Hi Vaping Underground members, In this review i take a look at the KYLIN V2 RTA from Vandyvape. The KYLIN V2 RTA was supplied for the purpose of this review by Ariel from Vandyvape.
http://vandyvape.com/atomizer/rta/atomiz...in-v2-rta/
Introduction
It seems like a long time ago since the original Kylin and what some referred to as the Kylin 2 which actually was just an updated version of the original which tried to address any issues people had found. I found the original Kylin was great with flavour and although i got the updated version which meant i didn't get major leaking issues it still from time to time would be a little leaky. So here it is the Kylin V2 with top-fill system and interesting bevelled air intake system directing the air to the deck outlets. Enough of the waffle lets give it a look!
-----------------------------------------------------------------------------------------------------
In the Box
Contents:
1 x Vandyvape Kylin V2 RTA
1 x Accessory Bag
1 x Coil Lead Guide
1 x User Manual
1 x 3ml Pyrex Glass Tube
1 x Delrin 810 Drip Tip
1 x 510 Adaptor
1 x Allen Key
2 X Triple fused clapton coils 3.0ID Ni80 0.41ohm
-----------------------------------------------------------------------------------------------------
Aesthetics
The Kylin V2 RTA came in cardboard sample packaging so will differ to the retail version. I received the Stainless Steel version, it's also available in Rainbow, Gun metal, Matte Black, Gold, Blue and Frosted Grey, all versions come with pre-installed 5ml bulge glass and Resin 810 drip tip. The Kylin V2 is quite a broad but short tank making it beefy looking, the base diameter is 24mm but it tapers out to match the 26mm top section and the bulge glass takes the diameter to 30mm. Both top and bottom of the tank as aesthetically pleasing texturing and the Resin drip tip sitting on top is quite a beauty. There is a small dot to mark where you need to push to open the top fill and the airflow control ring is dual cyclops with stopper. The air chamber that can be easily seen through the glass has "KYLINII" one side and the Vandyvape logo the other. The base see's etched branding and safety stamps and has a hybrid safe Gold plated 510. The overall quality is very good with good machining, threading and tolerances.
-----------------------------------------------------------------------------------------------------
KYLIN V2 Specs and Features:
Length: 38.15mm
Diameter: 24mm
Outside diameter: 26mm
Capacity: 3/5ml
G.W(included package): 134g
Bottom bevelled air intake & cambered surface air outlet
The Screw front press coils
Nifty slide out top filling system
Single & Dual coil support
Thread: 510
Colours: Rainbow, Stainless Steel, Gun metal, Matte Black, Gold, Blue, Frosted Grey
-----------------------------------------------------------------------------------------------------
It's Various Parts
The Kylin V2 is uncomplicated consisting of the top section which is an all in one piece comprising of the sliding top-cap, juice port and air chamber. The base section which comprises of the airflow inlets, airflow control ring and of course the deck completes the tank with the glass between the two. The glass is sealed in place via o-rings top and bottom and the air chamber screws onto the outside of the deck to securely hold the whole tank together. To remove the glass, just remove the base section then pinch one edge of the glass while pushing up inside the air chamber with your finger and it comes free with no dramas. When refitting the glass instead of fitting the pre-installed 5ml bulge glass their is the included 3ml straight glass option. The pre-installed drip tip is a very nice resin 810 (you can also fit your own), you also get a delrin 810 with sleeve giving it a lower profile and a 510 adaptor.
-----------------------------------------------------------------------------------------------------
The Airflow
The airflow control is dual cyclops with stopper which moves with very nice resistance. Below the deck is a piece inserted which is white in colour and appears to be ceramic. This piece actually acts as chambers from your airflow intakes directing the air into the bottom of the deck at an angle so when you look inside the open airflow slot instead of being able to see right through to the opposite slot you can see a White (what appears to be ceramic) wall about 3mm inside. The airflow outlets on the deck consists of 2 lines of 4 holes (8 holes in total) which will be directly underneath your coil/coils. Then we have a ramp both sides, each ramp has 3 angled slots, looking at this deck it doesn't matter whether doing a single build or dual you will get total air coverage of the coil/coils, this looks very promising. The air chamber ceiling is domed and nice and low to encourage flavour further.
