Hi Vaping Underground members, In this review i take a look at the Galaxies 30W Starter Kit 950mAh from Vapefly. The Vapefly Galaxies 30W Starter Kit 950mAh was supplied for the purpose of this review by Mindy from Vapefly.
https://www.vapefly.com/kit-GALAXIES-30W-KIT/
Introduction
Vapefly have grown in popularity and since initially specialising in RTA's, RDA's and RDTA's with clever innovative airflow designs more recently have started also releasing devices that have been met with similar enthusiasm!
The Galaxies 30W Starter Kit is a genuine starter kit but like none other offering a pod tank which allows for either MTL or RDL vaping styles and a stealth palm sized IP67 rated device with screen and two power modes.
It's a tiny device yet packs a 950mAh battery which gives reasonable battery life with the available high resistance coils. With both wattage and Bypass modes and both Galaxies Pod Tank (Galaxies Air) and Device able to be used independently with other devices and high resistance tanks the Galaxies 30W Starter Kit is a starter kit which allows the vaper to develop and find which direction they wish to travel, let's crack on!
___________________________________________________________________
In The Box
Contents:
1 x Galaxies Air Tank
1 x Galaxies 30W Mod
1 x FreeCoreTM 0.8ohm Coil
1 x FreeCoreTM 1.2ohm Coil
1 x Accessories Bag
1 x USB Cable
1 x Warranty Card
1 x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Galaxies 30W Kit comes in cardboard packaging with outer cardboard sleeve and on opening both device and Pod Tank are proudly displayed side by side. In this section i will just cover the Galaxies 30w device as the Galaxies Air Tank will be covered in a later section. I received the Blue version which has the main chassis covered in a thick Blue rubber material while the darker Blue central spine section is a thinner harder rubber which has a tree bark like raised design, the options are Pink, Brown, Blue, Black or Black & Brown.
Both sides towards the front, top and bottom we have that shockproof rubber casing as seen on other IP67 devices like the Aegis series, towards the back central we have the extension of the spine section. On one side we have a silicone plug section with Vapefly embossed and a small protruding tab at the top to help with removal this is to seal the USB connection, on the opposite side in the same position we have "GALAXIES" embossed into the rubber casing.
The face is a Black plastic panel with Black plastic buttons, towards the top we have the rectangular protruding fire button then lower down a screen, underneath the screen we have an horizontally positioned navigational rocker. On the rubber base we have 6 venting holes with a membrane seal underneath then moving up top towards the rear rather than a 510 plate we have more of a generous extended rim to the 510 threaded connection, the 510 is Gold plated and spring loaded.
As mentioned the Galaxies 30W device is tiny and just gets swallowed up by the hand, it's a cute little bugger!!!!!
___________________________________________________________________
Galaxies 30W Starter Kit Specs and Features:
Kit size: 24.75 x 34.88 x 93.30mm
Tank Size: 22.0 x 38.8mm
Mod Size: 24.75 x 34.88 x 54.30mm
Capacity: 2ml
Coils: FreeCoreTM 0.8ohm Coil(NI80,12W-18W)
FreeCoreTM 1.2ohm Coil(KA1,8W-12W)
Power: 5-30W
Battery: 950mAh
Charging: USB 5V 1A
The smallest rugged IP67 mod kit
MTL and RDL vaping with two types of coil
Bottom airflow control
Compatible with all upcoming FreeCoreTM G series coils
Thread: 510
Colours: Pink, Brown, Blue, Black, Black & Brown
___________________________________________________________________
The Galaxies Pod Tank (Galaxies Air Tank)
The Galaxies Air Tank is a pod tank which comprises of two sections, the top pod section and the bottom base tank section. The pod fits to the base section via a bayonet fitment making if quick to both separate and attach the two sections together. looking inside the base section we can see the same central positive and dual negative spring loaded contacts you would see in a pod bay on a pod mod, this base section then has a 510 thread as well as adjustable airflow ring!
