Become a Patron!

The official VAPE MAIL!!!!!!! thread

Status
Not open for further replies.
Theboss

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
dom qp said:
Don't get your hopes down! Mine was showing 10 April until it was out for delivery.

Mine arrived in Kitchener after yours. Might still be in sorting at the local depot.

View attachment 135606
Click to expand...
Yeah, it'll be tomorrow. I know the Williamsburg post office very well by now. If they don't have the package out for delivery by 8am it's not coming that day. It seems like the lady doesn't go back until her day is done.

Oh well, it's one more day. Very interested in hearing your thoughts today.

Gives me another day to try another build in my Sherman 28mm, still haven't found the sweet spot yet.

20190405_094047.jpg
 
D

dom qp

Member For 2 Years
Member For 1 Year
Theboss said:
Yeah, it'll be tomorrow. I know the Williamsburg post office very well by now. If they don't have the package out for delivery by 8am it's not coming that day. It seems like the lady doesn't go back until her day is done.

Oh well, it's one more day. Very interested in hearing your thoughts today.

Gives me another day to try another build in my Sherman 28mm, still haven't found the sweet spot yet.

View attachment 135608
Click to expand...

That's weird. I'm a couple hundred metres from Sunrise so I think mine come off of Williamsburg too. Or at least, when I have to pick up a package it's at Williamsburg.
 
Theboss

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
20190409_093923.jpg
dom qp said:
That's weird. I'm a couple hundred metres from Sunrise so I think mine come off of Williamsburg too. Or at least, when I have to pick up a package it's at Williamsburg.
Click to expand...
Well that's a first, doesn't even say out for delivery yet, lol.

20190409_093636.jpg
Bought 3 batteries and really like the chubby gorilla case he sends them in, this is my 3rd from him. Weird he doesn't have them on his site.
 
Theboss

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
Initial thoughts on the Fatality M25.

Very easy to build and wick, first build and zero leaking.

I had prebuilt 2.5mm id 5 wrap (spaced) fused claptons and put them in. At 2.5mm id I can get the coils nice and low, they're as close as they can be without touching and I feel like the bottom and side air flow is hitting the coil perfectly. The bigger id you use in here, the higher you'll have to set the coils which shouldn't be much of an issue, but I'd remove the ultem bottom airflow insert on anything over 3mm.

The white TBD insert was the first thing to go out of the box, I'm not a fan of bubble glass, but I can see myself installing it because of the amount of airflow this can definitely be a juice pig. Talking about airflow, wide open is smooth and provides good flavor, I prefer both airflow rings at about 3/4 open, no whistle and even better flavor. With the airflow at half way the flavor really shines the best with the build that I'm currently using, but is slightly restricted af for my taste. All of this is subjective obviously and will depend on your build.

So far I'm impressed, QP is known for their RTA'S and it seem like this one continues that winning tradition.

Waiting to hear @dom qp thoughts
 
Last edited:
D

dom qp

Member For 2 Years
Member For 1 Year
Theboss said:
Initial thoughts on the Fatality M25.

Very easy to build and wick, first build and zero leaking.

I had prebuilt 2.5mm id 5 wrap fused claptons and put them in. At 2.5mm id I can get the coils nice and low, they're as close as they can be without touching and I feel like the bottom and side air flow is hitting the coil perfectly. The bigger id you use in here, the higher you'll have to set the coils which shouldn't be much of an issue, but I'd remove the ultem bottom airflow insert and anything over 3mm.

The white TBD insert was the first thing to go out of the box, I'm not a fan of bubble glass, but I can see myself installing it because of the amount of airflow this can definitely be a juice pig. Talking about airflow, wide open is smooth and provides good flavor, I prefer both airflow rings at about 3/4 open, no whistle and even better flavor. At halfway I think the airflow shines the best for the build that I'm currently using, would use more airflow with bigger coils installed.

So far I'm impressed, QP is known for their RTA'S and it seem like this one continues that winning tradition.

Waiting to hear @dom qp thoughts
Click to expand...

I love it. My favourite tank so far. But i've filled the bubble glass to full 3 times in the last 3 hours or so - she definitely guzzles.

My negatives though:

- I hate how the qpdesign logo is so low on the chimney. When you put the bubble glass on the design is under the curve of the glass, so it's distorted and looks weird. They should have put it just a couple millimeters higher.

- The juice flow control is completely closed off when spun all the way to the right or the left - fully open when perfectly centered. I don't understand why they didn't just do it like on everything else: fully to one side is fully open, other side fully closed. I like to be able to adjust these things without having to look at the positioning of the logo relative to my mod.

