Become a Patron!

What's Your Favorite BF RDA?

DrVapenstein

Bronze Contributor
Member For 5 Years
I own three and plan to add a Coilturd RDA For Vaping and that'll pretty much cover the bases for me.

The ones I have now:

Geekvape Peerless- nice finish and tip, dissipates heat extremely well, BF a little anemic, flavor merely ok, if something better comes along it gets cleaned off and goes back in the box

Twisted Messes Dang!- wow this thing vapes great, airflow options from super restricted DL all the way to airy, flavor is maybe excellent and if not then at least certainly great, flawless BF, and being mostly ultem it runs super cool

Vaperz Cloud Asgard Mini- haven't used it yet, bought it as an excuse to buy an SQ217

let's hear your thoughts on what you use!
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Been single-coil small chamber obsessed for a couple of years now

Love the No Fear Again by No Name - it's what I vape most

However, Odis 16, Hadaly, Flave 22 and the good old Goon 22 still rate, as does the Phenom by Haku and good old Nuppins

But, I all but quit buying gear over a year ago, so nothing new in my rotation in a long time

I just revisit what I already have, lol
 

dubya314

Platinum Contributor
Member For 5 Years
For single coil, Ghoul and Recurve for me. Can't find a single complaint about either. For dual coil, tons I like just fine, none that really pop into my mind.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
My favorite is the Profile mesh.
I have one on just about every Squonk mod I own.

Sent from a Galaxy far far away
I was just thinking the og profile mesh has got to be in the top 3 for me. Put one back together Friday night and forgot how much flavor there is. Next to those two for me was the Haku Phenom and the Le Supersonic. Flave 24mm comes in right behind the supersonic
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Difficult to pin a favorite. I've an affinity of single coil ones. Here's what I'm using.

3 Oumier Wasp Nano RDA
1 Advken Gorge
1 Kennedy

Got maybe 2 Goon needing fixed up a third Goon 150 or what not. Then, got 2 old Velocity v2. These aren't used much now. Doing good with the Gorge, Wasp, Kennedy. :)
 

Just Frank

Platinum Contributor
Member For 5 Years
Single coil- Wotofo Elder Dragon
Dual coil- Hellvape Passage
Mesh- Yachtvape Mesh Lock

Favorite- Elder Dragon by a long shot. I get the most fantastic flavor from mine. I've only been using RDAs since the beginning of 2019 so I don't have the most vast collection. I've bought quite a few though in that time. None quite do it for me the way the Dragons do.
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Kennedy is my favorite direct lung rda. Squonk or drip, doesn’t matter.

It does very well for me. :) Only have it on a vindicator mod clone/styled mod. Don't mind dripping. Imagine it would be excellent as a BF.
 

BoomStick

Gold Contributor
Member For 5 Years
The Kennedy is a twin, double barrel shotgun hot rod vape. The airflow is wonderfully designed and tuned. The cap blindly and beautifully snaps in place. It is dead simple, runs like hell and is masterfully built. I love it.
 
The Elder Dragon, Reload S, Entheon and Wasp Nano are excellent single coil atties.

The Recurve vapes nice as well, but because it has no juicewell even compared to the tiny Wasp, you have to squonk constantly.
 

Don29palms

Silver Contributor
Member For 3 Years
ECF Refugee
Unlisted Vendor
TM24 PRO, Reckoning, Redemption, Vital. I really like the Armageddon Mfg. RDAs.
 

Hype

Bronze Contributor
Member For 4 Years
Loving my GR 1's , my Roughneck , and my Widow maker , I have no clue why , they just work for me without any bullshit and are STUPID simple to build . Life is better when I make it simpler .
 

ben73

Gold Contributor
Member For 4 Years
Favourite BF RDAs
One I'm using most is
1/ Fev bf 1, flash e vapor
2/ Le Concorde vapornaute
3/ Pelso V3 KHW mods- this one is great can do dual coil single coil in multiple positions, MTL /DTL/ R-DTL
4/ Mulciber Tiberian Vapes.

