Become a Patron!

Vapesoul VONE Kit. "Come to me!"

Vape Path

Member For 2 Years
Member For 1 Year
Unlisted Vendor
Today I would like to speak about Vapesoul VONE Kit – the innovative set, where you can find Bluetooth, built in box mod. Does it attract you? Yes, me too) So, let`s look at such a kit and think, will it has a success on the market!

DSC_0051.jpg

Vapesoul VONE Kit came to me in a big composite box, where on the sides you can find some info about the set, its features, contact info, and some other info, which is usual for vape devices.

DSC_1108.jpg

DSC_1110.jpg

Vapesoul VONE Kit set:
1 * Vapesoul 230W box mod;
1 *VONE atomizer;
2 * Replacement coil heads (0,15 Оhm, 40-120W);
1 * Spare glass tube;
5 * Spare o-rings;
1 * USB cable;
1 * User manual;
1 * Warranty card​

I can`t understand one thing: how with such a beautiful metal case and its form factor, Vapesoul made such pornographic plastic buttons?! They`re all of such a material.. We have security films on display and on buttons panel insert, but such a plastic..AAAArrr….
But! The assembly is good, I can`t say, that there are any mistakes here. Only moment is, that nowadays manufacturers like to make cracks between parts and here there is one.
The box mod suits the hand perfectly, without slipper and is pleasant for touch.

Vapesoul 230W parameters:
Sizes: 85 mm * 52 mm * 30 mm;
Colors: Black, Red, Grey, White​

On the face side of Vapesoul 230W there is a «Fire», «+», «-» buttons and micro USB port. The buttons don`t jingle, but «Fire» has a crack to main body and losts about 1 mm into it. The main stroke accounts to the top, and you can see that.

DSC_0061.jpg


The left part is occupied by a decorative insert with an engraving of the name of the company, and on the right side there is an average color display all in the same insert, the brightness of which is dim. In addition, below, on both sides, you can see several venting holes for to remove gases from the battery compartment.

DSC_0064.jpg

DSC_0070.jpg

On the back side manufacturer`s placed decorative cuts, emphasizing the overall design and also protruding by an additional element, which strengthens the coupling with the palm.

DSC_0066.jpg

On the top there is a 510 spring-loaded connector and the platform, which allows to set atomizers up to 28 mm contrary to the whole width – 30 mm.

DSC_0073.jpg

At the bottom we can see a sliding battery cover with direction in the form of an arrow. Inside there is a contact platform with polarity signs for to make setup easier. The cover works good and I haven`t met any accidental opens.

DSC_0076.jpg

The colored display shows such indices as wattage/temperature, battery indicator, company`s logo, resistance, voltage and mode name. All of them are decorated by some lines and their rows.

DSC_0085.jpg

For to turn the device on/off – push the «Fire» button for 5 times.

For to enter the menu – push the «Fire» button for 3 times and then see the following branches:

DSC_0087.jpg
DSC_0092.jpg

Working time – here you can set the cut time (up to 20 sec);

DSC_0088.jpg

Screen turn dark – allows you to adjust the time of dimming and so not very bright display;

DSC_0089.jpg

Screen turn off – here you can set the display off and move box mod to standby mode;

DSC_0090.jpg

Screen brightness – adjust the brightness level of the display. Default set is to 100%;

DSC_0091.jpg

Software version – firmware version;

DSC_0093.jpg

Find my phone – the function, which, with the help of Android/iOS application will help you to find your phone with the help of built-in Bluetooth.

DSC_0094.jpg

For to activate such a function, you need to install the app, allow it to find your location and then, poking blindly (Chinese language), will connect your smartphone to 230W box mod. Then you choose «Find» and will hear a lullaby melody ;)
Back – Allows you to go to main screen.

For to change the vape mode - clamp «+» and «-» button simultaneously for some seconds and then will be able to choose between Power, TC (Ni, Ti, SS) and DIY1/DIY2 (this are, as a fact M1, M2 modes with other names).

