wanting a regulated box

[Timmy]

i've got a triple parallel 18650 box mod that a local shop puts together but i'm wanting to get a regulated one to have also. any recommendations? i was thinking of the ipv3 but i'm not really sure. was hoping the price might would go down on them. The shop that i got the unregulated mod from is called Steam Roller Vapor Depot. If interested in them you can find them on facebook. He also does 3d printing of sleds and whatever else you may want. and the coil picture is just a 16 gauge build i usually have in my troll. box handles it beautifully with no problems

 

[BoomStick]

My buddy has a Sigelei 150w. It's black with a black silicone sleeve. The looks, feel and performance are great. I'll be getting one when the budget allows and it's what I'd recommend to others looking for a quality 'do it all' mod. Happy hunting.

 

[Zamazam]

I'd go with a Sig 150 or if you have the spare change a NAOS Raptor Chip box mod (some go to 200W). The limitation would be a coil of .2 Ohms. Judging by that 16 Gauge Build, I'd say you are really on the low side of .1. Am I right?

 

[Breazy_Com]

Yep Sigelei seems to be a favorite. Can find good deals on them also.

 

[Timmy]

I'd go with a Sig 150 or if you have the spare change a NAOS Raptor Chip box mod (some go to 200W). The limitation would be a coil of .2 Ohms. Judging by that 16 Gauge Build, I'd say you are really on the low side of .1. Am I right?

the low low side of under .1 ohm.
but thats why i want a regulated so i can build higher and
have power to it. The Beast box mod is a 200w but its just too too expensive.
id love to have one sometime but i'm looking for something affordable

 

[Zamazam]

Go with the Sig 150 then.

 

[steven7010]

Sig 150 or cloupor 150 both are about the same price i have both of them to me there the best reg mods out right now

 

[twisted]

Got the sig 150 and love it. So far has not had a problem yet.

 

[Sir Vapesalot]

Sig 150, love mine

 

[richardward77]

I got the Sig 100 watt plus yesterday and I'm loving it haven't even got it up to 50 watts yet.

 

[Timmy]

I was leaning that way. I may look to see if any new Ones come out soon and then pull the trigger. Was really hoping ipv4 would of been a higher wattage

 

[steven7010]

I was leaning that way. I may look to see if any new Ones come out soon and then pull the trigger. Was really hoping ipv4 would of been a higher wattage

But really i run my cloupor 150 on 80w with a dark horse drip tip and i never go over 90w with .50ohms dual twisted 28 gauge so 100w would be just fine for u but...if u got it u got it 150w ...hahaha