I received target pm80 se from Vaporesso for the purpose of this review.
Vaporesso target pm80 se colors:
- Blue
- Red
- Purple
- Black
- Green
- Silver
Specifications:
- Size: 121.3mm x 24.8mm x 33.8mm
- Display: Oled 0.91inch
- Capacity: 4ml / 2ml
- Charging: 2A
- Power output: 5-80w
- Battery: 18650
In the box:
- VAPORESSO TARGET PM80 SE device
- 2 x VAPORESSO TARGET PM80 POD (4ml)
- GTX 0.2Ω mesh coil
- GTX 0.6Ω mesh coil
- 2 x Airflow silicone plug
- USB cable
- User manual
- Warranty card
- Reminder card
Vaporesso target pm80 se is device that you can use for mtl and for dtl vaping. You can buy this device in 6 different colors which is okay in my opinion. Device is powered by one 18650 battery and it works from 5-80w. Dimensions of the device are 121.3mm x 24.8mm x 33.8mm and as previous version of the device, this feels nice in the hand and also it is really comfortable for using. Build quality of the device is really good, everything is as it should be and there is no any rattling. On the device on one side you can see "Vaporesso target pm80 SE". Package is really good, in the package you will receive 4 airflow plugs, two cartridges and two coils which is really nice.
So, in the package you will receive two cartridges which is really good because you can carry with you always both cartridges and you can have different liquid in cartridges or you can use one cartridge for mtl and the other for dtl vaping, also you can just keep one in case that you break the first one, really nice. Cartridge stays in the place with magnets and magnets are very good, cartridge stays perfectly inside. This device is compatible with pm80 cartridges which is nice. From the top side of the cartridge you can see the mouthpiece and in my opinion it is comfortable for using. Capacity of the cartridge is 4ml which is really good capacity. From the bottom of the cartridge you can see the plug and when you pull the plug you can see the fill hole. You can fill the cartridge with gorilla bottles without any problems. On this cartridge you are also able to change the coil from the bottom, all you need to do is to pull one out and put the other one inside. So you can pretty much easy change the coil here. Because of beginners I need to say that when you use the coil for the first time you need to prime the coil with few drops of e liquid and after that you can put the coil inside and fill the cartridge. In the package you will receive two coils, you will receive 0.2ohm mesh coil and recommended wattage for this coil is 45-60w, also in the package you will receive 0.6ohm mesh coil, recommended wattage for this coil is 20-30w.
From the top side of the device you can see the slot with magnets inside and also you can see the connection here. Also on the top side of the mod you can see 3 airflow holes on each side. In the package you will receive 4 airflow plugs and you can adjust the airflow. On the device you can see the usb port that you can use for battery charging, this device supports 2A charing. This device is powered by one 18650 battery and you can see the battery door on the bottom of the mod. So far battery door works good and when you put the battery inside and when you shake the device there is no any rattling. On the front side of the device you can see the fire button, the screen and plus and minus buttons. The fire button is protruding and so far it works really good, plus and minus buttons are good too. On this device we have 0.96inch screen and this is not a color screen which some people will like and someone will not like, anyway brightness of the screen is really good and you can see everything on the screen. You can use this device from 5-80w.
To turn on the device you need to click 5 times on the fire button and to turn it off you need to do the same. When you turn on the device on the screen you will see:
- Battery indicator in percentage
- Working mode
- Coil resistance
- Puff counter
- W
- Best
- Puff time (when you hold the fire button)
To enter the menu you need to hold plus and minus buttons and when you enter the menu you can see:
- Smart vw
- Vw
- Vv
- Default
- Exit
On this device we can use vv working mode which I know that many people like and also we have here smart vw working mode and when you use this working mode the device will automatically set the wattage for coil that you attach.
You can lock the device when you click 3 times on the fire button, you need to do the same to unlock the device. When you lock the device you can vape but you can't use plus and minus buttons.
When you press the fire button and plus button you will flip the screen.
