Become a Patron!

Which mods can handle resistance below 0.1 ohms

OhmzRaw

Silver Contributor
Member For 4 Years
I'm looking to get a new regulated mod that can handle my low builds (0.09/0.08) coils. Other than the DNA, which other mods can handle these builds.

PS: I know battery safety as I've been vaping for around 4 years. I know these builds are dangerous. The reason for my question is that I love my alien coils and fused claptons but the resistance often times is too low (0.09) and most mods won't fire these builds.
 

OhmzRaw

Silver Contributor
Member For 4 Years
I've seen those, the Hohmwrecker G2 has really got my attention. Do you guys think a parallel mech mod would be a better purchase?
 

Vapomizer

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Wouldn't a parallel mech get too hot at these resistance levels?
 

OhmzRaw

Silver Contributor
Member For 4 Years
Wouldn't a parallel mech get too hot at these resistance levels?
Or maybe even a series. I don't plan to use it as an All day device. I'm gonna use it mostly just for cloud comps. I wouldn't mine the Hohmwrecker G2 but I don't think they ship to my country.
 

Vapomizer

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Actually i just checked, ALL Joyetech/Wismec/Eleaf products fire down to 0.05ohm in TC mode and 0.1ohm in VW mode

Here is an example:

Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode

http://www.wismec.com/product/reuleaux-rx200s/
 

scarecrowjenkins

Silver Contributor
Member For 4 Years
Unlisted Vendor
Do NOT put anything like that on a series box !!! (as above suggested)
accb46391fccd59a52bbb6338226e085.jpg

That'll put you at 80+ amps and over 700W!

However, with good reliable (true 30 amp) batteries it's perfectly fine on a parallel mech box. I would invest in a triple parallel box if you consistently vape below .10Ω
44b056a56097c49360587fb0dc2d4d8f.jpg


Also-any DNA 200 device should let you fire down to .05Ω

Here's @Mooch's battery chart. VERY helpful when determining safe limits on all your batteries
ec13d79fff451e62cb89c2195c9566ca.jpg

Good luck!!
 

OhmzRaw

Silver Contributor
Member For 4 Years
Do NOT put anything like that on a series box !!! (as above suggested)
accb46391fccd59a52bbb6338226e085.jpg

That'll put you at 80+ amps and over 700W!

However, with good reliable (true 30 amp) batteries it's perfectly fine on a parallel mech box. I would invest in a triple parallel box if you consistently vape below .10Ω
44b056a56097c49360587fb0dc2d4d8f.jpg


Also-any DNA 200 device should let you fire down to .05Ω

Here's @Mooch's battery chart. VERY helpful when determining safe limits on all your batteries
ec13d79fff451e62cb89c2195c9566ca.jpg

Good luck!!
Thanks for that info, I'll definitely be checking out a triple parallel mech
 

Vapomizer

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Here is a triple regulated that could go up to 300W but is only capable of a minimum of 0.1ohm in VW just like the rest, probably not good for what you intend to use it for, just letting you know that it exists.

http://www.smoktech.com/mod/koopor-primus

a triple Mech is a fantastic idea though unless you are willing to build 0.11ohm or 0.12ohm, would that be a lot of difference in cloud production?
 

OhmzRaw

Silver Contributor
Member For 4 Years
Here is a triple regulated that could go up to 300W but is only capable of a minimum of 0.1ohm in VW just like the rest, probably not good for what you intend to use it for, just letting you know that it exists.

http://www.smoktech.com/mod/koopor-primus

a triple Mech is a fantastic idea though unless you are willing to build 0.11ohm or 0.12ohm, would that be a lot of difference in cloud production?
I did see the Hohmwrecker G2 which says it can handle a minimum resistance of 0.007 ohms and has a max output wattage of 151w. This mod did capture my attention but I though maybe a mech will be better suited for this.
 

Vapomizer

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I did see the Hohmwrecker G2 which says it can handle a minimum resistance of 0.007 ohms and has a max output wattage of 151w. This mod did capture my attention but I though maybe a mech will be better suited for this.
Yeah, since you want this for going crazy with clouds on special occasions, a mech is probably the right tool for the job, a regulated device is meant for consistent everyday normal vaping, a mech will also cost much less, but a Hohm Wrecker G2 or a DNA200 device can still do the Job. depends on your needs.
 

Grego

Bronze Contributor
Member For 4 Years
Reddit Exile
The uwell Rafael rda can bring the resistance up due to the center neutral post. Just a thought
 

Mythical_OD

Gold Contributor
Member For 4 Years
Or maybe even a series. I don't plan to use it as an All day device. I'm gonna use it mostly just for cloud comps. I wouldn't mine the Hohmwrecker G2 but I don't think they ship to my country.

If you are going to put a 0.1 ohm set up on a series mod, then get a Hammer of God V2 clone, which is paraseries. It fires at series voltage (7.5+ volts) but also is run parallel so you have that extra amperage head room. Good mod all around for a hot series build.

Whats your country? A lot of places sell the hohm Wrecker G2 and Im sure at least 1 of them has to ship to where you are.
 
F

fckaugust8th

Guest
I'll vote for the G2 as well. One of my current builds is 0.11 ohms in an Alleria RTA and I have no problems in TC or Power modes. To me at least, it feels like the G2 fires hotter than any other mod I own. Depending on where you're at, you could get a new G2 for about $75. I just updated one of the G2s and now it goes up to 171 Watts.
 

