DeepInTheAbyss
Member For 1 Year
So... 3fvapes.com. Supposedly known for great clones. Just got cloned driptech ts.. A triple battery squonk mechanical mod. 25$. 100$ for authentic. Is this going to blow my face off.
So... 3fvapes.com. Supposedly known for great clones. Just got cloned driptech ts.. A triple battery squonk mechanical mod. 25$. 100$ for authentic. Is this going to blow my face off.
Ive been vaping for years. I know everything about ohms low and the cost of asking too much from batteries. I have great batteries, ready to slide into that clone. My question is, does cutting the price by 3/4, mean the quality is cut by that much too? Its a triple 18650 squonk mech mod. Will the squonk bottle even be attached correctly? xD Or will it leak out into the batteries and short them? I already bought it, I just wanna know if good clones are reliable or not.
My clone ds is decent but started getting the clone button issues so I packed it away. Just don't trust it anymoreI'd do a quick DripTech here on VU, when the clones were first released, some were definitely better built than others
With triple 30 amp 3000 mah batteries I'm pretty confident I can put whatever I want on there above .1 ohms and it won't matter. I just want peoples opinions on whether this thing is going to be bad or not. Incorrect structure of a clone can cause battery malfunctions regardless of how much you know.
So... 3fvapes.com. Supposedly known for great clones. Just got cloned driptech ts.. A triple battery squonk mechanical mod. 25$. 100$ for authentic. Is this going to blow my face off.
Smart thinking AndriaThere's no such critter as 30amp 3000 mAh batteries. The higher the amps, the lower the mAh -- usually 30 amp batteries are about 1000-1500 mAh. You need to check those by Mooch's list. My own 3000 mAh batteries, Samsung 30Q's, are 15amp.
Andria
With triple 30 amp 3000 mah batteries I'm pretty confident I can put whatever I want on there above .1 ohms and it won't matter. I just want peoples opinions on whether this thing is going to be bad or not. Incorrect structure of a clone can cause battery malfunctions regardless of how much you know.
Smart thinking Andria
Sent from my Nexus 6P using Tapatalk
My mistake, 20 amp. Either way 3 20 amps can handle .1-.15 claptons without any malfunctions. I just wanted to get others opinions. Do you think theres a chance that ill get a good one and all batteries will connect for however long I have it? What could cause the pin to melt? Ive autofired once before with a zephyr buddha clone I know how to handle it. I just want it to work, hit hard, and handle my builds while I can squonk my rdas. A single battery would vent on my preferences, duals would be pushing it. I was going to get a authentic vv pulse but it just wouldnt cut it. And I don't have the money for an authentic driptech ts right now. All the triple battery squonkers are over 100, no idea why.
People put .15 ohms on single tubes all the time.im not really a fan of it in my builds but I know my batteries won't hold for that build. Why not just get top of the line batteries and use a single or dual battery squonk? Just a thought but I understand where you're coming from too.My mistake, 20 amp. Either way 3 20 amps can handle .1-.15 claptons without any malfunctions. I just wanted to get others opinions. Do you think theres a chance that ill get a good one and all batteries will connect for however long I have it? What could cause the pin to melt? Ive autofired once before with a zephyr buddha clone I know how to handle it. I just want it to work, hit hard, and handle my builds while I can squonk my rdas. A single battery would vent on my preferences, duals would be pushing it. I was going to get a authentic vv pulse but it just wouldnt cut it. And I don't have the money for an authentic driptech ts right now. All the triple battery squonkers are over 100, no idea why.
My mistake, 20 amp. Either way 3 20 amps can handle .1-.15 claptons without any malfunctions. I just wanted to get others opinions. Do you think theres a chance that ill get a good one and all batteries will connect for however long I have it? What could cause the pin to melt? Ive autofired once before with a zephyr buddha clone I know how to handle it. I just want it to work, hit hard, and handle my builds while I can squonk my rdas. A single battery would vent on my preferences, duals would be pushing it. I was going to get a authentic vv pulse but it just wouldnt cut it. And I don't have the money for an authentic driptech ts right now. All the triple battery squonkers are over 100, no idea why.
Is poorer a word? SorryThe flawed design and materials used make the clone TS hit like a small pillow
Edit: the design, or manufacturing flaw, is when you tighten the negative contact screws on the bottom of the TS, it pushes the battery plate away from the body (there is too much space between the grooves) which, being made of aluminum and already having poor conductivity, causes the connection to be even poorer and make what should be 3.5 volts feel more like 2.8
Is poorer a word? Sorry
Sent from my Nexus 6P using Tapatalk
Hell yeah. LolI meant poorerest, it's the badderest mod
I dunno man I just wanna replace my realeuax gen 3 as my daily go to. Squonk is just a convenience, and I dont mind mechs because I know theyll pull 120+ watts from my builds. Maybe even 150-200. I was gonna get a rx300, quad battery, because my builds already tear through 3 batteries in 4-6 hours. I recharge each set once a day. What I make generally pulls 4.6 volts and 150 watts, which is my preferred sweet spot. Anything less than 100 and they barely fire. Big clouds big flavor, that's what I like. 4.6 goes down 4, big whoop. I just want it to last and not blow up. And work. Thats all. If you take a look at my posts you'll see me whining about this trash flavor I'm getting. I dont know where its coming from or why but I think it could my mod actually, not sure, originally I thought it was my rda but now my other rda is acting up too. Maybe cotton. I just wanna replace and improve. I also ordered a vandy vape bonza rda.. I also thought about replacing my lg hg2 batteries with samsung or sonies best batteries.
