Become a Patron!
The Official #HandCheck Thread
- Thread starter Chris
- Start date
That's a big boy, I'll bet that hits like a ?
You could definitely go lower than me, I just don't like it too hot. Vaping perfect for me @.38
I can't hold no more than that in my lungs anyway 
Get an Asgard Mini and a series deck. I take full responsibility for the consequences. ?You could definitely go lower than me, I just don't like it too hot. Vaping perfect for me @.38
Or just throw a series build in the stock Assmini deck like my dumb ass! HahahaGet an Asgard Mini and a series deck. I take full responsibility for the consequences.
Dual parallel 26g Ni80 3.5mm ID 12 wraps @ .35Ω's!
~Wesyde1
I've owned one series mech and sold it within a month. I'm a rdl vaper but once in a while enjoy pulling out a tube and blowing clouds. The Vindicator with a 40T, dual coil at .20 is perfectly fine for this guyOn a single? That's tootle puffin for me
.38 in series is still 140 watts lol.
Last edited:
Looks like a loooong ramp up time there!Or just throw a series build in the stock Assmini deck like my dumb ass! Hahaha
Dual parallel 26g Ni80 3.5mm ID 12 wraps @ .35Ω's!
~Wesyde1
On the Arcless Stack? That was instant FIYAH!!! Haha was actually pretty hot for the Assmini but that same build in the Asslarge was Perfect!!!
~Wesyde1
.3 on this single coil set up with a 40T is also just fine. This doesn't hit like an SQ but it's second best for mech squonks that I've tried. The thing is that I've moved away from squonking for the most part, maybe it's laziness and being able to fill a tank.On a single? That's tootle puffin for me
.38 in series is still 140 watts lol.
I only looked at the picture of the deck and build, lol. Yeah, on that rig I imagine they'd be glowing red pretty quick!
That one is nice, I like the white!Nice! Just traded this one the other day to my buddy
~Wesyde1
What did you get back?
I'll tell you something about that coating they use at Vicious Ant, it's really good.Nice! Just traded this one the other day to my buddy
~Wesyde1
Shortly after getting mine I was playing around with the contact to get a shorter throw. I guess I bent it in too far and after a hit I set it down, it was autofiring and I didn't know it until I went to pick it up again. The battery was venting, I unscrewed the cap and while still holding the mod fired the battery outside but held onto the mod. I was really worried everything that leaked from the battery had damaged the inside, luckily nothing had touched the door and it cleaned up like new. Maybe I got it quick enough, but their coating held up like a champ.
You like your white obviously ?RCM SHRTGN
~Wesyde1
Killer set up right there
Those are the rhe only 2 white mods I've ever owned haha and now just the one! HahaYou like your white obviously
Killer set up right there
~Wesyde1
Love that set up. The B2K is one of my all time favorite single coil rda's.
I'm hopelessly addicted to mine it seems. It is almost perfect for me and how I vape. I would really love to find something else that is similar, but everything I try ends up on my shelf and one of my B2Ks always sneak back on top of the mod I'm using. Hopefully persistence pays off and I find something new that I like just as much.
For some reason I thought the B2K was a dual coil atty.
Sent from my LGL722DL using Tapatalk
No sir, a fantastic single coil rda that's great with squonking. It was designed by Mr.TRVP up here in Canada, I keep bugging him to make a new version because you can't find a B2K anymore. I worry about the day mine falls apart from use or I strip a post, lol
I haven't found a single coil atty that matches the af of the B2K. I've had the Citadel, Entheon, KRMA, the list goes on. The three I mentioned were my favorite aside from the B2K but all far more restrictive and just not the same.
A new version would be AMAZING! I have literally used my B2K daily for well over a year straight.
I have about 50 RDAs on my shelf that I can't help but compare to the B2K. None of them have the airflow this does, and that is the only reason I can't use them for very long.
Something totally alien to this Billet Box boy. A purge Side Piece Slim. I did manage to get a build in it. It's running dual 3.5mm Kanthal coils that come out to 0.98 ohms. I need to drop that down a bit.
The kit included a Purge Rev-25 brass cap and the Purge X 25mm rda. I didn't like the vape with the brass cap. The Purge X seems better than average with the perforated top cap. I have an Ultem cap on order for the Asgard Mini. I think it will look and vape a lot better.
The kit included a Purge Rev-25 brass cap and the Purge X 25mm rda. I didn't like the vape with the brass cap. The Purge X seems better than average with the perforated top cap. I have an Ultem cap on order for the Asgard Mini. I think it will look and vape a lot better.
Last edited:
That's a rowdy one!
.29 Ni80 Claptons in the 2 post 24mm Kennedy on the Unicorn MDX stack
Last edited:
Always had an eye on some various color of these, love em. Also always kinda wondered, could it be considered a sbs???
Sent from my SM-S767VL using Tapatalk
I would not want to inhale that!
Me either. I'd definitely put the cap on first.
It's dual battery mod running in series so it's outputting 8.4 volts to start. So my build is at 72 watts. I'd like to get it at around 100 watts or little more to start.
Sooo...it depends on your definition of an SBS.
I have an Evo X on order, its the lower model but ive been waiting for them to make em, I have a cpl buddies who ordered the DNA versions from the 1st batch who still haven't received them yet they are available from another site. Kinda disappointed so far by 67 mods the way they have handled things and even tho they still haven't fulfilled all the orders they keep posting new things they want to make like they are getting way ahead of themselves...So this is not my hand, although I'm thoroughly depressed I'd been so busy of late and missed out on the white or especially the stormtrooper one but think I'll go grab the all black while I still can
Sent from my SM-S767VL using Tapatalk
~Wesyde1
That is gooberbutternuts for you.
Raphael mathonet is a tool...
He can design, but he’s a douche.
He’s just a cunt hair below Odis IMO and the delays while selling other shit
Agree with this statement 1000%! Haha but I still have high hopes for my Evo X so hopefully its not for sale right after I get it...when or if I ever do get it hahaThat is gooberbutternuts for you.
Raphael mathonet is a tool...
He can design, but he’s a douche.
He’s just a cunt hair below Odis IMO and the delays while selling other shit
~Wesyde1
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Squonk check