Mythical_OD

Gold Contributor
Member For 4 Years
Oh and also, the Hohm Wrecker G2 is one of the only regulated mods on the market (possibly the only regulated mod) that will fire down as low as 0.007 (i believe thats the number). Not many mods out there will fire below a 0.1 in power mode,
 

OhmzRaw

Silver Contributor
Member For 4 Years
I'll vote for the G2 as well. One of my current builds is 0.11 ohms in an Alleria RTA and I have no problems in TC or Power modes. To me at least, it feels like the G2 fires hotter than any other mod I own. Depending on where you're at, you could get a new G2 for about $75. I just updated one of the G2s and now it goes up to 171 Watts.
Where did you get yours from? I wanna get one.
 

Rhett1977

Bronze Contributor
Member For 4 Years
The Hohm Slice will too. Just like the Hohm Wrecker. Same chip. FSK- flag ship killer
 

Rhett1977

Bronze Contributor
Member For 4 Years
Are these guys reliable? Just saw "black market" and got a little sceptical

Yes they are. I've bought 2 from them. Hohmtech had them on their website listed as a vendor for their products. They're great to work with. Excellent customer service. I had mistakenly hit will call for shipping instead of shipping and I sent them an email at 8pm. 9:15am next morning I get a call. Mr. Spillmon what's wrong? How can we fix it? I was like WOW!!! Actual customer service. They're great to do business with and have my business forever now.
 

OhmzRaw

Silver Contributor
Member For 4 Years
Yes they are. I've bought 2 from them. Hohmtech had them on their website listed as a vendor for their products. They're great to work with. Excellent customer service. I had mistakenly hit will call for shipping instead of shipping and I sent them an email at 8pm. 9:15am next morning I get a call. Mr. Spillmon what's wrong? How can we fix it? I was like WOW!!! Actual customer service. They're great to do business with and have my business forever now.
Looks like I'll be ordering one from them however I doubt they'll ship to my country (south africa) I did pop them an email. Really excited to get this mod. The feautures it has is just amazing and the reviews say that it hits harder than any other mod need one of these in my life. Another option for me would've been the hohmslice but at $75 for the G2 it's pretty hard to beat that deal. I'm not so much into aesthetics. For me it's all about quality and how a mod performs.
 

Rhett1977

Bronze Contributor
Member For 4 Years
Looks like I'll be ordering one from them however I doubt they'll ship to my country (south africa) I did pop them an email. Really excited to get this mod. The feautures it has is just amazing and the reviews say that it hits harder than any other mod need one of these in my life. Another option for me would've been the hohmslice but at $75 for the G2 it's pretty hard to beat that deal. I'm not so much into aesthetics. For me it's all about quality and how a mod performs.

I own the Wrecker G2 and the Slice both. It came in today and I gotta say if you don't vape over 101 watts get the SLICE!!!!!! It is fuckin sweet as hell. It fits better in your hand, it's not all boxy shaped like the G2 (the only thing I don't like about the G2. They should have at least rounded off the edges because they're really sharp and the box is pretty deep in the hand.); the Slice hits just as hard, has all the same features as the G2. The FSK chip and all. A few have said their fire button sticks. Mine hasn't. I press the button then release, I don't slide my finger on the fire button. I'd bet that's what's happening to these guys. I bought the limited edition Slice for my wife. I Vaped on it for 15 mins and ordered me one. I usually vape at 150-171 on my G2 but the slice will be super nice for carrying around. I am amazed at this little box. It's a little heavy for its size and uses 26650 batteries but other than that it's sweeeeeeeet!!!! Just my $.02
 

OhmzRaw

Silver Contributor
Member For 4 Years
I own the Wrecker G2 and the Slice both. It came in today and I gotta say if you don't vape over 101 watts get the SLICE!!!!!! It is fuckin sweet as hell. It fits better in your hand, it's not all boxy shaped like the G2 (the only thing I don't like about the G2. They should have at least rounded off the edges because they're really sharp and the box is pretty deep in the hand.); the Slice hits just as hard, has all the same features as the G2. The FSK chip and all. A few have said their fire button sticks. Mine hasn't. I press the button then release, I don't slide my finger on the fire button. I'd bet that's what's happening to these guys. I bought the limited edition Slice for my wife. I Vaped on it for 15 mins and ordered me one. I usually vape at 150-171 on my G2 but the slice will be super nice for carrying around. I am amazed at this little box. It's a little heavy for its size and uses 26650 batteries but other than that it's sweeeeeeeet!!!! Just my $.02
Where did your hohmslice from and at what price? Might just get both if finances allow
 

Rhett1977

Bronze Contributor
Member For 4 Years
Where did your hohmslice from and at what price? Might just get both if finances allow

I got mine from cloudy spot.com for $69 free shipping. They have since sold out it everything but black and silver. No limited editions. You can get the limited editions from here for the same price though. http://www.vaporcube.com/h-slice-ho...ature-control-box-mod-le-limited-edition.html

They're great to work with as well. The regular editor is $10 cheaper. It has a 1 amp slower onboard charger which is no big deal. I just like limited editions. If I could only buy one I'd get the Slice. I've bought 3 total. One for my wife, one for me, and one for backup!!!
 

PaulS

Gold Contributor
Member For 5 Years
Strangely the Hugo Vapor 160w does. I'm using it with my Tug at .09 - it goes down to .05 or some such in power mode. I also have the Athena Hero which handles them fine down to .05 also. I have some real screwy mods, lol.
 

OhmzRaw

Silver Contributor
Member For 4 Years
I got mine from cloudy spot.com for $69 free shipping. They have since sold out it everything but black and silver. No limited editions. You can get the limited editions from here for the same price though. http://www.vaporcube.com/h-slice-ho...ature-control-box-mod-le-limited-edition.html

They're great to work with as well. The regular editor is $10 cheaper. It has a 1 amp slower onboard charger which is no big deal. I just like limited editions. If I could only buy one I'd get the Slice. I've bought 3 total. One for my wife, one for me, and one for backup!!!
I emailed blackmvrket, just waiting for a reply regarding shipping.
 

VU Sponsors

Top