- The topfill cap if spun all the way to the left doesn't always let you pull it out. On mine I have to spin it to the left and then twist to the right 1-2mm for it to come off.

- My threadings were a bit nicked and ugly. Not a big deal but i'd have expected them to check for those things.

The rings and adjustments are all butter smooth after dripping eliquid on of them. The flavour is the best i've had in a tank. I've chained vaped 3 tanks worth of eliquid in less than 4 hours and not a single dry hit (if anything, I need to turn the juice flow down a bit to avoid oversaturation).

I wicked, coiled, and positioned the same way I do on the kali. dual 3mm id 28g*3/36g @ 6 wraps -- had to use fully open airflow but it's perfection (flavour & performance) in a tank for me.

Nit picking here, but I wish they would make a slam deck -- just one unadjustable airflow with a single slit to save on height. She's pretty tall.
 
MrMeowgi

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Theboss said:
Whatcha getting?
Click to expand...
An ipv V-IT.
3de65b27f5a5367b03660355c43e2def.jpg
 
nadalama

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
benley73 said:
Just a bit of concentrate, Order from 2 different companies, time i got Alphabetically Organisation in my vape cupboards i think ,

Dark Arts is one shops Rebrand FA,
7ea96d3cecd65536d4f6fcc09caf16ad.jpg
0d66a8edfea28868041dec6683b8b11c.jpg


Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...

Yup, time to get a shelf and get situated. You'll drive yourself nuts otherwise. :)
 
ben73

ben73

Gold Contributor
Member For 4 Years
nadalama said:
Yup, time to get a shelf and get situated. You'll drive yourself nuts otherwise. :)
Click to expand...
Done most of it now,
Wall unit 1000mm 720 mm,
3 shelfs holding my 30ml 100ml and 250mls,
And a full bottom unit filled with 1Ltr and 5ltr bottles,
Now just need another for mixed juices since i just totted up got way to many liters of flavours need to down size some lol, been brexit stock piling.
,
d71360ae1f083f6060b6f0a7f80f39f9.jpg
5bc4bd03b8b10f63a5086c6f3fcd2ab0.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 
bx10r

bx10r

Platinum Contributor
Member For 4 Years
Theboss said:
Interesting, must not be in Canada yet, these aren't iced. The Void and Sol are my favorite from them. I also like their Bavarian cream
Click to expand...
The desserts/custards/cereal arent here yet. Were in reverse maybe. My coil teacher is sponsored by them...i got so much of it when they came out...i gave it away. Cough cough

Sent from my SM-G950U using Tapatalk
 
Theboss

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
bx10r said:
The desserts/custards/cereal arent here yet. Were in reverse maybe. My coil teacher is sponsored by them...i got so much of it when they came out...i gave it away. Cough cough

Sent from my SM-G950U using Tapatalk
Click to expand...
Lol
The only reason I buy from Warped is that it's $7.50 ($5.60 US) per 60ml and I go through a ridiculous amount of juice.
An added bonus is that my cotton and coils aren't gunked up after a few days.

Off topic, how was the corn bread juice you received yesterday?
 
ben73

ben73

Gold Contributor
Member For 4 Years
Dont remember if posted already but I did manage
To get a Dvarw MTL 22mm,
Series 9 , (014 serial) number,

Still awaiting Colbri v6 mod, 2 wks bouncing around Russian federation custom's , 9 different ones now ,
its like china post but 4 time the price of china postal charges,
3e35745674209bc14e70f4f4b35cdee0.jpg
4f299009522a53959424fefe5480f722.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 
bx10r

bx10r

Platinum Contributor
Member For 4 Years
Theboss said:
Lol
The only reason I buy from Warped is that it's $7.50 ($5.60 US) per 60ml and I go through a ridiculous amount of juice.
An added bonus is that my cotton and coils aren't gunked up after a few days.

Off topic, how was the corn bread juice you received yesterday?
Click to expand...
Very good.. only dripped it last night.

Sent from my SM-G950U using Tapatalk
 
nadalama

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
debinnv said:
Couple of goodies today from Mr. @gadget! Luxotic squonk and some magnets for my AV!

View attachment 135698
Click to expand...

Nice, Deb! Interested to hear how you like that Luxotic. I have a BF and have had two NCs (not squonkers), and like them a lot. Think the one you have there is a relatively new model.

Here's my vape mail for today (just the RTA - I've had the mod for a while). Intake RTA on a Voopoo VMate. Put a 1.1 ohm SS Clapton in there, vaping some new DIY juice using temp control, very nice!

Intake.jpg
 
Status
Not open for further replies.

VU Sponsors

Top