Wow, what the actual F just happened-Fire in TC inhale.

[conanthewarrior]

I will add one thing on the temp control as handled by the x cube...

I'm not a big fan of not selecting power in tcm. Yes there's 5 settings... but hardly enough given the range of coils that get built. Ramp is very different between 32 and 24 ga. Only coil that I've had that didn't hit over temp in a single rip, is a .08 single of 24 ga. Ni200 I guess technically it works... but i much prefer the tc on my sigelei. It's much smoother @ temp.

Sent from my SM-N910P using Tapatalk

The Sigelei 150TC does handle TC much smoother-it is my only device I own that comes close to the DNA 200 in TC mode. Then it goes IPV D2, Sig 75, and finally the Xcube 2. My other mods are standard power boxes and mechs, so I only have those until my DNA200 is back.

I think it may be due to the Yihi chips that the smoothest devices are my Sig 150 and the D2, just a tad less than the DNA200. The D2 is a cracking mod, one that I use almost daily to take out with me, ultra small, stealthy, good TC, and good quality yet cheap.

 

[Wingsfan0310]

I'm not sure what the Li stands for. Would have been less confusing if it was just V2 instead of Li lol.

The chip is: Yihi SX330-V3SL. It's engraved right on the front cover under the IPV3 Li engraving.

Cheers,
Steve

Edit The touch sensor works fine. I've never had it go off unless I touched it. Another thing is, for safety, it won't work (even when enabled) once the screen times out/goes dark. As you know, you can completely disable it if you don't want to use it

 

[conanthewarrior]

I'm not sure what the Li stands for. Would have been less confusing if it was just V2 instead of Li lol.

The chip is: Yihi SX330-V3SL. It's engraved right on the front cover under the IPV3 Li engraving.

Cheers,
Steve

Ahh thanks mate. A good quality chip then - I am sold. It's about 60 quid over here, so not this saturday but next that will be the ultra likely candidate, I can get the Evic vt mini at a later date-I will likely give it to Cheyenne to use anyway to see if she likes TC. If not, It's another mod for the collection .

 

[Wingsfan0310]

I edited my post above yours mate with the screen sensor information you asked about. Might have done it after you read it so I'm just giving you a heads up.

Cheers,
Steve

 

[Kleinman]

Reminds me when I tried testing a build(Dual parallel coils at 85 watts .15ohms) and this happened. I was able to duplicate it to show some buddies.
View My Video