I meant poorerest, it's the badderest mod
1 more question. Only 1 single thing I'm concerned about. I researched it, based off if what y'all said. The button. Not delrin. Authentic is delrin. Clone is cheap plastic. I read that if you stay at .12 or above nothing should happen. Do y'all think this is true, and if so, or even if not, do you think itd be smart to hover around .2 instead? Like a little under or below? Apparently everything is good but the button. Voltage sag can happen but no much. Some arcing too. I read you can get a authentic replacement button for it from the real manufacturer and it'll fix any of the button issues.
I dunno man I just wanna replace my realeuax gen 3 as my daily go to. Squonk is just a convenience, and I dont mind mechs because I know theyll pull 120+ watts from my builds. Maybe even 150-200. I was gonna get a rx300, quad battery, because my builds already tear through 3 batteries in 4-6 hours. I recharge each set once a day. What I make generally pulls 4.6 volts and 150 watts, which is my preferred sweet spot. Anything less than 100 and they barely fire. Big clouds big flavor, that's what I like. 4.6 goes down 4, big whoop. I just want it to last and not blow up. And work. Thats all. If you take a look at my posts you'll see me whining about this trash flavor I'm getting. I dont know where its coming from or why but I think it could my mod actually, not sure, originally I thought it was my rda but now my other rda is acting up too. Maybe cotton. I just wanna replace and improve. I also ordered a vandy vape bonza rda.. I also thought about replacing my lg hg2 batteries with samsung or sonies best batteries.
You've been watching too many Little Caesar commercials.
Andria
No TV just vape videos.A mech will disappoint you if you like 4.6 volt vapes. Estimate the voltage drop with full batteries to maybe be 3.5 volts and go down fast from there.
I don't watch TV, so that reference went over my head commercials are de debil!
No TV just vape videos.
Sent from my Nexus 6P using Tapatalk
I remember the days of Nick Jr all day. Dora and Ruby and Max. Lol now they're old enough to like Pokemon and video games.Haha, and even those are rare except, I was expecting to get a decent mod with potential button problems, was really bummed that it had wimpy conductivity I mostly watch kid movies and nursery rhyme songs
@AndriaD - it's not complex:
- SERIES muliplies N cell voltage; amperage as ONE CELL; P= (1*4.2)*30a = 60w
- 2 cells? 8.4v needs 30amp? 30a each! P= (2*4.2)*30a= 252w
- 3 cells? 12.6v needs 30amp? 30aeach; P= (3*4.2)*30a= 378w
- 4 cells? 16.8v needs 30amp? 30a each!; P=(4*4.2)*30a=504w
- PARALLEL voltage is same as ONE CELL; amperage-DRAW is now divided between N cells P=4.2*(1*30a)= 60w
- 2 cells? if you need 30a, each provides 15a; P=4.2*(2*30a)= 252w
- 3 cells? if you need 30a, each provides 10a; P=4.2*(3*30a)= 378w
- 4 cells? if you need 30a, each provides 5a; P=4.2*(4*30a)= 504w
1 more question. Only 1 single thing I'm concerned about. I researched it, based off if what y'all said. The button. Not delrin. Authentic is delrin. Clone is cheap plastic. I read that if you stay at .12 or above nothing should happen. Do y'all think this is true, and if so, or even if not, do you think itd be smart to hover around .2 instead? Like a little under or below? Apparently everything is good but the button. Voltage sag can happen but no much. Some arcing too. I read you can get a authentic replacement button for it from the real manufacturer and it'll fix any of the button issues.
You're little hands are lovely Meg .but I have small hands and that's subjective
You're little hands are lovely Meg .
Like mini me drinking from das boot.I used to drink those 32oz cans of miller high life, can you imagine how often people laughed at that?
Whoa sorry off topic, I'm leaving bye
I fixed the horrible flavor on my mod. I completely deconstructed it. There was gunk all over the firing pin inside. I cleaned it off and it tastes good again.
Mods don't have flavor, they have batteries. Attys have flavor.
Andria
Hmm how about an all in one? Think that could go either way...not that the OP has one here, just saying in general
What I think was happening was since I vape at just about super sub ohm and at 150 watts at that, it actually was causing the firing pin in the mod, right underneath the rda, to heat the gunk around and it and give it that incense taste. Because the moment I took it apart and cleaned the gunk it immediately fixed the flavor. After 5 good 3 second pulls or so my mod is warm. If I chain vape it gets hot and sometimes it even says device too hot and I set it down to cool. And funny thing, the batteries dont even get hot, its just the body of the mod.
A tense questionIs poorer a word? Sorry
Sent from my Nexus 6P using Tapatalk