Become a Patron!

The Official #HandCheck Thread

ProlineVaper

VU Donator
Silver Contributor
Member For 3 Years
ECF Refugee
VU Patreon
So I tried the Augvape Templar on the Fumytech Pure BF, but the single 18650 wasn't pushing a dual coil setup. So I checked the Box of Misfit Toys and found an old Eleaf Pico Squeeze 2 I haven't haven't seen in about a year or so. After cleaning up the RDA and installing a .5Ω build I put it on the Pure BF. Filled it with one of my favorite DIY ...Frozen Unicorn Vomit 6mg. Awesome! Looks great and I didn't have to order another RDA. I think I lucked out and got the Squeeze 2 for about $25 on clearance.
1091c123b563e1a31808716e5f81cd08.jpg
a23f51f334facf924dd9223be3f460d0.jpg
94d5c8eb5d62cf6ae689f0d4afff1772.jpg


Sent from my LGL722DL using Tapatalk
 

ProlineVaper

VU Donator
Silver Contributor
Member For 3 Years
ECF Refugee
VU Patreon
Fumytech Pure BF with the Eleaf Coral 2 RDA. Can't put it down! This squonk mod is so comfor9in the hand. Feels like holding a piece of polished ivory. Not an edge anywhere on it, everything is rounded for comfort.

The bottle setup is ingenious! The silicon bottle attaches to a cap with fill ports and screws down into a sleeve. Then a top cap with a 510 hole screws on to seal bottle. Then then align the bottle with notches and slide into mod to seal if onto 510 assembly inside mod and turn 1/4 turn to lock into place. AWESOME!

Don't know if there are others similar to this out there, but this is my first. Best part...NO MESS from accidentally squeezing bottle while I stalling it!
de963a68aa723fd470a3f7e2de1f0ab6.jpg
00c025971c17b690bcb228ac4c14d8e3.jpg
16194cdd81841d94e08f116e6950bf6e.jpg
8a80f6d24b8d8b7092223a27ee7d0ea0.jpg
8a06403d95554c6351ec44e889df2b26.jpg
e4087317715b4616bc69c77f3315afce.jpg


Sent from my LGL722DL using Tapatalk
 

Tornadoalleydeb

Rescuing animals. Saving one fur-kid at a time.
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Fumytech Pure BF with the Eleaf Coral 2 RDA. Can't put it down! This squonk mod is so comfor9in the hand. Feels like holding a piece of polished ivory. Not an edge anywhere on it, everything is rounded for comfort.

The bottle setup is ingenious! The silicon bottle attaches to a cap with fill ports and screws down into a sleeve. Then a top cap with a 510 hole screws on to seal bottle. Then then align the bottle with notches and slide into mod to seal if onto 510 assembly inside mod and turn 1/4 turn to lock into place. AWESOME!

Don't know if there are others similar to this out there, but this is my first. Best part...NO MESS from accidentally squeezing bottle while I stalling it!
de963a68aa723fd470a3f7e2de1f0ab6.jpg
00c025971c17b690bcb228ac4c14d8e3.jpg
16194cdd81841d94e08f116e6950bf6e.jpg
8a80f6d24b8d8b7092223a27ee7d0ea0.jpg
8a06403d95554c6351ec44e889df2b26.jpg
e4087317715b4616bc69c77f3315afce.jpg


Sent from my LGL722DL using Tapatalk
Looks like the bottle is similar to a Furyan setup maybe?


IMG_20191208_142209975.jpg
 

VU Sponsors

Top