Very proud!

[Skullzz]

I just made my very first coil ever! It's nothing special and I have a ton to learn yet but I am so proud of myself for doing it! It's very basic and simple but it's something I made on my own ️

Sent from a pay phone

 

[TygerTyger]

and so it begins! I remember mine! Good for you, hope it fires beautifully, and it will be only the first of MANY..... kudos to you

 

[Skullzz]

and so it begins! I remember mine! Good for you, hope it fires beautifully, and it will be only the first of MANY..... kudos to you

I don't think I will fire it, I will frame it lolol. Thank you for the words of encouragement

 

[KarmicRage]

It's the start of a long road but a satisfying one good work

Sent from my SM-N9005 using Tapatalk

 

[Puff]

Awesomeness I just learned to build last month be warned it is addictive.

Sent from my LG-V930 using Tapatalk

 

[AndriaD]

WTG, skully! Next thing you know, you'll be blathering about claptons and aliens and other such esoterica... I still use a plain ol 29ga 3/32 8 or 9 wrap, personally.

Andria

 

[Countrypami]

 

[Skullzz]

WTG, skully! Next thing you know, you'll be blathering about claptons and aliens and other such esoterica... I still use a plain ol 29ga 3/32 8 or 9 wrap, personally.

Andria

The wire I used was what came in the "coil designer kit" by LTQ Vapor. It says it is kanthal A1 24 gauge....I have to figure out the gauges. Is 24 gauge wire thicker than 26 gauge? Or is it the other way around? I would prefer a thicker wire personally.

 

[Skullzz]

Awesomeness I just learned to build last month be warned it is addictive.

Sent from my LG-V930 using Tapatalk

Yes it is addictive! I have already made a handful more lol.

 

[Alter]

Building coils is a satisfying experience, nothing better than vaping off coils you made. All your going to do is get better, faster and more finicky about the builds so enjoy the journey to a vastly improved vape experience by kicking those stock coils to the curb. Making the coil is the first step, wicking it is the real trick to master, all attys have different wicking methods so lots of good wicking info around so absorb it all in then find a way that works best.

ya..lower the number the thicker the wire is. The thicker the wire the lower ohms the build will be.

 

[Skullzz]

ya..lower the number the thicker the wire is. The thicker the wire the lower ohms the build will be.

That's what I thought but was not 100% sure. I am just playing around right now, I do not intend to fire any of these coils up until I know a little more about what I am doing. Thank you for answering that for me, appreciate it!

 

[Synphul]

I don't know if you have one already or not, check out the coilmaster jigs. They're not earth shattering gizmos but really simple to use and for basic or smaller coils (ie not 6-10+ multistrand complicated coils) it makes consistent coils every time. Plus I find using the coil rod makes coil positioning really simple. Covers 1.5mm to 4mm coil diameters.

Congrats on a good looking first coil. It's satisfying knowing if all else fails you're capable of at least making a simple decent performing coil. At least that's how I feel about it, self reliance.

If it says it came with 24ga kanthal then you may want to try 20 or 22ga kanthal for thicker wire.

 

[Teresa P]

Very nice, @Skullzz!
@CrazyChef v2.0, could you please repost the pic of your first coil for comparison? LOL!!

 

[KingPin!]

I just made my very first coil ever! It's nothing special and I have a ton to learn yet but I am so proud of myself for doing it! It's very basic and simple but it's something I made on my own ️

Sent from a pay phone

Congrats ....welcome to the world of coil DIY it's not so scary over there!

 

[32bitlord]

I just made my very first coil ever! It's nothing special and I have a ton to learn yet but I am so proud of myself for doing it! It's very basic and simple but it's something I made on my own ️

Sent from a pay phone

Next thing you know you'll be making aliens!


