Become a Patron!

The official VAPE MAIL!!!!!!! thread #2

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Is this the skin design that's on the Fuchai? @debinnv @MrMeowgi This is "Trippy 3" from Vaporskinz

Trippy_3_Vapor_Skinz_1000x1000_crop_center.jpg
I think that's it but let me go look through my purchase history and make sure , brb

EDIT: Yep, that be the one!
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
you didn't ask me, but i'l put my $.02 in anyway. :D

i like the Ram, its at least as good as the Armagedon, perhaps better. and my magnet comes out now&then also.

I know it's probably not a widely-held opinion, but I think the Ram is better than the Armageddon. And much less finicky.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
The only thing I find finicky about the armageddon is the adjustable 510. They are very similar in size and given the same RDA, coil, and battery they hit about the same.

Although I don't think mine has a problem to the extent that @Jinx'd did, I think if your experience is that they hit about the same, then my Armageddon must have a little bit of a problem. I can take the same RDA and battery and use them on the two different devices, and the Ram hits harder. There isn't a huge difference, but the difference is enough to observe.

The 510 is really what I meant about finicky. I switch things around a lot, and that 510 gets me every time.
 

Jinx'd

Platinum Contributor
Member For 2 Years
for me, what is fucked up about the Arma is the contacts. i have had all 3 Arma's go completely dead because of the contacts.
i've quit using them, not because of that, but because of new acquisitions.
 

DonBaldy

Platinum Contributor
Member For 4 Years
My Armas vape fine. No issues at all.

Although I don't think mine has a problem to the extent that @Jinx'd did, I think if your experience is that they hit about the same, then my Armageddon must have a little bit of a problem. I can take the same RDA and battery and use them on the two different devices, and the Ram hits harder. There isn't a huge difference, but the difference is enough to observe.

The 510 is really what I meant about finicky. I switch things around a lot, and that 510 gets me every time.

It could still be any number of issues causing the variances. Cleanliness of contacts. Cleanliness of battery contacts. Cleanliness of 510 confection. Probably many other things of which I'm not thinking.. .
 

dubya314

Platinum Contributor
Member For 5 Years
for me, what is fucked up about the Arma is the contacts. i have had all 3 Arma's go completely dead because of the contacts.
i've quit using them, not because of that, but because of new acquisitions.
We could probably work out a trade :cool: I love the adjustable 510 on the Arma. Can't stand proprietary ones. I gotta have a flush atty :facepalm:
 

Jinx'd

Platinum Contributor
Member For 2 Years
We could probably work out a trade :cool:

I love the adjustable 510 on the Arma. Can't stand proprietary ones. I gotta have a flush atty :facepalm:


thanx for the offer, but, i really do like the Arma's regaurdless. and you may find this odd, but i am keeping everything i have. believ it or not, it all is sentimental to me. at least for now.

i like the adjustable 510 also.
 

dubya314

Platinum Contributor
Member For 5 Years
thanx for the offer, but, i really do like the Arma's regaurdless. and you may find this odd, but i am keeping everything i have. believ it or not, it all is sentimental to me. at least for now.

i like the adjustable 510 also.
I totally get it. It's been hard for me to sell, even stuff I know I will never use. But with my eyes on another BB or two, I got no choice :facepalm:
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Received a Yosta Livepor 256W mod and a beautiful ruby-colored drip tip today from @bx10r

Put my new Smok Resa Prince on the mod for now, charging batteries for it, and put the drip tip on a black Zeus X that's sitting on my Aegis Legend. Looks all spiff now! Need a silicone case for the Legend, though; it has been through the mill a bit.

Thanks @bx10r for super-quick turnaround and two very nice items in vape mail!
 

gsmit1

Platinum Contributor
Member For 4 Years
I didn't

Sent from a Galaxy far far away
I got three. I wish I would have gotten more while I had the chance. Stiff throw, but I cooked the stock one in my 3:1 in stacked mode. :wait: I mean it heated up and got real soft. Not up to a series stack that low. The Lee flat spring is stiffer like I say, but no problems in high power situations.

I was just wondering and wanted to know what you thought of them if you had. Pretty meaty.

They also fit my Panzers, but I put the stock springs I had left in them. Single 18650.
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
for me, what is fucked up about the Arma is the contacts. i have had all 3 Arma's go completely dead because of the contacts.
i've quit using them, not because of that, but because of new acquisitions.
well,not gonna like that post. I'm sorry :( that bites
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Got some purple rings for the Vert MDX today. I don't know guys, I'm sad. The button on this mod, I am really struggling with. I may have to sell it. I have 4 sets of rings now too :( They had said they were going to locate me a V1 switch but of course that never happened. I am sure they were just trying to stall or appease me so I wouldn't do a charge back. By all rights I could have seeing as they did not send me what was pictured on their website, but screw it.. I was just saying to someone that out of the years I have been buying stuff I have always had pretty good luck. This of course was the worst but I can't complain too much I guess.