DSC_0104.jpg

For to lock and fade the display – push «Fire» and «+» at the same time.

DSC_0095.jpg
 
Last edited:

Vape Path

Member For 2 Years
Member For 1 Year
Unlisted Vendor
For to look at accurate resistanse- push «Fire» and «-» at the same time.

If the system find any mistakes or want to ask you about new atomizer – it will show you such a message on the screen.

DSC_0078.jpg
DSC_0111.jpg

Here`s the end of settings.

Vapesoul 230W box mod specifications:
Wattage: 10-230W;
Resistance: 0,1-3 Ohm;
Modes: VW, TC (Ni, Ti, SS), DIY 1,2;
Temperature range: 100-350℃/212-662℉;
Charging current: 2A;
Thread: of 510 type, spring-loaded;
Battery: Two high-rated 18650;
Protection list: Of Shirt circuit, low and high voltage, from discharge

In the chain with 230W box mod, manufacturer put the VONE subohm atomizer.
It has middle sizes, 4 ml capacity and is impressive in weight. As for quality and assembly, they`re good, but the most interesting thing - is a really convenient top cap opening system, which looks like SMOK TFV series, but a little bit different to them.
DSC_0121.jpg
Vapesoul VONE atomizer parameters:
Height: 55 mm;
Diameter: 24 mm;
Capacity: 4 ml;
Color: Black​

Atomizer consists of 5 parts: of base, replacement coil head, glass tube, top cap with filling ring and drip tip.

The base is made with bottom airflow, convenient notches and works in a chain with replacement coil heads of only one type with 0,15 Ohm resistance and 40-120W wattage. They fixes to it with the help of inside thread.
As for flavor, they produce it good, and the vapor is huge too, but I think, that only one type of coils is the wrong way. For example, I would like to test it with one or two-coil heads.
The tube is made of middle-width Pyrex glass,and if you break it – there is a spare one in the box.
DSC_0128.jpg

DSC_0134.jpg

Top cap is monolithic to a filling ring and has a side opening /closing system, and it`s different to SMOK in the way, that for to open it – you need to push two little buttons, situated on opposite sides. Then, with a jingle, top cap will lift up and you can fow your juice into tube. The filling window is long, but could be a little wider, because, for example, there will be some problems with twisted caps, and some juice will flow into niche for top cap.
DSC_0139.jpg

DSC_0135.jpg

Drip tip has a 510 type and `s made of Ultem-plastic, sits good without backlashes. While working on 40-80W it works without getting hot.
DSC_0124.jpg
Vapesoul VONE atomizer specifications:
Base: For replacement coil heads;
Airflow: Bottom;
Filling: Top;
Drip tip: of 510 type;
Thread: of 510 type with swimming pin​
DSC_0053.jpg

Pros:
Quality and assembly;
Design;
Flavor;
Vapor;
Bottom airflow;
Top filling;
Capacity;

Cons:
Narrow filling window;
No RBA base;
Only one type of heads;
Dim screen;
CV
My opinion about Vapesoul VONE Kit could be only positive, but there are some moments, and because of them I can mark it only with «4-» balls.
The first critical moment is plastic of buttons. As I have already told you, I don`t like it and think, that metal could be more suitable. The second is, that the screen is dim…Really dim…
Next moment is, that I prefer rebuildable atomizers with with RBA or their own decks. Moreover, there`s only one replacement type of coil head..Why? Why not 2, 3, 1 coil variations? The last one critical moment is, that the filling hole could be a little wider…
«Find my phone» is an interesting function, but I think, that it`s only liker a toy..)
As for the price, Vapecoul VONE Kit costs about 45-55$, and I think, that it`s pretty good, and that the Co. put it on a normal level.​


You can buy Vapesoul VONE Kit here.
 

VU Sponsors

Top