. Thanks for sponsoring our contests @WotofoOfficial!
I played my ass off in that last contest and this is what I won:
Yep, that's right ... I won squat!
Only teasin' lol, Nice idea for a thread, I still like to look at the shiney stuff even if I'm not able to participate.
There will be others mate we’ve got challenges locked in up until March and content in development to take us until June at the moment
You'll love the mesh pro. This will be my 4th. Best tank I love ever usedIn WOTSIT Challenge I won EHPro Fusion KIt as well. Haven't tried the RTDA yet but have used the mod. Works well. You can navigate through modes by clicking fire button / without going into a settings menu.
Sponsored by @Heaven Gifts https://www.heavengifts.com/product/Ehpro-Fusion-Kit.html
View attachment 130511
Also won 2 rolls in APIWATW Challenge. Yes ! 2 !!
First is FeeeMax Mesh Pro. I haven't used FreeMax, or mesh anything, and this tank/coils are well regarded for flavor and coil life.
It may replace an emergency sub ohm I keep in the car unless I like it enough to buy it's coils. Huge upgrade to what's in there now.
Thank You again @Heaven Gifts https://www.heavengifts.com/product/Freemax-Mesh-Pro-Tank.html
View attachment 130512
Second is...CoilArt Mage Mech V2. I believe it only comes as a stacked kit, with plenty of extras like, 2nd style button, 2 series contacts, and springs of different tension. Insulated top and battery insulation built in the cylinders. Silver plated contacts. Brass construction with black electroplating(not ceracoat). A review says it's v drop is .53, which apparently is real good. I've never owned a tube mech and being lucky enough to win this only 1, is fantastic, esp since I've been contemplating a dedicated dripper for a while now.
Thanks to @CoilART vapor for sponsoring and the mod.
http://store.coilart.net/coilart-mage-mech-v20
View attachment 130519
Pics of actual prizes when I get them.
Tank, or both? Nifty lookin' set up.
Nice! You really cleaned up this time 'round. Mesh Pro is solid. I think you'll be impressed, atleast a littleIn WOTSIT Challenge I won EHPro Fusion KIt as well. Haven't tried the RTDA yet but have used the mod. Works well. You can navigate through modes by clicking fire button / without going into a settings menu.
Sponsored by @Heaven Gifts https://www.heavengifts.com/product/Ehpro-Fusion-Kit.html
View attachment 130511
Also won 2 rolls in APIWATW Challenge. Yes ! 2 !!
First is FeeeMax Mesh Pro. I haven't used FreeMax, or mesh anything, and this tank/coils are well regarded for flavor and coil life.
It may replace an emergency sub ohm I keep in the car unless I like it enough to buy it's coils. Huge upgrade to what's in there now.
Thank You again @Heaven Gifts https://www.heavengifts.com/product/Freemax-Mesh-Pro-Tank.html
View attachment 130540
Second is...CoilArt Mage Mech V2. I believe it only comes as a stacked kit, with plenty of extras like, 2nd style button, 2 series contacts, and springs of different tension. Insulated top and battery insulation built in the cylinders. Silver plated contacts. Brass construction with black electroplating(not ceracoat). A review says it's v drop is .53, which apparently is real good. I've never owned a tube mech and being lucky enough to win this only 1, is fantastic, esp since I've been contemplating a dedicated dripper for a while now.
Thanks to @CoilART vapor for sponsoring and the mod.
http://store.coilart.net/coilart-mage-mech-v20
View attachment 130519
Pics of actual prizes when I get them.
. I got a pink one and love it. I bought a pack of the triple coils and they really last a long time. Hope ya like your Mage kit as well.
Hope you like it! Looks like a good one.The APIWATW challenge was the first that I've entered. I won the Core RTA and can't wait to try it out. Can't wait to see what's next. Much appreciation and a BIG thank you goes out to all of the sponsors and the challenge team. Can't say it enough. Glad to be a part of this awesome community.
Sent from my SM-S727VL using Tapatalk
It’s the aspire zelos 50w (subohm) Kit..
My prize from the Beater Challenge (#1) was the Wotofo Warrior RDA. I wasn't a big RDA user in the past. But I'm getting into them more and more thanks to this baby.
View attachment 130508
Donated by @CrazyChef v2.0 @ PureCoils.
From Challenge #2 the Wotsit championships is the Ehphro Fusion kit. I haven't tried the atty but the mod works awesome. I call it "The Bus".
View attachment 130509
Sponsored by @Heaven Gifts
Challenge #3 the APITAW challenge I won a Wotofo Serpent Elevate RTA. I'm going to use the heck out of it
You can't win if you don't play! Come get some!
Hope yall enjoyed your holidays to the fullest.
Thank you for participating!Hello Winners,
The product has been shipped out by USPS, we have emailed the tracking number to you, please check your inbox.
Congratulations to you!
Looking forward to your feedback for the product.