The pod is one complete moulding so the drip tip can't be removed which is one of my few hang ups about this set-up, being suited for both MTL and RDL draws the mouthpiece is an halfway house and in my opinion not ideal for either, being able to fit more specialised MTL and RDL drip tips would of been much better.
The pod is also tinted quite dark and although i could see the juice level in certain light i did need to train my eyes so again a lighter pod would be an improvement!
Looking at the base you can see the bayonet fitting and central chamber section where a coil head gets press fitted into place. Finally on one side low down so hidden once fitted to the base section we have the silicone bung section, of course this means the pod needs removing to fill!
___________________________________________________________________
The Coils
2 coils are included which are the FreeCore G-series G1 Ni80 0.8ohm coil head rated from 12w to 18w and the FreeCore G-series G2 Kanthal 1.2ohm coil head rated from 8w to 12w. The Galaxies Pod Tank will also be compatible with future G-series coil heads!
To fit the coil head you first have to remove the Pod section from the base which being a bayonet fitting is just a quarter turn. This leaves you with the pod section which looks similar to other pod mod pods and the coil is fitted the same way by simply press fitting into place!
___________________________________________________________________
Filling
To fill you need to remove the pod from the base section which with the bayonet fitting is quick and easy to do with the tank on the device, no need to unscrew the tank first. Then simply lift up the rubber flap and pull the fill bung clear which reveals a good sized filling port which allowed for a quick mess free fill.
Fitting the bung back into position i found a little tricky at times but possibly just mine and it got easier the more i filled. Once filled again it's just a quarter turn to fix the pod back into the tank base section!
___________________________________________________________________
The Airflow
The base section has an airflow control ring just as on any standard stock coil tank which turns with a nice tolerance. The airflow has 2 small airflow holes and then a slot giving the choice of one hole open, two holes open or two holes with how much of the slot open that is required for the draw you are after! This allows for anything from a reasonably tight MTL right up to a RDL draw!
___________________________________________________________________
Review Continued Below:
https://www.vapefly.com/kit-GALAXIES-30W-KIT/
Galaxies 30w Kit By Vapefly - Evolution Vaping
The Vapefly Galaxies is the perfect companion for on the go, small, lightweight and ergonomic!
www.evolutionvaping.co.uk
Introduction
Vapefly have grown in popularity and since initially specialising in RTA's, RDA's and RDTA's with clever innovative airflow designs more recently have started also releasing devices that have been met with similar enthusiasm!
The Galaxies 30W Starter Kit is a genuine starter kit but like none other offering a pod tank which allows for either MTL or RDL vaping styles and a stealth palm sized IP67 rated device with screen and two power modes.
It's a tiny device yet packs a 950mAh battery which gives reasonable battery life with the available high resistance coils. With both wattage and Bypass modes and both Galaxies Pod Tank (Galaxies Air) and Device able to be used independently with other devices and high resistance tanks the Galaxies 30W Starter Kit is a starter kit which allows the vaper to develop and find which direction they wish to travel, let's crack on!
___________________________________________________________________
In The Box
Contents:
1 x Galaxies Air Tank
1 x Galaxies 30W Mod
1 x FreeCoreTM 0.8ohm Coil
1 x FreeCoreTM 1.2ohm Coil
1 x Accessories Bag
1 x USB Cable
1 x Warranty Card
1 x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Galaxies 30W Kit comes in cardboard packaging with outer cardboard sleeve and on opening both device and Pod Tank are proudly displayed side by side. In this section i will just cover the Galaxies 30w device as the Galaxies Air Tank will be covered in a later section. I received the Blue version which has the main chassis covered in a thick Blue rubber material while the darker Blue central spine section is a thinner harder rubber which has a tree bark like raised design, the options are Pink, Brown, Blue, Black or Black & Brown.