My thoughts:
So, vaporesso target pm80 se is available in 6 different colors. Design of the device is really nice in my opinion, similar as previous version and build quality is good and there is no complains, everything is as it should be and you can't hear any rattling when you put the battery inside. Same as previous version target pm80 se is comfortable for using and feels nice in the hand. The package is really good, in the package you will receive more than with other devices, you will receive 4 airflow plugs, two cartridges and two coils which is really amazing. The mouthpiece is comfortable for using, but you can't use here other drip tips which will be a con for someone. Capacity is 4ml which is good capacity for this device. You can fill the cartridge without any problems with gorilla bottles and cartridge stays perfectly in the place. The screen here is different and this is not a color screen as on previous version, but brightness of the screen is good and you can see everything on the screen. On this device you can adjust the airflow using the plugs from the package, maybe it is not very convenient but it is a big pro that we can adjust the airflow. We can close the airflow only from one side or from both sides, also you can cut the plug and then cover only one or two holes if you like. There is a lot of airflow when it is fully opened and when you close the airflow completely you can have really nice mtl draw. With this device you will receive two coils and this device is compatible with many coils. Also for this device you can buy rba head which is great. So, this device is compatible with 0.2ohm mesh coil, 0.3ohm mesh coil, 0.6ohm mesh coil, 0.8ohm mesh coil, 1.2ohm coil and rba coil. As I said in previous review I tried many coils with this device and I can say that coils performs really good. Coil for mtl is also really good in my opinion. It is really nice that you can buy dtl or mtl coils for this device and because of that this device will be interesting for beginners. Flavor with premade coils is really good and premade coils performs really great. Building on rba head is really simple and considering that this is a starter kit beginners can use premade coils and after learn how to build on rba and save some money which is really good. Flavor with rba coil is also really good and airflow hole under the coil is about 2mm, you can use this rba for mtl or for restrictive dtl vaping, perosanlly I like to use this coil for restrictive dtl vaping. In my opinion this is another device from vaporesso that is really good and user friendly device, many coils are available and now you can use 18650 battery whcih is great, I personally really like the device.
Cons:
- Can't use other drip tips
- No usb c
Pros:
- Color options
- Good build quality
- Comfortable device
- 18650 battery
- 4 airflow plugs in the package
- Two coils in the package
- Two cartridges in the package
- 4ml capacity
- Easy to fill
- Cartridge stays nice in the place
- Brightness of the screen is good
- Fire button and plus and minus buttons are good
- Vv working mode
- Smart vw working mode
- Good flavor
- You can use it as mtl or dtl device
- Rba head
Thanks Vaporesso
You can buy it here: Vaporesso target pm80 se
Vaporesso target pm80 se colors:
- Blue
- Red
- Purple
- Black
- Green
- Silver
Specifications:
- Size: 121.3mm x 24.8mm x 33.8mm
- Display: Oled 0.91inch
- Capacity: 4ml / 2ml
- Charging: 2A
- Power output: 5-80w
- Battery: 18650
In the box:
- VAPORESSO TARGET PM80 SE device
- 2 x VAPORESSO TARGET PM80 POD (4ml)
- GTX 0.2Ω mesh coil
- GTX 0.6Ω mesh coil
- 2 x Airflow silicone plug
- USB cable
- User manual
- Warranty card
- Reminder card
Vaporesso target pm80 se is device that you can use for mtl and for dtl vaping. You can buy this device in 6 different colors which is okay in my opinion. Device is powered by one 18650 battery and it works from 5-80w. Dimensions of the device are 121.3mm x 24.8mm x 33.8mm and as previous version of the device, this feels nice in the hand and also it is really comfortable for using. Build quality of the device is really good, everything is as it should be and there is no any rattling. On the device on one side you can see "Vaporesso target pm80 SE". Package is really good, in the package you will receive 4 airflow plugs, two cartridges and two coils which is really nice.
So, in the package you will receive two cartridges which is really good because you can carry with you always both cartridges and you can have different liquid in cartridges or you can use one cartridge for mtl and the other for dtl vaping, also you can just keep one in case that you break the first one, really nice. Cartridge stays in the place with magnets and magnets are very good, cartridge stays perfectly inside. This device is compatible with pm80 cartridges which is nice. From the top side of the cartridge you can see the mouthpiece and in my opinion it is comfortable for using. Capacity of the cartridge is 4ml which is really good capacity. From the bottom of the cartridge you can see the plug and when you pull the plug you can see the fill hole. You can fill the cartridge with gorilla bottles without any problems. On this cartridge you are also able to change the coil from the bottom, all you need to do is to pull one out and put the other one inside. So you can pretty much easy change the coil here. Because of beginners I need to say that when you use the coil for the first time you need to prime the coil with few drops of e liquid and after that you can put the coil inside and fill the cartridge. In the package you will receive two coils, you will receive 0.2ohm mesh coil and recommended wattage for this coil is 45-60w, also in the package you will receive 0.6ohm mesh coil, recommended wattage for this coil is 20-30w.
