
Don29palms said:
I haven't seen many of the Head Shot RDAs. Very nice.
Click to expand...

neither have i. then in 2 days, i have 3 :facepalm::giggle:. and 1 of them is a freak'n copper !

and i just found out the are 2 same, but different Headshots. AND, i just found out there are 2 "totally different" purge decks.
this is a clone, but a fairly good clone of an early purge deck. carnage caps do not fit it.

20200529_164044.jpg
 
~Don~

~Don~

Platinum Contributor
Member For 5 Years
gsmit1 said:
Well, I gotta say. This RDA does live up to the hype and popularity. With a District 5 one tip, which I bought specifically for this setup, on the Atom.
View attachment 162186
Click to expand...

I like it, one of the more conductive RDAs out there, especially with the silver pin

I do dislike how limited the juice well is though, and it easily floods...

And the factory drip tips are just about junk if you run high wattage.

Totally kicks ass though with 2.5mm .11 Aliens just a scoot away from the Ultem Air dam


Sent from my iPhone using Tapatalk
 
gsmit1

gsmit1

Platinum Contributor
Member For 4 Years
gadget! said:
Best RDA I've ever used and it's perfect for that setup!
Click to expand...
~Don~ said:
I like it, one of the more conductive RDAs out there, especially with the silver pin

I do dislike how limited the juice well is though, and it easily floods...

And the factory drip tips are just about junk if you run high wattage.

Totally kicks ass though with 2.5mm .11 Aliens just a scoot away from the Ultem Air dam
Click to expand...
I think the key to the wicking is to be sparing on the tails and keep it in those triangular ports on the corners of the deck. Definitely a match made in heaven with this mod. This build is 2.5mm Ni80 fused claptions @ .19. A bit higher than I usually go for a single 30T, but it's rockin hard. This is one that can manage impressive cloud production AND juicy flavor at the same time.

I wish VC sold spare ultem inserts though. I'm not afraid of melting it, and it will probably take a while, but I do see it wearing out at some point with it turning and locking both into the cap and into the deck.
20200601_011742_cr.jpg
 
Last edited:
Don29palms

Don29palms

Silver Contributor
Member For 3 Years
ECF Refugee
Unlisted Vendor
gsmit1 said:
I think the key to the wicking is to be sparing on the tails and keep it in those triangular ports on the corners of the deck. Definitely a match made in heaven with this mod. This build is 2.5mm Ni80 fused claptions @ .19. A bit higher than I usually go for a single 30T, but it's rockin hard. This is one that can manage impressive cloud production AND juicy flavor at the same time.

I wish VC sold spare ultem inserts though. I'm not afraid of melting it, and it will probably take a while, but I do see it wearing out at some point with it turning and locking both into the cap and into the deck.
View attachment 162189
Click to expand...
You guys are going to make me get an Asgard.
 
~Don~

~Don~

Platinum Contributor
Member For 5 Years
gsmit1 said:
I think the key to the wicking is to be sparing on the tails and keep it in those triangular ports on the corners of the deck. Definitely a match made in heaven with this mod. This build is 2.5mm Ni80 fused claptions @ .19. A bit higher than I usually go for a single 30T, but it's rockin hard. This is one that can manage impressive cloud production AND juicy flavor at the same time.

I wish VC sold spare ultem inserts though. I'm not afraid of melting it, and it will probably take a while, but I do see it wearing out at some point with it turning and locking both into the cap and into the deck.
View attachment 162189
Click to expand...

It’s more than likely me not knowing how to drip or build

Seriously, when I use the OG Grip with the Asgard after using let’s say the Viking Grip with the Nightmare RDA or the 25mm Exile RDA with Ultem cap, I flood the Asgard.