Sent from my Apple Newton using Tapatalk

 

[Skullzz]

I don't know if you have one already or not, check out the coilmaster jigs. They're not earth shattering gizmos but really simple to use and for basic or smaller coils (ie not 6-10+ multistrand complicated coils) it makes consistent coils every time. Plus I find using the coil rod makes coil positioning really simple. Covers 1.5mm to 4mm coil diameters.

Congrats on a good looking first coil. It's satisfying knowing if all else fails you're capable of at least making a simple decent performing coil. At least that's how I feel about it, self reliance.

If it says it came with 24ga kanthal then you may want to try 20 or 22ga kanthal for thicker wire.

I just bought the Coil Master v4 last night...can't wait to get it. Think I will definitely need it for more advanced coils!

 

[KingPin!]

I just bought the Coil Master v4 last night...can't wait to get it. Think I will definitely need it for more advanced coils!

Use mine all the time love it!

 

[Eggen]

That is a clean looking coil man! Like others have already said it progresses fast! If you need any tips on learning new coils just hop over to the "post your builds thread". There are some real pro's there that can give you some great advice that will really launch you Into the world of exotic coils!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[CrazyChef v2.0]

I just made my very first coil ever! It's nothing special and I have a ton to learn yet but I am so proud of myself for doing it! It's very basic and simple but it's something I made on my own ️

Sent from a pay phone

VERY nice!!! Your first coil is very nicely done - evenly wrapped, good choice of wire, and I'm sure it will give a very satisfying vape. My first build was horrible, as you'll see in a minute. I've gotten much better, as undoubtedly you will also.

Very nice, @Skullzz!
@CrazyChef v2.0, could you please repost the pic of your first coil for comparison? LOL!!

But of course!

@Skullzz Here's my first attempt. I've gotten much better since this photo was taken...

 

[EMusic]

I just bought the Coil Master v4 last night...can't wait to get it. Think I will definitely need it for more advanced coils!

Awesome! Building is very satisfying and the Coil Master kits have everything you need to build great coils. Way to go!

 

[bx10r]

I felt the same after my 1st build.. I've learned twisted and claptons so far. My best vape tho i find come from my simple builds.. so i always tell myself
K.i.s.s(keep it simple stupid) lol... good luck on your new journey

Sent from my SM-G950U using Tapatalk

 

[EMusic]

I felt the same after my 1st build.. I've learned twisted and claptons so far. My best vape tho i find come from my simple builds.. so i always tell myself
K.i.s.s(keep it simple stupid) lol... good luck on your new journey

Sent from my SM-G950U using Tapatalk

Sweet pic! Nice coils.

 

[bx10r]

Sweet pic! Nice coils.

Thanks. .. they fire nicely too

Sent from my SM-G950U using Tapatalk

 

[Lotus Insane]

Very nice Skullzz, welcome to the DIY team. Making coils is always fun and a great way of saving money. If you ever get into claptoning wire, make sure to pick up some ball bearing swivels, they really do help.

 

[EMusic]

@Skullzz you can find ball-bearing swivels at fishing stores.

 

[Skullzz]

Thanks for all the tips and words of encouragement. I am already shopping around for new wire lolol.


Sent from a pay phone

 

[bx10r]

Thanks for all the tips and words of encouragement. I am already shopping around for new wire lolol.


Sent from a pay phone

I used this
Look at this on eBay http://www.ebay.com/itm/222454626215

Sent from my SM-G950U using Tapatalk

 

[twan013]

Nice! I started building last week. For the life of me I can't get kanthal figured out for anything, but I can blindly wrap a multi strands fused Clapton and get incredible results... Go figure. I haven't actually "made" my own wire. I have a spool of coilology stuff.

You've given me inspiration to try to get something to work with my kanthal. My problem is that I think I'm trying to hard. Dual parallel, too many wraps, etc.