Best Wishes
Aspire Team
Thank you! Know the winners will be happy you are all back.Hello Winners,
The product has been shipped out by USPS, we have emailed the tracking number to you, please check your inbox.
Congratulations to you!
Looking forward to your feedback for the product.
Best Wishes
Aspire Team
Hey that's pretty nice
It is! And the light on the button is purple at full charge. You'd love that, lol. It's about the size of a small mech.
That's cool.
Glad to see you got yours Huck. I got the purty black one, complete with purple light too! I am so jealous you got the shiny silver one lol. Have you tried yours out yet?
No, didn't have much chance yet, and I want to look into coils, too. I'm off the next few days, though
I'd say you got one of the best prizes of us all. Well done.
Huck, I wasnt able to try out my Tigon unfortunately. Had a supervisor from anothet department tryin to quit and bought himself an iJoy iJust3 to try out. Needless to say it was too much vapor production for him to handle so I offered my Tigon to give him that much needed MTL that he was lookin for. For the past few days he's been using it religiously and hasnt gone back to smoking.
So while I wasnt able to enjoy my prize, I did get the satisfaction that it went to somebody who could really use it.
Your review of the Tigon hit all the points I would have made about it. Built nicely, drip tips were pretty sweet, and the lockin mechanism was very well thought out. That fill port was too small for anybody usin the fat part of a unicorn bottle. But overall really solid piece of equipment.
@Aspiretina thanks again for bein a sponsor of these challenges. Been lovin yalls products since I first started years ago and cant wait to see what new stuff yall come up with next.
Cant wait to try out the Sahara RDA which is somewhere out there on the way. And still lookin to get the super secret ultra rare prize, assumin Kingpin didnt forget about those prizes lol
@OmagaWright I finally loaded up my Tigon. I started using the stick only, yesterday and was really enjoying that. Been a minute since I've used an internal batt mod, especially one where you can't at least adjust the voltage, but I can totally see me using this. After running errands today, I loaded up the tank with the .4 coil. I checked it on another mod, it ohms out at .6-.7. It feels hotter than that to me, but I'm used to wrapping between .8 to 1.2 with 26g wire, being a MTLer with an airy or restricted DL tank. I normally like a cooler vape, with longer draws.
Results:
Though warmer than I usually would go for, with this coil, the flavor is outstanding!! Great vapor production with this one, too. I can't yet speak as to how soon I'll need to fill it again, but wanted to post this back to you. I have the airflow with the widest slot pretty much all the way open, and that draw is good for me, still drawing like MTL. Even if I use the little holes for the airflow, with setting that to all holes visible, the draw is much to my liking.
I haven't purchased ready to vape coils in a few years, now, but I really can see doing so with this. I love how they load. Push in, close it up. Pretty cool in that.
The only con I've found, thus far, is the fill port. Though it's not difficult to use, unless you're using one of those really skinny tipped dropper bottles, this could be a mess to fill. I think I'd rather the cap just screw off. Not a deal breaker, though.
The drip tip......... LOVE it. I'm using the shorter one and I absolutely LOVE it.
@Aspiretina, thank you very much for sponsoring this contest, and for getting this to me so quickly. I really do enjoy this one. Thumbs up to you and your team on the Tigon.
Thanks, as always, to the Challenge Team, for all your efforts for making such great fun for all of us. You have definitely brought some groups of people together that might not have spent much time chatting before. It's been a great deal of fun for me.
Huck, I wasnt able to try out my Tigon unfortunately. Had a supervisor from anothet department tryin to quit and bought himself an iJoy iJust3 to try out. Needless to say it was too much vapor production for him to handle so I offered my Tigon to give him that much needed MTL that he was lookin for. For the past few days he's been using it religiously and hasnt gone back to smoking.
So while I wasnt able to enjoy my prize, I did get the satisfaction that it went to somebody who could really use it.
Your review of the Tigon hit all the points I would have made about it. Built nicely, drip tips were pretty sweet, and the lockin mechanism was very well thought out. That fill port was too small for anybody usin the fat part of a unicorn bottle. But overall really solid piece of equipment.
@Aspiretina thanks again for bein a sponsor of these challenges. Been lovin yalls products since I first started years ago and cant wait to see what new stuff yall come up with next.
Cant wait to try out the Sahara RDA which is somewhere out there on the way. And still lookin to get the super secret ultra rare prize, assumin Kingpin didnt forget about those prizes lol
I am so lookin forward to hearin your opinions on the Elevate. Hope its comin soon.One more for the books. Wotofo replacement for the prize mixup. Got the Elevate today along with a 30pack of wotofo cotton and another pack of coils
Pmed
Vapefly Core RTA by Wayne, on Flickr
CSVape Sahara RDA by Wayne, on Flickr
Let us know what you think.
The tails found in those factory coils are the key to lettin me do this. And yes that first pic is the gunky old coil, and the second is after I cleaned it and how the cotton got put in.
Core
3CVape Sahara RDA