Become a Patron!
The official VAPE MAIL!!!!!!! thread #2
- Thread starter Countrypami
- Start date
-
- Tags
- vape mail
The "MTL" version arrived last week. It is not really MTL, more in realm of RDL to DTL which is fine for me. I cant measure the diameter of the inlet hole but visually this model has a bit smaller hole but not by much. The nice thing is that this model comes with two standard 510 drip tips that are interchangeable. The "DTL" has a static drip tip and therefore cannot be replaced. The base size is the same and are interchangeable for color mixing. The "DTL" comes with .15 and .30 PNP X coils and the "MTL" comes with .30 and the .60 PNP X coils respectfully.
If you are considering between the two models, I would recommend getting the "MTL" model just because you can change out the drip tips and a slightly tighter draw.
Attachments
Good lawd, topside for life
Officially retired from Topside hunting...Good lawd, topside for life
Unlikely!
You only have enough gear to last until you're 120yo... You might want to keep looking!
Last edited:
Lmao....you are about as retired from topsides as dubya is from 18650 mech squonks....or gadget and or myself retiring from purge. Lol
Gear junkie for life....
Lmao....not a clue brother. And i wont say wether this pic is of all of mine or just 1 book case. LolWho me?
Sent from my SM-S918U using Tapatalk
You have pleanty of room to keep buying then. LolThanks for the pictures. Now I feel even better about having 18 Topsides,
Retired...17 backups is enough, lol. Probably take a couple factory sealed to the grave for the after vape....
CrazyChef v2.0
Platinum Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I haven't bought any NEW stuff for quite a while. But I came across one of my old series mechs that I wanted to use again. But I didn't want to give up the flavor of the Steam Crave Aromamizer Plus V2 RDTA that I've been using for my ADV for like the past 4 or 5 years. I have an extra that I've never even used yet. So what's a boy to do? I ordered the series deck for it! Why did it have to get here right before I have to go to work?!?!?
|P|U|R|G|E|M|O|D|S|
CrazyChef v2.0
Platinum Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
That is a HOT setup!!!Purge Mods Fallout
|P|U|R|G|E|M|O|D|S|
Copper
Sent from my SM-S918U using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
What's the business end?Great little mod, probably one of the smallest 21700 regulated mods out there.
Sent from my SM-S918U using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I remember that design nowAn oldie but goodie
Sent from my SM-S918U using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
yep, cir 2018ishSingle coil banger.
Sent from my SM-S918U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I haven't bought anything new for a VERY long time. I did order this last night though. I want to see if all the hype is true 
https://www.sourcemore.com/voopoo-argus-g2-kit.html
The Aurora Purple one of course!
Also this to go with it when I have my morning tea
https://www.sourcemore.com/voopoo-argus-g2-kit.html The Aurora Purple one of course!
Also this to go with it when I have my morning tea
here in australia we dont have that choice, we cant buy them! or juice, or coils grrrI haven't bought anything new for a VERY long time. I did order this last night though. I want to see if all the hype is true
The Aurora Purple one of course!
View attachment 218676
Also this to go with it when I have my morning tea
View attachment 218675
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Hooray! Vape mail. I haven't bought anything vape wise in a long time. The Asvape Michael Mod. The Modfather RTA. The Sherman RDA and finally the Vortice RDA (what a little flavor banger this guy is) He even threw in a couple of atty stands (can never have too many of these)
Last edited:
Dang! Didn't know they made one in .999 silver. What's it weigh?
I have no idea and I've traded it so I can't weigh it.
But like all the Slam Pieces, they have some weight to them.
Sent from my SM-S918U using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
AsModus has 30% off + free ship @ 49.99. My Nano X that I like is eol w/pods hard to find or not cost effective for the age of the device, so went with this. Hoping I like the .3 coils at low wattage since the X was running .5. something tells me I should have got .8 instead and vaped it as RDL.
I've grown to like having a pod in the kitchen in case I don't carry a real :0 vape in there, and it's close to the back door if I go somewhere.
Anyone else have one of these?
I've grown to like having a pod in the kitchen in case I don't carry a real :0 vape in there, and it's close to the back door if I go somewhere.
Anyone else have one of these?
