Ok so I’m new to vaping. I got the v8 stick. When I first got it, it pulled pretty good. The next coil I got didn’t pull worth a darn. I’m not sure what the difference is in coils. I just took it in and asked for a new coil and they just gave me one. Not sure why one pulls harder and has better flavor than the other. Please help thanks!
Become a Patron!
Very new and confused
- Thread starter kfd314
- Start date
What wattage were you vaping at? Was it at a higher wattage than that? It may be you need a lower ohm coil. Some one should come along that has one.
Do you have another coil you can try and put in it? See if that help. There are defects in coils from time to time.
Do you have another coil you can try and put in it? See if that help. There are defects in coils from time to time.
Last edited:
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
If this is it then you can see what coil came pre-installed and another in the package. Most likely they sold you a coil different than what you had. They probably didn't have it so they sold you anything. Learn your device.
https://www.smoktech.com/kit/stick-v8
https://www.smoktech.com/kit/stick-v8
Vape fan beat me to it. It should of came with two coils as said above. Neither are 0.6, much lower. Put the other coil in and see how it works for you.
Then order yourself a box or two of coils. Buying one at a time is asking for trouble unless you have another back up device. Word of advice is have a back up and you probably will end up with a back up to the back up and another after that.
Then order yourself a box or two of coils. Buying one at a time is asking for trouble unless you have another back up device. Word of advice is have a back up and you probably will end up with a back up to the back up and another after that.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Having back up is pretty essential if your wanting to not smoke. Invariably there's going to be a reason why your current set-up won't work.
When you can, invest in a better mod and another tank, and use the schtick as a back up.
When you can, invest in a better mod and another tank, and use the schtick as a back up.
I used to have one .
You have to use the Smok M2 coils with it.
I tried others like the Q4 and such and they won't work well because they require more power than the Stik can put out.
You have to use the Smok M2 coils with it.
I tried others like the Q4 and such and they won't work well because they require more power than the Stik can put out.
Your problem imo is you are using a NON regulated device with an atty or at least coil heads that work best with regulation.... in this case the ability to increase or decrease voltage output.. and resulting wattage.
My suggestion a regulated mod or learn to build coils.
Sent from my SCH-I605 using Tapatalk
My suggestion a regulated mod or learn to build coils.
Sent from my SCH-I605 using Tapatalk
Last edited:
I am not sure why vape shops push this to people beginning to vape but they all seem to do it, well I shouldn't say all but most.
Guy that worked for me wouldn't listen to me went and the vape shop set him up with the same set up. He hated it, I gave him a
eleaf 100w and the melo tank I had sitting around, set him up and he was loving it. I assume he is still using it, I had to fire him but last I knew he wasn't smoking !
Its basically an all in one, with some safety features. For example, unlike a true mechanical mod, this smok stick is limited to how low resistance it will fire, temp and max wattage out. (Though I haven't read the specs in awhile)
So basically, with the M2 coils.. it is a one button device and easy to use. (unless you try to replace the coil with a regular BB coil. Gotta have those M2s.