Sent from my iPhone using Tapatalk

 

[KarmicRage]

Best advice anyone can give is you've got to start somewhere. Start wrapping straight coils, before ya know it you'll be making your own wire. It really is quite easy to pick up, fair bit harder to put back down though lol

Sent from my SM-N9005 using Tapatalk

 

[CrazyChef v2.0]

fair bit harder to put back down though

 

[KarmicRage]

It's right innit? I was happy with my freehand claptons til I learned the swivel technique and once the swivels came the fused claptons and staggered claptons came. It's satisfying vaping something you're proud to have made yourself.

Sent from my SM-N9005 using Tapatalk

 

[SkoldVape]

Congrats on your first coil!
My coils are still like that to this day, I do a few wraps with a single coil & vape at 10 watts so when I like at these triple coil decks I'm like WTF!

 

[KarmicRage]

Rather enjoy a single coil myself. Easier to control the heat coming off it than a dual or bigger. Seen hex coils, the fuck? Like putting ya mouth on a reactor :/

Sent from my SM-N9005 using Tapatalk

 

[SkoldVape]

Rather enjoy a single coil myself. Easier to control the heat coming off it than a dual or bigger. Seen hex coils, the fuck? Like putting ya mouth on a reactor :/

Sent from my SM-N9005 using Tapatalk

It's just getting outta control, it's like some stupid fucking fashion parade if you ask me. Everyone trying to stay updated to the latest trend.

 

[KarmicRage]

My belief on trends is if you follow them you don't think for yourself. Fashion or otherwise. Swim against the current sometime, it'll open your eyes to how other people think.

Sent from my SM-N9005 using Tapatalk

 

[AndriaD]

My belief on trends is if you follow them you don't think for yourself. Fashion or otherwise. Swim against the current sometime, it'll open your eyes to how other people think.

Sent from my SM-N9005 using Tapatalk

Exactly why I feel zero need for all this high-wattage or sub-ohm vaping -- 8w got me off cigarettes; 9-10 watts has kept me that way for 3 yrs. Why would I ever need more?

Andria

 

[Skullzz]

Exactly why I feel zero need for all this high-wattage or sub-ohm vaping -- 8w got me off cigarettes; 9-10 watts has kept me that way for 3 yrs. Why would I ever need more?

Andria

My sweet spot is about 60w-80w. I doubt I will be able to make anything anytime soon that I can vape at that wattage lol. I need to learn more about ohms law before I try to vape anything I make. Right now I am just making coils for practice.


Sent from a pay phone

 

[AndriaD]

My sweet spot is about 60w-80w. I doubt I will be able to make anything anytime soon that I can vape at that wattage lol. I need to learn more about ohms law before I try to vape anything I make. Right now I am just making coils for practice.


Sent from a pay phone

60-80 watts is a good wattage... for lightbulbs. Since I can't even touch those with my fingers when they're lit, I don't think I'll be vaping at that wattage EVER. It makes me cringe just to think about it.

Andria

 

[SkoldVape]

My belief on trends is if you follow them you don't think for yourself. Fashion or otherwise. Swim against the current sometime, it'll open your eyes to how other people think.

Sent from my SM-N9005 using Tapatalk

I totally agree, I call them sheep cos they follow the heard.

& you do right Andria, I agree with sticking to what works & high wattage vaping with low strength nicotine doesn't keep me off stinkies. Sure people laugh at my setups but it's that 10 watts an high nicotine keeping me off cigarettes. I have recently tried sub ohming an it's not for me!

 

[SkoldVape]

60-80 watts is a good wattage... for lightbulbs. Since I can't even touch those with my fingers when they're lit, I don't think I'll be vaping at that wattage EVER. It makes me cringe just to think about it.

Andria

You an me both! It would kill me!

 

[AndriaD]

I totally agree, I call them sheep cos they follow the heard.

& you do right Andria, I agree with sticking to what works & high wattage vaping with low strength nicotine doesn't keep me off stinkies. Sure people laugh at my setups but it's that 10 watts an high nicotine keeping me off cigarettes. I have recently tried sub ohming an it's not for me!

