Become a Patron!

Vmod XL with all the extras, dropped to $75.00-Sold!

Status
Not open for further replies.

Johnny B

Member For 4 Years
Member For 3 Years
Rating - 100%
3   0   0
I have a Vmod Xl that I do not use as much as I use to, so I'm trying to pass it on to someone that would like to try bottom feeding.
It comes with the following:
Vmod XL with the gray body and an extra cone
3 new 2.0 ohm hybrid atomisers
2 slightly used 2.0 ohm hybrids( they were cleaned with an ultrasonic cleaner, then given a good vodka bath)
complete o-ring kit
8 new bottles(from using different juices)
Nimbus(clone) set up to use on the Vmod (center pin is drilled out, extra air hole added) with the 510 extension and needed o-rings to run the mod on the XL
2 18605 batteries (1 from Vapage, 1 from Totally Wicked) both are in great shape
Price is $85.00 plus shipping, I think I can send it any where in the US for $5.00 and that will include tracking

If you have any questions, please feel free to ask and I will answer as soon as I can.
Thanks for taking the time to look.
 

Cessnapix

Silver Contributor
Member For 4 Years
Member For 3 Years
Rating - 0%
0   0   0
Unless you have a 50 watt or or higher, a Nemesis type cloneor other tube mod, no one around here wants anything to do with it. Unless you give it away. Then they are happy to take it off your hands.

Most people on here, including the verified reveiwers, do not have a clue what so ever about the use of a bottom feed device. The ones that do aleadt own the REO.

Maybe if you put a link to the site it will help you. Post it some place else you may have better luck.
 

Mistywjd

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Rating - 0%
0   0   0
I've been looking at the reo and came across the vmod in my search… debated it but 85$ is only 15$ less than pre-owned reo… so have u ever used a reo and if you have, does the vmod compare? and do u have any pics? I'm a girl w/small hands and was looking at the "mini's" of both mods. how large is the xl? I'm still trying to find something that I'm content with, so sorry for all the questions. : )
 

Johnny B

Member For 4 Years
Member For 3 Years
Rating - 100%
3   0   0
I've been looking at the reo and came across the vmod in my search… debated it but 85$ is only 15$ less than pre-owned reo… so have u ever used a reo and if you have, does the vmod compare? and do u have any pics? I'm a girl w/small hands and was looking at the "mini's" of both mods. how large is the xl? I'm still trying to find something that I'm content with, so sorry for all the questions. : )
I've never used a REO so I can't compare the two. The xl is just under 33/4" tall. I've taken a couple of pics for you, hope they help. And if you should decide on the xl, I'll drop the price to $70 for you. Vmod Xl.jpg Vmod xl 2.jpg
 

Mtlblade

Member For 4 Years
Member For 3 Years
Rating - 0%
0   0   0
That is for the smaller version and those codes are normally only good for a few days

Sent from my SCH-I535 using Tapatalk
 

HiTechRedneck

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Rating - 0%
0   0   0
What is the depth and width of the cup in mm on these?
 

Johnny B

Member For 4 Years
Member For 3 Years
Rating - 100%
3   0   0
I'm not at hone right now, so I can't measure the cup. But I do know that any 510 connection will fit. To use a RDA you have to use a 510 extension. As soon as I return from vacation, I'll get the measurements for you.
 

bbybee

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Rating - 0%
0   0   0
If the measurements are the same for the VMod and VMod XL, would assume they are, it's 11-12mm wide and about 10mm of their drip atty goes into it. When using an extension that is 12-13mm, most attys and tanks sit around 1mm off the top. Of course, would be more if atty had longer 510 connection.
 

Johnny B

Member For 4 Years
Member For 3 Years
Rating - 100%
3   0   0
If the measurements are the same for the VMod and VMod XL, would assume they are, it's 11-12mm wide and about 10mm of their drip atty goes into it. When using an extension that is 12-13mm, most attys and tanks sit around 1mm off the top. Of course, would be more if atty had longer 510 connection.
Thanks for that
 

HiTechRedneck

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Rating - 0%
0   0   0
Johnny, for $70 I'll take it, if comes with all the stuff you listed. PayPal I hope, that way, both our asses are covered.
 
Last edited:
Status
Not open for further replies.

VU Sponsors

Top