-----------------------------------------------------------------------------------------------------
Review Continued Below:
http://vandyvape.com/atomizer/rta/atomiz...in-v2-rta/
Introduction
It seems like a long time ago since the original Kylin and what some referred to as the Kylin 2 which actually was just an updated version of the original which tried to address any issues people had found. I found the original Kylin was great with flavour and although i got the updated version which meant i didn't get major leaking issues it still from time to time would be a little leaky. So here it is the Kylin V2 with top-fill system and interesting bevelled air intake system directing the air to the deck outlets. Enough of the waffle lets give it a look!
-----------------------------------------------------------------------------------------------------
In the Box
Contents:
1 x Vandyvape Kylin V2 RTA
1 x Accessory Bag
1 x Coil Lead Guide
1 x User Manual
1 x 3ml Pyrex Glass Tube
1 x Delrin 810 Drip Tip
1 x 510 Adaptor
1 x Allen Key
2 X Triple fused clapton coils 3.0ID Ni80 0.41ohm
-----------------------------------------------------------------------------------------------------
Aesthetics
The Kylin V2 RTA came in cardboard sample packaging so will differ to the retail version. I received the Stainless Steel version, it's also available in Rainbow, Gun metal, Matte Black, Gold, Blue and Frosted Grey, all versions come with pre-installed 5ml bulge glass and Resin 810 drip tip. The Kylin V2 is quite a broad but short tank making it beefy looking, the base diameter is 24mm but it tapers out to match the 26mm top section and the bulge glass takes the diameter to 30mm. Both top and bottom of the tank as aesthetically pleasing texturing and the Resin drip tip sitting on top is quite a beauty. There is a small dot to mark where you need to push to open the top fill and the airflow control ring is dual cyclops with stopper. The air chamber that can be easily seen through the glass has "KYLINII" one side and the Vandyvape logo the other. The base see's etched branding and safety stamps and has a hybrid safe Gold plated 510. The overall quality is very good with good machining, threading and tolerances.
-----------------------------------------------------------------------------------------------------
KYLIN V2 Specs and Features:
Length: 38.15mm
Diameter: 24mm
Outside diameter: 26mm
Capacity: 3/5ml
G.W(included package): 134g
Bottom bevelled air intake & cambered surface air outlet
The Screw front press coils
Nifty slide out top filling system
Single & Dual coil support
Thread: 510
Colours: Rainbow, Stainless Steel, Gun metal, Matte Black, Gold, Blue, Frosted Grey
-----------------------------------------------------------------------------------------------------
It's Various Parts
The Kylin V2 is uncomplicated consisting of the top section which is an all in one piece comprising of the sliding top-cap, juice port and air chamber. The base section which comprises of the airflow inlets, airflow control ring and of course the deck completes the tank with the glass between the two. The glass is sealed in place via o-rings top and bottom and the air chamber screws onto the outside of the deck to securely hold the whole tank together. To remove the glass, just remove the base section then pinch one edge of the glass while pushing up inside the air chamber with your finger and it comes free with no dramas. When refitting the glass instead of fitting the pre-installed 5ml bulge glass their is the included 3ml straight glass option. The pre-installed drip tip is a very nice resin 810 (you can also fit your own), you also get a delrin 810 with sleeve giving it a lower profile and a 510 adaptor.
-----------------------------------------------------------------------------------------------------
The Airflow
The airflow control is dual cyclops with stopper which moves with very nice resistance. Below the deck is a piece inserted which is white in colour and appears to be ceramic. This piece actually acts as chambers from your airflow intakes directing the air into the bottom of the deck at an angle so when you look inside the open airflow slot instead of being able to see right through to the opposite slot you can see a White (what appears to be ceramic) wall about 3mm inside. The airflow outlets on the deck consists of 2 lines of 4 holes (8 holes in total) which will be directly underneath your coil/coils. Then we have a ramp both sides, each ramp has 3 angled slots, looking at this deck it doesn't matter whether doing a single build or dual you will get total air coverage of the coil/coils, this looks very promising. The air chamber ceiling is domed and nice and low to encourage flavour further.
-----------------------------------------------------------------------------------------------------
Review Continued Below:
