Become a Patron!

The official VAPE MAIL!!!!!!! thread

Status
Not open for further replies.

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Now you know why I recommend around 0.6 ;)
Just switched it up to a 10 wrap 3.5 mm I'd twisted fused clapton ss316l build. Ohm at .61 and it's a much smoother vape. I can actually take a big pull now. Getting good flavor too but I still prefer the azeroth as of now for rdta under 30mm. Combo is nice though

Sent from my SM-G935V using Tapatalk
 

Vesuvius

OG
VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
Next time you wick, try cutting your wick shorter. The wick doesn't need to touch the bottom of the tank. In your picture I can see the wick above the wick holes are nice and wet. Below they look dry. The wick holes create a choke point in the wicks. So wick 1 or 2 mm below the wick holes. That should be enough.
Its working great now! The first time, I made the wicks long enough to touch the bottom and this time I didn't. Seems to be the only difference in why it leaked and why it did not.

Oh, and they look wet like that because I had just wicked it and I put some juice on the coils before I put it back together.

I really like it now. Other than those piece of shit grub screws.
 

Vesuvius

OG
VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
Three tank fulls on the Troll so far and not one single drop of anything leaking. This thing has definitely replaced my other tank. Thing is awesome. The only issue is, it destroys juice and fast. I burn through a tank in no time.
 

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
c5689be4e37bec5a0232602c5e4c5e62.jpg
Ooo nice! I likey!
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
You are a sick man Anthony! LOL.
But that is some seriously dense cloud. I thought you were a flavor chaser?
I am lol that's why I scaled back the build after I made that video. That was a.42 ohm build. I added some wraps to get to .61 ohms. Much smoother hit and better flavor. I'm suprised how hard the vcp hits. I didn't expect it to be this good

Sent from my SM-G935V using Tapatalk
 

Vesuvius

OG
VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
I am lol that's why I scaled back the build after I made that video. That was a.42 ohm build. I added some wraps to get to .61 ohms. Much smoother hit and better flavor. I'm suprised how hard the vcp hits. I didn't expect it to be this good

Sent from my SM-G935V using Tapatalk
Pfft, Flavorchaser, Tootlepuffer, you need a itty bitty "sqwonker" :teehee:
 

Johnnytraveler

Gold Contributor
Member For 3 Years
Member For 2 Years
I am lol that's why I scaled back the build after I made that video. That was a.42 ohm build. I added some wraps to get to .61 ohms. Much smoother hit and better flavor. I'm suprised how hard the vcp hits. I didn't expect it to be this good

Sent from my SM-G935V using Tapatalk
I always struggle with the idea of adding wraps. I figure it would increase the ramp up time. But I'm no expert. What's your guys take?

Sent from somewhere in Vietnam.
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I always struggle with the idea of adding wraps. I figure it would increase the ramp up time. But I'm no expert. What's your guys take?

Sent from somewhere in Vietnam.
Depends on the wire and build. My .41 build from the video was like 171 watts. Too much for my build to vape the way I like. Adding wraps toned it down to about 116 watts. Much more in my range I like and still ramps up instantly but not overbearing like the video build was. It's really a a balance of mass and power that decides ramp up. My first build was less mass and more power but the ramp was insane. Just instant lung full of vapor and needed a hard pull. So slowing it down a bit was fine to me

Sent from my SM-G935V using Tapatalk
 

Erbz

Member For 3 Years
Member For 2 Years
Member For 1 Year
Yesterday I received this (yes I now some is past and some are close to the bb date but to me it was still a bargain for flavor experiments at £15 (uk))
 

Attachments

  • 2017-02-12 00.51.57.jpg
    2017-02-12 00.51.57.jpg
    101.4 KB · Views: 25

Vesuvius

OG
VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
I would just take my old Rx200, use the internals and make a tripple 18650 wood sqwonker. It would be pretty fucking big but, would have the power lol
 

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
My first vaporizer was a Kangertech Subvod-C and while it doesn't have much flavor it's what got me off analogs in the first place so I appreciate it for that. I bought a Kanger Toptank mini not long ago and while the flavor is just "okay" with the factory coils, with the RBA the flavor is fantastic.
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
My first vaporizer was a Kangertech Subvod-C and while it doesn't have much flavor it's what got me off analogs in the first place so I appreciate it for that. I bought a Kanger Toptank mini not long ago and while the flavor is just "okay" with the factory coils, with the RBA the flavor is fantastic.
They are fine for starter devices and helping people quit. My 1st one to get me off dipping was an ego c twist battery with a kanger evod tank. It's just something most people upgrade eventually.

Sent from my SM-G935V using Tapatalk
 

HvyMtl

Gold Contributor
Member For 4 Years
Member For 3 Years
Three tank fulls on the Troll so far and not one single drop of anything leaking. This thing has definitely replaced my other tank. Thing is awesome. The only issue is, it destroys juice and fast. I burn through a tank in no time.

I haven't had any issues with the screws and the flavor in this thing is incredible. No leaking at all since yes, it is how you position your cotton. My concern is the stuff I'd heard about the peek melting. But for me, so far, so good. It does go through juice fast like you said.


Sent from my iPad using Tapatalk
 

Vesuvius

OG
VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
Has anyone that received a Troll RTA checked the scratch code through Wotofo? I ordered and received mine from Subtank Supply, and my code is showing this on Wotofo's authenticity check "Code Doesn't Exist, Please Watch For Fakes"
 
Status
Not open for further replies.

VU Sponsors

Top