Become a Patron!

Squonkers are Bonkers

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I can't take the oder - even after drying isopropyl leaves an aroma that I find objectionable
Takes about 24 hours to totally go away.
You were never a nurse I take it?

If the odor is not a problem it cleans much better than vodka. Vodka is at least 50% water.
 

ben73

Gold Contributor
Member For 4 Years
For a little over $3 you can get a repair kit that includes a 510 pin.
Ive got a few already have had aleast 5 spares bags for around 11mths,
But as posted on CV BF Thread a while ago ,
the bf mod pin to bottles snaps on head , and has done with a few people , Its just a weak point on the pin , just over top of insulator ,
Thanks any ways

Sent from my ONEPLUS A3003 using Tapatalk
 
Last edited:

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
The old kits did , I thibk before they swapped over to V2 switch model

Sent from my ONEPLUS A3003 using Tapatalk
I dunno I got V1 kits and they had no buttons just some orings and such for the atty. And an extra bottle as I recall?
I know they are V1 because that is the kit that works with them.
 

raineysky

Bronze Contributor
Member For 4 Years
Where did you see it delayed? FT still shows it with a 10/25 ETA

3FVape

The product is delayed by the manufacturer, from the latest information, it will be shipped around November 15, 2017. We will try to get it delivered as soon as we can. Please Note: This product will be shipped around October 20, 2017 (ETA, not guaranteed). The final shipping date depends on the manufacturer. We will try to get it delivered as soon as we can.
 

ben73

Gold Contributor
Member For 4 Years
I dunno I got V1 kits and they had no buttons just some orings and such for the atty. And an extra bottle as I recall?
I know they are V1 because that is the kit that works with them.
The original mod kit with the older RDA , had them as a spares bag I believe,
I know they changed the button and the RDA last year sometime , think might be a mention about it near start of Orignal Coppervapes BF Sqounker kit Forum , but been a while since i posted on there or read the 100+ pages way back when ,

Sent from my ONEPLUS A3003 using Tapatalk
 

raineysky

Bronze Contributor
Member For 4 Years
jasonandsarah

Can you print these door panels fro the Hcigar VT75 Inbox? They have a file on Thingiverse

b94e646431ee61316ad6123c4e03c74c_preview_featured.jpg
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I used isopropyl to clean the messy contacts on the DB160; worked great; once dried, no smell -- it's the freaking bottom of the mod, no way would the smell be a problem from that distance -- and this from the bionic-beagle nose. :D

Andria
 

snake94115

Diamond Contributor
Member For 4 Years

raineysky

Bronze Contributor
Member For 4 Years
Vaping on the Hadaly clone with a little taller drip tip and it made the cut. It's the only clone to survive although the YFTK Entheon is on the way. I'm culling out the herd to make room for more. Thinking hard about the Pulse 24. It checks a lot of boxes versus my three Peerless, Icon, Tsunami, and others that probably won't see the light of day again.

Not searching for the Holy Grail but chasing the end of the Rainbow is fun :)
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Everything wears out and needs repair kits.
Take myself for instance....

True, entropy wears everything down. I'm a bit odd. Can know and accept something, yet still not like it. I can also know other things running counter to what it is I'm needing to accept. Take the post below for example. It offers me a bit of a solution as stainless offers better resistance to oxidation. I know it'll wear out eventually. That eventuality's goal posts get pushed further along by using the solution, gives better durability. Better durability gives us better value for like some frugal tight asses we might know. :)

I forget which size it is,but someone figured out a while back that a Fat Daddy squonk pin will work as a 510 pin in the cv.I think it is the 2.5mm that they said worked,just have to grind or file the head down some.
Edit-I just pulled mine apart to check,and it is the 2.5mm pins that fit.You have to grind quite a bit of the head off to make it correct,but well worth the effort,as you will now have a nice stainless 510 pin instead of that whatever cheap metal they use,i think they use plated brass in the original pin.

Ah ha. Knew it would come back around if it had been around before. Keeping up with various threads, forums can at times find a person missing, or only half seeing something. :) I had read something about I thought, the long needles of the needle tip bottles going up through the 510 pin. Stepped away before seeing all of it, lost the thread.

Do see how a FD 510 would work. Also can see needing to file it a bit. I can manage that. Had to file out the holes on the ChiNarda. Still didn't completely fix the whistling. Did figure out, don't use the inner air holes, turn the cap sideways and get no whistle. :)

That'll work, danka, gracious, thank you, spaceba. I'll now need to see if I got a few 2.5mm FD pins left over, if not I'll order some a bit later. At least now I know and that's half of it. :)
 

Wicked Gene

Silver Contributor
Member For 4 Years
Spent all day detailing my Cruiser and completey didn't notice the postman drop off some vapemail... I forgot I even ordered this
25f980a32e7cdba204bd73d926bf942e.jpg

Ran it thru a quick wash and put one of the fused Claptons that came with it and it's about .33 ohms.
7791907d4ecefd8704f219f3269dafbf.jpg

Through it on the ole trusty TD 26650 and it vapes beautifully.
@raineysky
9e77c52bcac85fa37fc20a482b10fae8.jpg
you like the colors?
Anyway here's a pic of my effort at detailing today
e4d227e6e6d2271a51c0f941515612f7.jpg

Hope you bonkers had a great Saturday and GO Dawgs!



Sent from planet Krypton
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Spent all day detailing my Cruiser and completey didn't notice the postman drop off some vapemail... I forgot I even ordered this
25f980a32e7cdba204bd73d926bf942e.jpg

Ran it thru a quick wash and put one of the fused Claptons that came with it and it's about .33 ohms.
7791907d4ecefd8704f219f3269dafbf.jpg

Through it on the ole trusty TD 26650 and it vapes beautifully.
@raineysky
9e77c52bcac85fa37fc20a482b10fae8.jpg
you like the colors?
Anyway here's a pic of my effort at detailing today
e4d227e6e6d2271a51c0f941515612f7.jpg

Hope you bonkers had a great Saturday and GO Dawgs!



Sent from planet Krypton
Honestly I was gonna say by your Avatar it was a motorcycle. But still a nice vehicle and great detail.

Sent from my Nexus 6P using Tapatalk
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Better durability gives us better value for like some frugal tight asses we might know. :)

Hey now, I resemble that remark. The frugal part, anyway; my ass has been loose for 30 yrs. Gravity's a bitch!

Andria
 

VU Sponsors

Top