You an me both! It would kill me!

I guess it's all in the huge airflow keeping it cool, that makes it possible, but that would make it totally unsatisfying to me -- I didn't huff my cigarettes, and I don't huff my vape.

But I'm using 3mg, at 9.5w... I've never found nicotine very addictive or satisfying; for me it's mostly just been the behavior-mimicry, and at first, the WTA -- getting free of MAOIs was a real challenge!

Andria

 

[SkoldVape]

I guess it's all in the huge airflow keeping it cool, that makes it possible, but that would make it totally unsatisfying to me -- I didn't huff my cigarettes, and I don't huff my vape.

But I'm using 3mg, at 9.5w... I've never found nicotine very addictive or satisfying; for me it's mostly just been the behavior-mimicry, and at first, the WTA -- getting free of MAOIs was a real challenge!

Andria

I've found getting off alot of things challenging but cigarettes is actually hands down is the hardest an I'm still trying to quit as we speak.
But yeah... the mimicry thing you said makes sense. My friend is using an endura T18 an has quit straight away but I see a friend using an alien whose still tying to quit. I let him try a Kayfun an he said "this is just what I've been searching for"
I told him not to listen to a shop who are just trying to sell their most popular expensive kit!!

 

[KarmicRage]

You're right, it is all about air flow. Can't have a complex build with no airflow cause the coils will just burn. It's the action of drawing air in that keeps the temperature down. I have huffed cigarettes when I've been stressed myself, sometimes as many as 4 as soon as I wake up. About 70 watts is a comfortable vape for me. With most RDA's that is. My newest one the wondervape just seems to get too hot straight away, even though it has more airflow than my others :/

Sent from my SM-N9005 using Tapatalk

 

[SkoldVape]

I vape from 10 watts to 80. Depends what I'm using.
This war of MTL & DL is fucking stupid though.
I had this teen laughing at me for using a nautilus mini.
Then following day he was in vape shop & I pulled out my RDA an he was like "wow you blowing clouds bro"
I said you fucking contradictory bastard how are you even getting served in here!!

 

[SkoldVape]

You're right, it is all about air flow. Can't have a complex build with no airflow cause the coils will just burn. It's the action of drawing air in that keeps the temperature down. I have huffed cigarettes when I've been stressed myself, sometimes as many as 4 as soon as I wake up. About 70 watts is a comfortable vape for me. With most RDA's that is. My newest one the wondervape just seems to get too hot straight away, even though it has more airflow than my others :/

Sent from my SM-N9005 using Tapatalk

Some tanks/rdas/rtas/rdtas do get hotter than others. It's just how a tank is built

 

[Skullzz]

Getting a bit better! Still kinda rough where I start making it. Have to work on that.

Sent from a pay phone

 

[champton]

Yeah, those Coilmaster kits really work wonders. I will absolutely swear by both the quality of the tools and the quality of the coils you can make with those.

Sweet coils btw, especially for a first time out. My first coil came out all buggered, LOL!

 

[bx10r]

Getting a bit better! Still kinda rough where I start making it. Have to work on that.

Sent from a pay phone

You using a jig? Here's some image with my jig. ..4mm id, now i do 3.5 . If using a jig, remove coil after you finished your wraps and insert back in the opposite direction to clean up the 1st coil... make sense?

Sent from my SM-G950U using Tapatalk

 

[bx10r]

These are fort my cloud king 3 coil rba,

Sent from my SM-G950U using Tapatalk

 

[KarmicRage]

That's jogged my mind. If you're saying only the 1st wrap is untidy what you should do is wrap an extra one when wrapping the coil, then just pull the first wrap out by leaving the coil on whatever you're wrapping it round and pulling on the leg leading to the first wrap with a pair of pliers. The coil will rotate round, pulling that wrap out and leaving you with a nice tight coil

Sent from my SM-N9005 using Tapatalk