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Not bad. Considering adult sig ship would have been $15.
Free Blank Bar +
Don't care for the tip. Think I'll make one from two 810's.
275 puffs(a little more than 1 fill) on 1 full charge using .3Ω @ 22-23W. 45 mins from dead to full.
Free Blank Bar +
Don't care for the tip. Think I'll make one from two 810's.
275 puffs(a little more than 1 fill) on 1 full charge using .3Ω @ 22-23W. 45 mins from dead to full.
CrazyChef v2.0
Platinum Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I'd like to give a big shout out to Roundhouse and wllmc over at BCF! Ordered some flavors on their Black Friday sale, and they're already here ready to be mixed - and they threw in a free sample of CAP Peach as well!
I see a peach custard trial run in my near future...
Thanks again BCF!
I see a peach custard trial run in my near future...
Thanks again BCF!
Super conductor on that?The Detonator with XRDA
Sent from my SM-S918U using Tapatalk
I think you have a heard of unicorns by now. Lol
CrazyChef v2.0
Platinum Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Another fine delivery from @wllmc over at BCF. Honestly, I don't even shop around for pricing anymore - BCF is my #1 "go-to" shop for flavors. The 15% off Christmas sale helped too but I still would have shopped there nonetheless. These are for my 4 ADVs. One of which I haven't made in quite a while. I'll be whipping up a batch of Nilla Cake clone. The recipe was derived from a collaborative of fine folks here at VU in the thread Nilla Cake Clone Collaborative.
but I still would have shopped there nonetheless. These are for my 4 ADVs. One of which I haven't made in quite a while. I'll be whipping up a batch of Nilla Cake clone. The recipe was derived from a collaborative of fine folks here at VU in the thread Nilla Cake Clone Collaborative. 
CrazyChef v2.0
Platinum Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
My favorite RDTA (aside from the Scottua). Been using these almost exclusively for the past 5+ years. And Cotton Bacon Prime is completely flavorless and needs ZERO break in time.
I received an Aspire Kumo RDTA today that I purchased from the classifieds on another vaping forum today.
I built a 3MM ID parallel twisted 26G SS316L 6 wrap coil, coming out at 0.28 Ohms. 38 Watts seems to be the sweet spot with this setup, lots of warm vapour and plenty of flavour with a slightly restricted DTL hit.
I needed another black RTA as most of mine in the collection are Stainless Steel, paired it with my Cuboid running Arctic fox today, 240C seems a nice temperature.
I built a 3MM ID parallel twisted 26G SS316L 6 wrap coil, coming out at 0.28 Ohms. 38 Watts seems to be the sweet spot with this setup, lots of warm vapour and plenty of flavour with a slightly restricted DTL hit.
I needed another black RTA as most of mine in the collection are Stainless Steel, paired it with my Cuboid running Arctic fox today, 240C seems a nice temperature.
Attachments
Last edited:
I only hade a small delivery today but something I needed, 20 sheets of Muji cotton for wicking as I was running out.
I was short by about 30 pence to get the 180 sheets from Muji for £2.95, with shipping it is about £7 so ended up paying £3.99 for 20 sheets, that will be enough to get me through until I next get payed and can buy the 180 sheets direct from Muji, as it is a massive saving buying directly from them vs vape shops that resell them in smaller amounts for a large markup fee.
I was short by about 30 pence to get the 180 sheets from Muji for £2.95, with shipping it is about £7 so ended up paying £3.99 for 20 sheets, that will be enough to get me through until I next get payed and can buy the 180 sheets direct from Muji, as it is a massive saving buying directly from them vs vape shops that resell them in smaller amounts for a large markup fee.
Last edited:
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Gorgeous Vape Mail yesterday. I adore this Purge.
From VaporDna. Haven’t had vape mail in a long while. On sale for $59.99 not bad shipping @ $7.99 no ridiculous $12 charge for Adult Signature on top of Priority Mail shipping only.
Loving the colour, I would have that for myself and I am a bloke. I have heard good things about the Pulse V2 AIO, including its included RBA, and was advised it is a great place to start if I want to try a Boro style device, as out of my 52 mods not one of them is AIO/Boro.
How have you found building with the included RBA section, is it hard/easy, how does it perform etc?