Mostly for I get used to the blaaah squeeze worth of juice capability of the later, then I take a hot spitting fire rip... the above plus I don’t use needle point type tips on bottles but rather these

59cc5c4b34173d6528cb17c81e2ba774.jpg



Sent from my iPhone using Tapatalk
 
Vape Fan

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
gsmit1 said:
Well :rolleyes: Isn't that nice. Don't know how I missed that. Thanks :)

EDIT: Thanks, but there's no way I'm paying 10 bucks for shipping for an item that weighs maybe a gram. I'll take my chances.
Click to expand...
I hear ya. Same reason I didn't order one. Maybe as an add on, same w/deck upgrade, but they're out of any mod I would get.
 
dubya314

dubya314

Platinum Contributor
Member For 5 Years
Carambrda

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Jinx'd said:
i made these. 3x26/36 n80 4 wrap claptons .08 for both. they are Fugly but are working pretty good. maybe a little to good.
Click to expand...
4×26/36 Ni80 at 4 wraps, 3mm ID also gives .08 for both. The ONE Tip that @gsmit1 also uses is just perfect for such a hot build, but the airflow adjustment on the Asgard Mini has to be very precise for that to work nicely, and, if you get it just right, then the vape is neither too hot nor diluted, but if you try to pinch your lips around the edge of the drip tip even in the slightest, then after a short while you'll be able to peel your skin off of the inside of your lips. :giggle:

asgard mini.jpg ultem Asgard Mini.jpg
 
Jinx'd

Jinx'd

Platinum Contributor
Member For 2 Years
Carambrda said:
4×26/36 Ni80 at 4 wraps, 3mm ID also gives .08 for both. The ONE Tip that @gsmit1 also uses is just perfect for such a hot build, but the airflow adjustment on the Asgard Mini has to be very precise for that to work nicely, and, if you get it just right, then the vape is neither too hot nor diluted, but if you try to pinch your lips around the edge of the drip tip even in the slightest, then after a short while you'll be able to peel your skin off of the inside of your lips. :giggle:

View attachment 162216 View attachment 162217
Click to expand...

i will remember that. but i have only made 2 sticks of 3 core, so i need a lot more practice before doing a 4.

i do not yet have a mini, i am looking for a copper one for my copper XXX stack. i am probably going to get a Nightmare when the right deal comes along.
 
gadget!

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
dubya314 said:
Not knocking, but I don't understand. What is different than using any old plastic bottle of juice?
Click to expand...
With a regular old plastic drip bottle I tend to flood the deck myself. With the EZ Dripper for most of my RDAs I give it 3 pumps and I'm good.
Maybe they aren't for you but for me it's like @bx10r said, it's a game changer.

Sent from a Galaxy far far away
 
Carambrda

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Jinx'd said:
i will remember that. but i have only made 2 sticks of 3 core, so i need a lot more practice before doing a 4.

i do not yet have a mini, i am looking for a copper one for my copper XXX stack. i am probably going to get a Nightmare when the right deal comes along.
Click to expand...
I have the Nightmare in black, SS, and blue. You might also want to check out the 28mm version of the Valhalla, as the Nightmare build deck design is a variation of the original (i.e. the 38mm version) Valhalla.
 
Vape Fan

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
gadget! said:
With a regular old plastic drip bottle I tend to flood the deck myself. With the EZ Dripper for most of my RDAs I give it 3 pumps and I'm good.
Maybe they aren't for you but for me it's like @bx10r said, it's a game changer.

Sent from a Galaxy far far away
Click to expand...
So the amount dispersed can't be adjusted?...that would be cool.
 
Tornadoalleydeb

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
gsmit1 said:
Well, I gotta say. This RDA does live up to the hype and popularity. With a District 5 one tip, which I bought specifically for this setup, on the Atom.
View attachment 162186
Click to expand...
I hope so, I just ordered one :) Also in black. If this thing whistles or has a crappy draw I am gonna yell at ALL of you lol. Bunch of enablers. :blowkiss::blowkiss:
 
You must log in or register to reply here.

VU Sponsors

Top