Sent from my HD1903 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
if I had to pick one and only one Hadaly :) actually psyclone full stop just vapes exactly how I like it and enjoyed every single one Mac has bought out (single coil wise)

Hadaly,
Flave22,
Jazz,
Venom,
Citadel,
Entheon (Hadeon cap though),
Elder Dragon,
Recurve,
Profile
Soul S


Really wanted to try the skyfall but it’s rarer than rocking horseshit to even get in the group ...so meh over it now

haku venna is on my list but never got round to getting it either

Armor engine is right sitting pretty top of my wish list atm
 
Last edited:

~Don~

Platinum Contributor
Member For 5 Years
if I had to pick one and only one Hadaly :) actually psyclone full stop just vapes exactly how I like it and enjoyed every single one Mac has bought out (single coil wise)

Hadaly,
Flave22,
Jazz,
Venom,
Citadel,
Entheon (Hadeon cap though),
Elder Dragon,
Recurve,
Profile
Soul S


Really wanted to try the skyfall but it’s rarer than rocking horseshit to even get in the group ...so meh over it now

haku venna is on my list but never got round to getting it either

Armor engine is right sitting pretty top of my wish list atm

I can probably send an invite to their group for you... pretty sure I’m in most minus NarMods...

Yup I’m in that group

308d7550b4af21ddd3084419c79cb337.jpg



Sent from my iPhone using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I can probably send an invite to their group for you... pretty sure I’m in most minus NarMods...

Yup I’m in that group

308d7550b4af21ddd3084419c79cb337.jpg



Sent from my iPhone using Tapatalk

sweet thank you I’ll send you PM Don :cheers:
 

wildgypsy70

“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Hadlay/Citadel
Elder Dragon
Drop Solo
Asmodus C4

I don’t do a lot of dual coil vaping. :)
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Advken Gorge
Oumier Wasp Nano

Both of the above authentic.

Trinity U.S. 1 clone
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Agree with @Just Frank that the Yachtvape Meshlock is a wonderful mesh squonking RDA. Have three of them now!
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Asgard Mini
Reload S
Asmodus C4
 

Master Rahl

Bronze Contributor
Member For 3 Years
Until yesterday I would have said the profile mesh rda however: I bought a rebirth and haven't even thought about using my profile since. Far superior flavor easy build deck great airflow design. Hands down my new favorite rda.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
Asgard Mini
Profile
Goon

Sent from a Galaxy far far away
 

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
My squonking is minimal but when I do it is on my Pulse with Apocalypse rda. This is a good combo thick flavorful clouds with almost any coil .1 - .3 ohms. Now when I had my Vt Inbox (RIP). I used my Wasp Nano with a .25ish parallel 26agw coil at 35 watts. It was an amazing vape experience. Does anyone have an Inbox cheap or willing to trade for? That is bottom feed experience. Oh wait I have a Innokin liftbox and I use a Blitz Gouhl on it. I rarely use it as there is a learning curve with the siphon system.
 

Syythe

Silver Contributor
Member For 4 Years
ECF Refugee
My squonking is minimal but when I do it is on my Pulse with Apocalypse rda. This is a good combo thick flavorful clouds with almost any coil .1 - .3 ohms. Now when I had my Vt Inbox (RIP). I used my Wasp Nano with a .25ish parallel 26agw coil at 35 watts. It was an amazing vape experience. Does anyone have an Inbox cheap or willing to trade for? That is bottom feed experience. Oh wait I have a Innokin liftbox and I use a Blitz Gouhl on it. I rarely use it as there is a learning curve with the siphon system.
I had to use a really restricted RDA to get the Liftbox to work well. I have a Berserker V2 on mine. I have seen someone use a GR1 with the airflow cut almost all the way off on it, they said it worked well too. Any direct lung amount of airflow didn't work for me, I had to shut the airflow every few hits and take a primer puff or two to get the juice to flow, or I would get dry hits. It works great for MTL though.
 

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
I had to use a really restricted RDA to get the Liftbox to work well. I have a Berserker V2 on mine. I have seen someone use a GR1 with the airflow cut almost all the way off on it, they said it worked well too. Any direct lung amount of airflow didn't work for me, I had to shut the airflow every few hits and take a primer puff or two to get the juice to flow, or I would get dry hits. It works great for MTL though.
The finish on mine sucks. The finish is bubbled and peeling. I think it is because juice was sitting on those areas. I put it away and maybe I did not wipe it down well. Idk when I took it out the trouble spots were much worse. It is a cool looking mod. Maybe I can creatively refinish it. I like the Tim Burton #9 characters. Just an idea. Well Merry Christmas and Happy New Year.
Rick
 

VU Sponsors

Top