syedmuneebsardar
Member For 2 Years
I am using ss316l 26guage 0.43ohm i get no flavour from obs engine rta
Sent from my SM-G955F using Tapatalk
Sent from my SM-G955F using Tapatalk
They r close cotton is lose not too tightAre the coils close enough to airflow?? & how much cotton have you used
And your inner diameter? For example my current dual build is ss 3mm 7 wrap spaced coils.I use 8wraps ss316l 26guage
Sent from my SM-G955F using Tapatalk
Mine is 3mm i sent u private message can you check pleaseAnd your inner diameter? For example my current dual build is ss 3mm 7 wrap spaced coils.
Welcome to VU.
PM is not showing on my end yet. I'll check again in a bit. You simply need to start tweaking. Only change one element at a time or you won't know what worked. Tedious but well worth the effort. Try rewicking first.Mine is 3mm i sent u private message can you check please
Sent from my SM-G955F using Tapatalk
Ss316lIf its a plain wire build. It won't give flavour that say a clapton wire will give but I'm sure letitia will help you out
You know enough to help to! I rarely use dual builds anymore.If its a plain wire build. It won't give flavour that say a clapton wire will give but I'm sure letitia will help you out
I know but there's not much you can say really. It's usually just a case of looking at wicking cos if wicking is wrong it can give dry hits or no flavour. And although I use dual coil RTA'S I don't have this one. It's the single coil obs I ownYou know enough to help to! I rarely use dual builds anymore.
I should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problemI know but there's not much you can say really. It's usually just a case of looking at wicking cos if wicking is wrong it can give dry hits or no flavour. And although I use dual coil RTA'S I don't have this one. It's the single coil obs I own
He meant single wire coils vs multi wire or exotic coils. You'll get the terminology down soon. When asking for help you need to post details. Pics come in handy too. What kind of cotton are you using; pads, muji, balls, etc?Ss316l
Sent from my SM-G955F using Tapatalk
Yeah maybe im new to rta thats why.PM is not showing on my end yet. I'll check again in a bit. You simply need to start tweaking. Only change one element at a time or you won't know hat worked. Tedious but well worth the effort. Try rewicking first.
.43Ω is sub ohm.I should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problem
Sent from my SM-G955F using Tapatalk
No means gt4 coil by vaperesso it has nice flavour i am using revenger x. I bought it 2months ago bexause i want to leave smoking. But i cant afford pre made coils all time.43Ω is sub ohm.
Can you send me message in private chat so i learn from u little bit about rta.43Ω is sub ohm.
Aha thanks for helpAnything below 1.0 is sub ohm & leaking is usually down to wicking btw. If an RTA is wicked incorrectly it will leak
This is how i m buildinf is this fine?Anything below 1.0 is sub ohm & leaking is usually down to wicking btw. If an RTA is wicked incorrectly it will leak
No. Where is the other coil? Do not leave a leg unclipped.This is how i m buildinf is this fine?
Sent from my SM-G955F using Tapatalk
Yeah i will cut leg jst building it i will showNo. Where is the other coil? Do not leave a leg unclipped.
CheckNo. Where is the other coil? Do not leave a leg unclipped.
Make the top of the coils even with the top of the posts, and lay the cotton atop the wick holes plugging them but not filling them upI should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problem
Sent from my SM-G955F using Tapatalk
Thank you!Your wire is all that goes in my Nanos.
View attachment 105988
You get a lot of love around here and across the street.Thank you!
Sent from my SM-N950U using Tapatalk
my i got very little flavour dont knowThank you!
Sent from my SM-N950U using Tapatalk
I will tryMake the top of the coils even with the top of the posts, and lay the cotton atop the wick holes plugging them but not filling them up
Sent from my SM-N950U using Tapatalk
Your wire is the best thing that's improved flavor for me in all my RTAs. After buying your sampler, I still haven't decided which is my fav!Thank you!
Sent from my SM-N950U using Tapatalk
Patience, every rta is different and sometimes it takes a while to find what works for you.my i got very little flavour dont know
Sent from my SM-G955F using Tapatalk
YeahPatience, every rta is different and sometimes it takes a while to find what works for you.
CN you share your build what wire u r usingMy first build was the most flavorless thing ever. Don't give up
3.0 fused clapton dual coil 26g dual coil comes out at 0.15 ohms in my reload or in my berserker 2.5 28g 0.5 ohms.CN you share your build what wire u r using
Sent from my SM-G955F using Tapatalk
Nice3.0 fused clapton dual coil 26g dual coil comes out at 0.15 ohms in my reload or in my berserker 2.5 28g 0.5 ohms.
The reload is at 70 watts and the berserker at 20 watts. I do both sub ohm and MTL.
It's all about iteration. When I get a new rta I'll build on it over and over and over again to try to optimize coil placement and wicking. It's worth the extra time just be patient with it.my i got very little flavour dont know
Sent from my SM-G955F using Tapatalk
Okay thank u for helpIt's all about iteration. When I get a new rta I'll build on it over and over and over again to try to optimize coil placement and wicking. It's worth the extra time just be patient with it.
Sent from my SM-N950U using Tapatalk
PM me if you need any helpNice
Sent from my SM-G955F using Tapatalk
Sure tyPM me if you need any help
No one has mentioned dry burning ss. That doesn't explain why he's getting no flavorDry burning ss is different that some other wires. What I do at first is keep the wattage low enough to only get color change(no orange) when pulsed and working out hot spots that you can see with said color change. Then I'll bump the wattage up a bit till I see a liitle glow, just to confirm spots are not there.
Nice tutorialDry burning ss is different that some other wires. What I do at first is keep the wattage low enough to only get color change(no orange) when pulsed and working out hot spots that you can see with said color change. Then I'll bump the wattage up a bit till I see a liitle glow, just to confirm spots are not there.
Everything else has basically been touched on besides that, so there ya go.No one has mentioned dry burning ss. That doesn't explain why he's getting no flavor
Thanks! Well, thanks AVSNice tutorial
Sent from my SM-G955F using Tapatalk
You'd be surprised how many times that's a culprit. Coil positioning and wicking are always the prime suspects but there's a lot of people that over fire ss and never experience it at it's peak because of thatNo one has mentioned dry burning ss. That doesn't explain why he's getting no flavor