From the top side of the device you can see the slot with magnets inside and also you can see the connection here. Also on the top side of the mod you can see 3 airflow holes on each side. In the package you will receive 4 airflow plugs and you can adjust the airflow. On the device you can see the usb port that you can use for battery charging, this device supports 2A charing. This device is powered by one 18650 battery and you can see the battery door on the bottom of the mod. So far battery door works good and when you put the battery inside and when you shake the device there is no any rattling. On the front side of the device you can see the fire button, the screen and plus and minus buttons. The fire button is protruding and so far it works really good, plus and minus buttons are good too. On this device we have 0.96inch screen and this is not a color screen which some people will like and someone will not like, anyway brightness of the screen is really good and you can see everything on the screen. You can use this device from 5-80w.
To turn on the device you need to click 5 times on the fire button and to turn it off you need to do the same. When you turn on the device on the screen you will see:
- Battery indicator in percentage
- Working mode
- Coil resistance
- Puff counter
- W
- Best
- Puff time (when you hold the fire button)
To enter the menu you need to hold plus and minus buttons and when you enter the menu you can see:
- Smart vw
- Vw
- Vv
- Default
- Exit
On this device we can use vv working mode which I know that many people like and also we have here smart vw working mode and when you use this working mode the device will automatically set the wattage for coil that you attach.
You can lock the device when you click 3 times on the fire button, you need to do the same to unlock the device. When you lock the device you can vape but you can't use plus and minus buttons.
When you press the fire button and plus button you will flip the screen.
My thoughts:
So, vaporesso target pm80 se is available in 6 different colors. Design of the device is really nice in my opinion, similar as previous version and build quality is good and there is no complains, everything is as it should be and you can't hear any rattling when you put the battery inside. Same as previous version target pm80 se is comfortable for using and feels nice in the hand. The package is really good, in the package you will receive more than with other devices, you will receive 4 airflow plugs, two cartridges and two coils which is really amazing. The mouthpiece is comfortable for using, but you can't use here other drip tips which will be a con for someone. Capacity is 4ml which is good capacity for this device. You can fill the cartridge without any problems with gorilla bottles and cartridge stays perfectly in the place. The screen here is different and this is not a color screen as on previous version, but brightness of the screen is good and you can see everything on the screen. On this device you can adjust the airflow using the plugs from the package, maybe it is not very convenient but it is a big pro that we can adjust the airflow. We can close the airflow only from one side or from both sides, also you can cut the plug and then cover only one or two holes if you like. There is a lot of airflow when it is fully opened and when you close the airflow completely you can have really nice mtl draw. With this device you will receive two coils and this device is compatible with many coils. Also for this device you can buy rba head which is great. So, this device is compatible with 0.2ohm mesh coil, 0.3ohm mesh coil, 0.6ohm mesh coil, 0.8ohm mesh coil, 1.2ohm coil and rba coil. As I said in previous review I tried many coils with this device and I can say that coils performs really good. Coil for mtl is also really good in my opinion. It is really nice that you can buy dtl or mtl coils for this device and because of that this device will be interesting for beginners. Flavor with premade coils is really good and premade coils performs really great. Building on rba head is really simple and considering that this is a starter kit beginners can use premade coils and after learn how to build on rba and save some money which is really good. Flavor with rba coil is also really good and airflow hole under the coil is about 2mm, you can use this rba for mtl or for restrictive dtl vaping, perosanlly I like to use this coil for restrictive dtl vaping. In my opinion this is another device from vaporesso that is really good and user friendly device, many coils are available and now you can use 18650 battery whcih is great, I personally really like the device.
Cons:
- Can't use other drip tips
- No usb c
Pros:
- Color options
- Good build quality
- Comfortable device
- 18650 battery
- 4 airflow plugs in the package
- Two coils in the package
- Two cartridges in the package
- 4ml capacity
- Easy to fill
- Cartridge stays nice in the place
- Brightness of the screen is good
- Fire button and plus and minus buttons are good
- Vv working mode
- Smart vw working mode
- Good flavor
- You can use it as mtl or dtl device
- Rba head
Thanks Vaporesso
You can buy it here: Vaporesso target pm80 se