On a happy happy note though, That uwell soulkeeper and the purge enforce are easy as can be for me :)

IMG_20200208_101626843.jpg
 
Last edited:

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Got some purple rings for the Vert MDX today. I don't know guys, I'm sad. The button on this mod, I am really struggling with. I may have to sell it. I have 4 sets of rings now too :( They had said they were going to locate me a V1 switch but of course that never happened. I am sure they were just trying to stall or appease me so I wouldn't do a charge back. By all rights I could have seeing as they did not send me what was pictured on their website, but fuck it.. I was just saying to someone that out of the years I have been buying stuff I have always had pretty good luck. This of course was the worst but I can't complain too much I guess.

On a happy happy note though, That uwell soulkeeper and the purge enforce are easy as can be for me :)

View attachment 154823
Gahhhhh that's beautiful. That purple and black is awesome. I hate you had such a hard time with that one. At least it f'n looks great. :banana:
 

Jinx'd

Platinum Contributor
Member For 2 Years
Got some purple rings for the Vert MDX today. I don't know guys, I'm sad. The button on this mod, I am really struggling with. I may have to sell it. I have 4 sets of rings now too :( They had said they were going to locate me a V1 switch but of course that never happened. I am sure they were just trying to stall or appease me so I wouldn't do a charge back. By all rights I could have seeing as they did not send me what was pictured on their website, but fuck it.. I was just saying to someone that out of the years I have been buying stuff I have always had pretty good luck. This of course was the worst but I can't complain too much I guess.

On a happy happy note though, That uwell soulkeeper and the purge enforce are easy as can be for me :)

View attachment 154823

that is so "you" :). sorry your having troubles with it :(
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
that is so "you" :). sorry your having troubles with it :(
Well, I'm not ready to list it yet. I am going to try to make a copper spring for it. But last time I tried my hands are no longer strong enough to wrap it around a screwdriver, but I will give it a try again. Thanks @MrMeowgi Ya, it looks great but not much use to me if I'm constantly having to struggle with the thing :) Well, as I said not ready to call it quits quite yet. If anything, I'm a stubborn bitch
 

Jinx'd

Platinum Contributor
Member For 2 Years
Well, I'm not ready to list it yet. I am going to try to make a copper spring for it. But last time I tried my hands are no longer strong enough to wrap it around a screwdriver, but I will give it a try again. Thanks @MrMeowgi Ya, it looks great but not much use to me if I'm constantly having to struggle with the thing :) Well, as I said not ready to call it quits quite yet. If anything, I'm a stubborn bitch

a copper spring, ay. never heardd of such a thing. what copper do you use ?
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Well, I'm not ready to list it yet. I am going to try to make a copper spring for it. But last time I tried my hands are no longer strong enough to wrap it around a screwdriver, but I will give it a try again. Thanks @MrMeowgi Ya, it looks great but not much use to me if I'm constantly having to struggle with the thing :) Well, as I said not ready to call it quits quite yet. If anything, I'm a stubborn bitch

I'm probably about to say something dumb, but here goes. I assume the spring is for the firing switch, correct? If so, can the tube not use magnets?
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I'm probably about to say something dumb, but here goes. I assume the spring is for the firing switch, correct? If so, can the tube not use magnets?
If I could get to the inner part like you can on the V1 then yes, I could use magnets. But being that they welded shut the top part of the switch on the V2, I can't :( and it's not dumb thing to say at all :) if they hadn't made that switch unserviceable ( is that even a word? ) Then yes, you could use magnets.
 

Synphul

Gold Contributor
Member For 4 Years
Got some purple rings for the Vert MDX today. I don't know guys, I'm sad. The button on this mod, I am really struggling with. I may have to sell it. I have 4 sets of rings now too :( They had said they were going to locate me a V1 switch but of course that never happened. I am sure they were just trying to stall or appease me so I wouldn't do a charge back. By all rights I could have seeing as they did not send me what was pictured on their website, but fuck it.. I was just saying to someone that out of the years I have been buying stuff I have always had pretty good luck. This of course was the worst but I can't complain too much I guess.

On a happy happy note though, That uwell soulkeeper and the purge enforce are easy as can be for me :)

View attachment 154823
I'm not usually a huge fan of bold colors like purple, but damn. That just looks great, clean and tight. Really pops.
 

VU Sponsors

Top