Both sides towards the front, top and bottom we have that shockproof rubber casing as seen on other IP67 devices like the Aegis series, towards the back central we have the extension of the spine section. On one side we have a silicone plug section with Vapefly embossed and a small protruding tab at the top to help with removal this is to seal the USB connection, on the opposite side in the same position we have "GALAXIES" embossed into the rubber casing.
The face is a Black plastic panel with Black plastic buttons, towards the top we have the rectangular protruding fire button then lower down a screen, underneath the screen we have an horizontally positioned navigational rocker. On the rubber base we have 6 venting holes with a membrane seal underneath then moving up top towards the rear rather than a 510 plate we have more of a generous extended rim to the 510 threaded connection, the 510 is Gold plated and spring loaded.
As mentioned the Galaxies 30W device is tiny and just gets swallowed up by the hand, it's a cute little bugger!!!!!
___________________________________________________________________
Galaxies 30W Starter Kit Specs and Features:
Kit size: 24.75 x 34.88 x 93.30mm
Tank Size: 22.0 x 38.8mm
Mod Size: 24.75 x 34.88 x 54.30mm
Capacity: 2ml
Coils: FreeCoreTM 0.8ohm Coil(NI80,12W-18W)
FreeCoreTM 1.2ohm Coil(KA1,8W-12W)
Power: 5-30W
Battery: 950mAh
Charging: USB 5V 1A
The smallest rugged IP67 mod kit
MTL and RDL vaping with two types of coil
Bottom airflow control
Compatible with all upcoming FreeCoreTM G series coils
Thread: 510
Colours: Pink, Brown, Blue, Black, Black & Brown
___________________________________________________________________
The Galaxies Pod Tank (Galaxies Air Tank)
The Galaxies Air Tank is a pod tank which comprises of two sections, the top pod section and the bottom base tank section. The pod fits to the base section via a bayonet fitment making if quick to both separate and attach the two sections together. looking inside the base section we can see the same central positive and dual negative spring loaded contacts you would see in a pod bay on a pod mod, this base section then has a 510 thread as well as adjustable airflow ring!
The pod is one complete moulding so the drip tip can't be removed which is one of my few hang ups about this set-up, being suited for both MTL and RDL draws the mouthpiece is an halfway house and in my opinion not ideal for either, being able to fit more specialised MTL and RDL drip tips would of been much better.
The pod is also tinted quite dark and although i could see the juice level in certain light i did need to train my eyes so again a lighter pod would be an improvement!
Looking at the base you can see the bayonet fitting and central chamber section where a coil head gets press fitted into place. Finally on one side low down so hidden once fitted to the base section we have the silicone bung section, of course this means the pod needs removing to fill!
___________________________________________________________________
The Coils
2 coils are included which are the FreeCore G-series G1 Ni80 0.8ohm coil head rated from 12w to 18w and the FreeCore G-series G2 Kanthal 1.2ohm coil head rated from 8w to 12w. The Galaxies Pod Tank will also be compatible with future G-series coil heads!
To fit the coil head you first have to remove the Pod section from the base which being a bayonet fitting is just a quarter turn. This leaves you with the pod section which looks similar to other pod mod pods and the coil is fitted the same way by simply press fitting into place!
___________________________________________________________________
Filling
To fill you need to remove the pod from the base section which with the bayonet fitting is quick and easy to do with the tank on the device, no need to unscrew the tank first. Then simply lift up the rubber flap and pull the fill bung clear which reveals a good sized filling port which allowed for a quick mess free fill.
Fitting the bung back into position i found a little tricky at times but possibly just mine and it got easier the more i filled. Once filled again it's just a quarter turn to fix the pod back into the tank base section!
___________________________________________________________________
The Airflow
The base section has an airflow control ring just as on any standard stock coil tank which turns with a nice tolerance. The airflow has 2 small airflow holes and then a slot giving the choice of one hole open, two holes open or two holes with how much of the slot open that is required for the draw you are after! This allows for anything from a reasonably tight MTL right up to a RDL draw!
___________________________________________________________________
Review Continued Below:
Last edited: