You really should grab one while they're 10 BUCKS
Become a Patron!
The official VAPE MAIL!!!!!!! thread #2
- Thread starter Countrypami
- Start date
-
- Tags
- vape mail
Sorry, Deb. I was only half serious. Let’s be friends again for the holidays, please.
i just tried to order = no shipping to IL = morons
I was going to say that I could ship it to you, but by that time you'd lose most of the savings
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I was going to say that I could ship it to you, but by that time you'd lose most of the savings
I thought they were sold out earlier when I looked. Checking again...
Well apparently not.
. Senior moment.Anyway, Axial with shipping when I ordered mine was $13.59. Second leg of shipping (first class) would be about $3.75. Still a great deal, still less than $20.
Last edited:
I was going to say that I could ship it to you, but by that time you'd lose most of the savings
i know you would, Thanx. not a big deal not having 1, i have plenty of shit as it is already.
well Thank You, Sir. but like i said, its not a big deal.
i bet in the Arkansas Eliquid case, its not laws, its tax's.
Still a really good deal at $20
This was actually vape mail from Sunday but for undisclosed reasons I didn't post it the day I got it.
This was a gift from @Tall Pines, I was speechless when I opened it.
The Unicorn Bastard MDX
Dual 21700
Unicorn 26mm RDA
Matching switch and drip tip
And it does hit like a truck...
A great big MFn Truck!
Sent from a Galaxy far far away!
This was a gift from @Tall Pines, I was speechless when I opened it.
The Unicorn Bastard MDX
Dual 21700
Unicorn 26mm RDA
Matching switch and drip tip
And it does hit like a truck...
A great big MFn Truck!
Sent from a Galaxy far far away!
Last edited:
Damn! they hooked you up. I keep getting the run around about the squonk pins for the last two Zion RDAs that were send in ziplock bags and not the factory packaging. Didn't come with the spares bag. Wish they would have said this before the even sent them. I've been told twice now to call him back next week. I'd be really pissed if I had paid more than $5 for them, but without squonk pins they are useless to me.Xmas eve mail
Gift from FVS, Armegeddon hat
My purchases...immortal modz hat, shirt, grip mod and an exile rda i got with accumulated points. Also a Trinity glass bullet cap for the redemption..merrxy xmas to me
Sent from a very cloudy room
Didn't get it yet, but wanted to share an awesome deal with everyone. I just ordered one for my collection from eightvape.com. An authentic Purge Mods Slam Piece for $50! I was a little disappointed that I missed out on the kit for $50 though. Hopefully I helped someone out.
Sent from my LGL722DL using Tapatalk
Sent from my LGL722DL using Tapatalk
I live in Illinois also and won't ship to me either.
I contacted them about it twice and they still never responded.
F**K them.
That was a good deal. Put one in my cart, blinked and came back, gone. Oh well.Didn't get it yet, but wanted to share an awesome deal with everyone. I just ordered one for my collection from eightvape.com. An authentic Purge Mods Slam Piece for $50! I was a little disappointed that I missed out on the kit for $50 though. Hopefully I helped someone out.
Sent from my LGL722DL using Tapatalk
Merry Christmas.
Sorry you missed it.
I went ahead and ordered the Shot RDA (clone) from 2Fdeal to match it until I can afford an authentic one. The cheapest I could find an authentic Shot RDA was $99.
Sent from my LGL722DL using Tapatalk
Sorry not sorry. I needed that like I needed another hole in my wallet. Glad you got in on it.
I want to continue to believe this, but I'm starting to believe it's based on the amount of money spent. Hope I'm wrong, but when you sell something and don't tell the customer that it isn't complete that's just not right. It doesn't matter if the item is on sale for $5 or $250. I'm not worried about the $10, but had I known that I wasn't getting the squonk pins I would have bought another item. Given his track record I was half expecting him to at least make the attempt to make it up somehow, but all I'm getting is I'm still trying to find them call me back next week.
Just let him know vaping underground is where all his new business came from and we see how difficult he's being because of 2 squonk pins. Word of mouth is a bitch. You spend a lot you get good service. You spend 10 bucks you get chinglish
Damn. Whether 1 or 1000. I'm with you. Hopefully he'll make it right
Sent from a very cloudy room
Last edited:
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Regardless of all this, if you don't get it worked out with him, I just got a pack of 10 Wasp Nano squonk pins. If they'll fit, I'll gladly send two of them to you. Do you have a WN to try the pin? These are Unicorn RDAs you need pins for?
Last edited:
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
This isn't today's vape mail - an iJust S stick mod kit that's been here for a month or so - I decided to keep it instead of giving to my daughter for her fella. He quit vaping (quit everything, yay him!) so I'm keeping it. And.
I ordered two packs of Vaporesso cCell 0.6 ohm ceramic coils for it, so I switched the coil out and primed it. Had a bit of a time with the tank itself, finally had to resort to channel locks to get the filler cap off, but once I finally got it all apart, set up, and put back together, well DAMN. This is a nice tank! These coils are great - wonderful flavor and vapor. It takes an engineer to figure out the friggin airflow, and I'm still working on that, but I am impressed with this thing even if it has been something of a PITA to get set up.
I think I paid something under $13 for the kit at VaporL a while back, so that makes it even better.
Have several Triton RTAs around here that I can use in this tank when I've used up these cCell coils. However, if these things last like the 0.9 ohm ones I used before, two packs of coils will last me a year or more, especially since I'm only using them in this one device.
A very good value, it seems anyway, for the money spent. And no leaking so far. Yay! This will be my new portable device, along with the two iJoy Mercury pod units.
ETA: 3000mAh battery in this thing!
Stock pic:
I ordered two packs of Vaporesso cCell 0.6 ohm ceramic coils for it, so I switched the coil out and primed it. Had a bit of a time with the tank itself, finally had to resort to channel locks to get the filler cap off, but once I finally got it all apart, set up, and put back together, well DAMN. This is a nice tank! These coils are great - wonderful flavor and vapor. It takes an engineer to figure out the friggin airflow, and I'm still working on that, but I am impressed with this thing even if it has been something of a PITA to get set up.
I think I paid something under $13 for the kit at VaporL a while back, so that makes it even better.
Have several Triton RTAs around here that I can use in this tank when I've used up these cCell coils. However, if these things last like the 0.9 ohm ones I used before, two packs of coils will last me a year or more, especially since I'm only using them in this one device.
A very good value, it seems anyway, for the money spent. And no leaking so far. Yay! This will be my new portable device, along with the two iJoy Mercury pod units.
ETA: 3000mAh battery in this thing!
Stock pic:
Last edited:
I'm not that guy, but true colors always arise. I hope I'm wrong about him, but after seeing all the freebies he hooked up bx10r (who soent a lot more than I) with the evidence is growing.
Me too but my hope is growing thin. I'll call him again in a couple of days for one last chance.
It's the Zion RDA. I sold all of my Wasps, but those pins may fit.
take that pin out and measure it with calipers or mic if you can. then post pics.
I almost wept when I missed that one. That might be the best deal I ever saw on anything.Didn't get it yet, but wanted to share an awesome deal with everyone. I just ordered one for my collection from eightvape.com. An authentic Purge Mods Slam Piece for $50! I was a little disappointed that I missed out on the kit for $50 though. Hopefully I helped someone out.
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Deb has both RDAs and she just PM'd me to say they fit.
@DonBaldy if you'll PM me a mailing address, I'll send you a couple of pins.
And on the subject of vape mail and Deb, her generosity strikes again! I got a package today with a beautiful black Dvarw DL and about a dozen mixing flavors from her. I've already built the Dvarw and filled it up with my new mix, Nutty Coconut, and it is stellar!
Thanks ever so much @debinnv !!!!
Another C2MNT but this time in a not so black...matches closer to the Candy Gray on the Overlord than it did on the DBv3
Had to extend the 510 pin on this one too...and remove the coating from the 510 pin as I did the Stainless one...
3.63v out of the box
3.77v after taking off the coating
Sent from my iPhone using Tapatalk
Had to extend the 510 pin on this one too...and remove the coating from the 510 pin as I did the Stainless one...
3.63v out of the box
3.77v after taking off the coating
Sent from my iPhone using Tapatalk
It's like Christmas all over again. When the mailman came today
This was actually vape mail from Sunday but for undisclosed reasons I didn't post it the day I got it.
This was a gift from @Tall Pines, I was speechless when I opened it.
The Bastard MDX from Armageddon
Dual 21700
Unicorn 26mm RDA
Matching switch and drip tip
And it does hit like a truck...
A great big MFn Truck!
Sent from a Galaxy far far away!
Looks like a sweet setup my friend and when you showed it to me firing like a cannon. All I could say was dammmn
Got 2 shipments from Eightvape and 1 from Asmodus in today! Eightvape has been having some awesome holiday sales! I think I still have 2 or 3 more orders coming from them. Picked up the Prince RBAs for $.99 a piece and the Ijoy RTA decks for $.10 a piece! I-priv kit for @ $20! Just started buying from Asmodus and so far, Im not too disappointed. They sent the wrong tank with this order, but hopefully they will make good on it and send me the Bunker I ordered. They give me 30% off next order and a free drip tip every time I place an order. All in all a good haul today. Still have quite a bit of Xmas sale stuff I'm waiting on...
Sent from my LGL722DL using Tapatalk
Sent from my LGL722DL using Tapatalk
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Ooooo nice! Let us know what you think!
got to the menu ...erm think I’ll leave it in power mode for a bit lol
really is a lovely box though, very smooth performer as you’d expect
SnapDragon NY
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
Yes I've heard the manual is extensive lol!got to the menu ...erm think I’ll leave it in power mode for a bit lol
1 suggestion to ease things, change the screen on timer first. Default it turns off in 3 seconds when going through the menu, most annoying
Congrats on the Dani, they are wonderful mods
Sent from my iPhone using Tapatalk
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
1 suggestion to ease things, change the screen on timer first. Default it turns off in 3 seconds when going through the menu, most annoying
Congrats on the Dani, they are wonderful mods
Sent from my iPhone using Tapatalk
cool thanks I’ll look up the manual ....Yeah I noticed that ...get onto a setting and the damn things goes off ...start all again ....
like a game of Simon says at the moment hahaha
cool thanks I’ll look up the manual ....Yeah I noticed that ...get onto a setting and the damn things goes off ...start all again ....
If you have questions I’ll give it a shot
Sent from my iPhone using Tapatalk
This came in just now...
Not as good voltage wise compared to the Overlord, but what reads 3.77v is 3.74v
$66 ($49 mod only) shipped compared to $204
Overlord Price per Volt = $54
Arcless Price per Volt = $17.64
Button doesn't screw on all the way flush though, but its not super noticeable, well I noticed it right away, but I nitpick everything.
I am probably going to take the switch apart, and polish the rough silver plating... you'd be surprised just doing that even by hand using only a wash cloth can increase voltage a few... but I will micro-mesh it to 20k grit... the plating is not smooth... but its China, and its a cheap mech, so sort of expected... I feel after I do this it will probably surpass the Overlord in voltage... Spring is on the light side, but its not horrible at all... used way softer buttons on mechs (AV-Able(magnet), Timekeeper(magnet), SatMod(Spring))
Overall... if you have $66 and want a 186,207,217 stacked mech... don't hesitate... this thing first impressions is a winner.
EDIT: Well I cleaned and polished the switch...
Found some shavings inside, really weird place for it too lol...
Went up a few points... hits .03v better than the Overlord, rather than -.03v LOL
you mech heads that may not know... a 30a build sags a 30T to 3.87v... with no voltage loss.. my coils are reading .13Ω or 32.31a
32a is probably that .07v missing
Not as good voltage wise compared to the Overlord, but what reads 3.77v is 3.74v
$66 ($49 mod only) shipped compared to $204
Overlord Price per Volt = $54
Arcless Price per Volt = $17.64
Button doesn't screw on all the way flush though, but its not super noticeable, well I noticed it right away, but I nitpick everything.
I am probably going to take the switch apart, and polish the rough silver plating... you'd be surprised just doing that even by hand using only a wash cloth can increase voltage a few... but I will micro-mesh it to 20k grit... the plating is not smooth... but its China, and its a cheap mech, so sort of expected... I feel after I do this it will probably surpass the Overlord in voltage... Spring is on the light side, but its not horrible at all... used way softer buttons on mechs (AV-Able(magnet), Timekeeper(magnet), SatMod(Spring))
Overall... if you have $66 and want a 186,207,217 stacked mech... don't hesitate... this thing first impressions is a winner.
EDIT: Well I cleaned and polished the switch...
Found some shavings inside, really weird place for it too lol...
Went up a few points... hits .03v better than the Overlord, rather than -.03v LOL
you mech heads that may not know... a 30a build sags a 30T to 3.87v... with no voltage loss.. my coils are reading .13Ω or 32.31a
32a is probably that .07v missing
Last edited:
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
That is a sexy beast. Dayum!!!
This came in just now...
View attachment 152225
Not as good voltage wise compared to the Overlord, but what reads 3.77v is 3.74v
$66 ($49 mod only) shipped compared to $204
Overlord Price per Volt = $54
Arcless Price per Volt = $17.64
Button doesn't screw on all the way flush though, but its not super noticeable, well I noticed it right away, but I nitpick everything.
View attachment 152226
I am probably going to take the switch apart, and polish the rough silver plating... you'd be surprised just doing that even by hand using only a wash cloth can increase voltage a few... but I will micro-mesh it to 20k grit... the plating is not smooth... but its China, and its a cheap mech, so sort of expected... I feel after I do this it will probably surpass the Overlord in voltage... Spring is on the light side, but its not horrible at all... used way softer buttons on mechs (AV-Able(magnet), Timekeeper(magnet), SatMod(Spring))
Overall... if you have $66 and want a 186,207,217 stacked mech... don't hesitate... this thing first impressions is a winner.
That looks nice! I thought I was going to have to multiply volts for the price!
I've had my eye on that mod for a while.This came in just now...
View attachment 152225
Not as good voltage wise compared to the Overlord, but what reads 3.77v is 3.74v
$66 ($49 mod only) shipped compared to $204
Overlord Price per Volt = $54
Arcless Price per Volt = $17.64
Button doesn't screw on all the way flush though, but its not super noticeable, well I noticed it right away, but I nitpick everything.
View attachment 152226
I am probably going to take the switch apart, and polish the rough silver plating... you'd be surprised just doing that even by hand using only a wash cloth can increase voltage a few... but I will micro-mesh it to 20k grit... the plating is not smooth... but its China, and its a cheap mech, so sort of expected... I feel after I do this it will probably surpass the Overlord in voltage... Spring is on the light side, but its not horrible at all... used way softer buttons on mechs (AV-Able(magnet), Timekeeper(magnet), SatMod(Spring))
Overall... if you have $66 and want a 186,207,217 stacked mech... don't hesitate... this thing first impressions is a winner.
EDIT: Well I cleaned and polished the switch...
Found some shavings inside, really weird place for it too lol...
View attachment 152228
View attachment 152227
Went up a few points... hits .03v better than the Overlord, rather than -.03v LOL
you mech heads that may not know... a 30a build sags a 30T to 3.87v... with no voltage loss.. my coils are reading .13Ω or 32.31a
32a is probably that .07v missing
Get one!
I got mine from Vape Crypto (Edit) think they are a vendor here also if I recall correctly
I ordered it Christmas Eve or morning of and it arrived today, maybe it was Monday I forget, either way from New Jersey to California in a few days is fine with me
EDIT:
Sent from my iPhone using Tapatalk
Last edited: