Obs engine rta dual coil

[syedmuneebsardar]

I am using ss316l 26guage 0.43ohm i get no flavour from obs engine rta

Sent from my SM-G955F using Tapatalk

 

[SkoldVape]

Are the coils close enough to airflow?? & how much cotton have you used

 

[Letitia9]

Size and number of wraps please.

 

[syedmuneebsardar]

I use 8wraps ss316l 26guage

Sent from my SM-G955F using Tapatalk

 

[syedmuneebsardar]

Are the coils close enough to airflow?? & how much cotton have you used

They r close cotton is lose not too tight

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

I use 8wraps ss316l 26guage

Sent from my SM-G955F using Tapatalk

And your inner diameter? For example my current dual build is ss 3mm 7 wrap spaced coils.
Welcome to VU.

 

[syedmuneebsardar]

And your inner diameter? For example my current dual build is ss 3mm 7 wrap spaced coils.
Welcome to VU.

Mine is 3mm i sent u private message can you check please

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

Mine is 3mm i sent u private message can you check please

Sent from my SM-G955F using Tapatalk

PM is not showing on my end yet. I'll check again in a bit. You simply need to start tweaking. Only change one element at a time or you won't know what worked. Tedious but well worth the effort. Try rewicking first.

 

[SkoldVape]

If its a plain wire build. It won't give flavour that say a clapton wire will give but I'm sure letitia will help you out

 

[syedmuneebsardar]

If its a plain wire build. It won't give flavour that say a clapton wire will give but I'm sure letitia will help you out

Ss316l

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

If its a plain wire build. It won't give flavour that say a clapton wire will give but I'm sure letitia will help you out

You know enough to help to! I rarely use dual builds anymore.

 

[SkoldVape]

It'll take a bit of tweaking as she says. When I first get an RTA I always experiment and it's usually the tiniest thing you need to do

 

[SkoldVape]

You know enough to help to! I rarely use dual builds anymore.

I know but there's not much you can say really. It's usually just a case of looking at wicking cos if wicking is wrong it can give dry hits or no flavour. And although I use dual coil RTA'S I don't have this one. It's the single coil obs I own

 

[syedmuneebsardar]

I know but there's not much you can say really. It's usually just a case of looking at wicking cos if wicking is wrong it can give dry hits or no flavour. And although I use dual coil RTA'S I don't have this one. It's the single coil obs I own

I should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problem

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

Ss316l

Sent from my SM-G955F using Tapatalk

He meant single wire coils vs multi wire or exotic coils. You'll get the terminology down soon. When asking for help you need to post details. Pics come in handy too. What kind of cotton are you using; pads, muji, balls, etc?

 

[syedmuneebsardar]

PM is not showing on my end yet. I'll check again in a bit. You simply need to start tweaking. Only change one element at a time or you won't know hat worked. Tedious but well worth the effort. Try rewicking first.

Yeah maybe im new to rta thats why.

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

I should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problem

Sent from my SM-G955F using Tapatalk

.43Ω is sub ohm.

 

[syedmuneebsardar]

.43Ω is sub ohm.

No means gt4 coil by vaperesso it has nice flavour i am using revenger x. I bought it 2months ago bexause i want to leave smoking. But i cant afford pre made coils all time

Sent from my SM-G955F using Tapatalk

 

[syedmuneebsardar]

.43Ω is sub ohm.

Can you send me message in private chat so i learn from u little bit about rta

Sent from my SM-G955F using Tapatalk

 

[SkoldVape]

Anything below 1.0 is sub ohm & leaking is usually down to wicking btw. If an RTA is wicked incorrectly it will leak

 

[syedmuneebsardar]

Anything below 1.0 is sub ohm & leaking is usually down to wicking btw. If an RTA is wicked incorrectly it will leak

Aha thanks for help

Sent from my SM-G955F using Tapatalk

 

[syedmuneebsardar]

Anything below 1.0 is sub ohm & leaking is usually down to wicking btw. If an RTA is wicked incorrectly it will leak

This is how i m buildinf is this fine?

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

This is how i m buildinf is this fine?

Sent from my SM-G955F using Tapatalk

No. Where is the other coil? Do not leave a leg unclipped.

 

[syedmuneebsardar]

No. Where is the other coil? Do not leave a leg unclipped.

Yeah i will cut leg jst building it i will show

Sent from my SM-G955F using Tapatalk

 

[syedmuneebsardar]

No. Where is the other coil? Do not leave a leg unclipped.

Check

Sent from my SM-G955F using Tapatalk

 

[Letitia9]

If you're getting a good equal even glow wick it up and go from there. May take a few builds to find your sweet spot.

 

[St.Roostifer]

Might want to give this video a look. FF to the 20minute mark where he shows his coil placement and explains why he does this. The way he builds allows the air to come down around the outside of each coil then under and up between them to the chimney. Worth a look.

 

[advancedvapesupply]

I should go with sub ohm :/ i bought two gemini rta and obs engine rta dual coil one. Gemini gives flavour but leaking problem

Sent from my SM-G955F using Tapatalk

Make the top of the coils even with the top of the posts, and lay the cotton atop the wick holes plugging them but not filling them up

Sent from my SM-N950U using Tapatalk

 

[Letitia9]

Make the top of the coils even with the top of the posts, and lay the cotton atop the wick holes plugging them but not filling them up

Sent from my SM-N950U using Tapatalk

Your wire is all that goes in my Nanos.

 

[advancedvapesupply]

Your wire is all that goes in my Nanos.
View attachment 105988

Thank you!

Sent from my SM-N950U using Tapatalk

 

[Letitia9]

Thank you!

Sent from my SM-N950U using Tapatalk

You get a lot of love around here and across the street.

 

[syedmuneebsardar]

Thank you!

Sent from my SM-N950U using Tapatalk

my i got very little flavour dont know

Sent from my SM-G955F using Tapatalk

 

[syedmuneebsardar]

Make the top of the coils even with the top of the posts, and lay the cotton atop the wick holes plugging them but not filling them up

Sent from my SM-N950U using Tapatalk

I will try

Sent from my SM-G955F using Tapatalk

 

[sbankme]

Thank you!

Sent from my SM-N950U using Tapatalk

Your wire is the best thing that's improved flavor for me in all my RTAs. After buying your sampler, I still haven't decided which is my fav!

 

[Letitia9]

my i got very little flavour dont know

Sent from my SM-G955F using Tapatalk

Patience, every rta is different and sometimes it takes a while to find what works for you.

 

[syedmuneebsardar]

Patience, every rta is different and sometimes it takes a while to find what works for you.

Yeah

Sent from my SM-G955F using Tapatalk

 

[SkoldVape]

My first build was the most flavorless thing ever. Don't give up

 

[syedmuneebsardar]

My first build was the most flavorless thing ever. Don't give up

CN you share your build what wire u r using

Sent from my SM-G955F using Tapatalk

 

[SkoldVape]

CN you share your build what wire u r using

Sent from my SM-G955F using Tapatalk

3.0 fused clapton dual coil 26g dual coil comes out at 0.15 ohms in my reload or in my berserker 2.5 28g 0.5 ohms.
The reload is at 70 watts and the berserker at 20 watts. I do both sub ohm and MTL.

 

[syedmuneebsardar]

3.0 fused clapton dual coil 26g dual coil comes out at 0.15 ohms in my reload or in my berserker 2.5 28g 0.5 ohms.
The reload is at 70 watts and the berserker at 20 watts. I do both sub ohm and MTL.

Nice

Sent from my SM-G955F using Tapatalk

 

[advancedvapesupply]

my i got very little flavour dont know

Sent from my SM-G955F using Tapatalk

It's all about iteration. When I get a new rta I'll build on it over and over and over again to try to optimize coil placement and wicking. It's worth the extra time just be patient with it.

Sent from my SM-N950U using Tapatalk

 

[syedmuneebsardar]

It's all about iteration. When I get a new rta I'll build on it over and over and over again to try to optimize coil placement and wicking. It's worth the extra time just be patient with it.

Sent from my SM-N950U using Tapatalk

Okay thank u for help

Sent from my SM-G955F using Tapatalk

 

[SkoldVape]

Nice

Sent from my SM-G955F using Tapatalk

PM me if you need any help

 

[syedmuneebsardar]

PM me if you need any help

Sure ty

Sent from my SM-G955F using Tapatalk

 

[Vape Fan]

Dry burning ss is different that some other wires. What I do at first is keep the wattage low enough to only get color change(no orange) when pulsed and working out hot spots that you can see with said color change. Then I'll bump the wattage up a bit till I see a liitle glow, just to confirm spots are not there and if dual, the glow is even.

 

[SkoldVape]

Dry burning ss is different that some other wires. What I do at first is keep the wattage low enough to only get color change(no orange) when pulsed and working out hot spots that you can see with said color change. Then I'll bump the wattage up a bit till I see a liitle glow, just to confirm spots are not there.

No one has mentioned dry burning ss. That doesn't explain why he's getting no flavor

 

[syedmuneebsardar]

Dry burning ss is different that some other wires. What I do at first is keep the wattage low enough to only get color change(no orange) when pulsed and working out hot spots that you can see with said color change. Then I'll bump the wattage up a bit till I see a liitle glow, just to confirm spots are not there.

Nice tutorial

Sent from my SM-G955F using Tapatalk

 

[Vape Fan]

No one has mentioned dry burning ss. That doesn't explain why he's getting no flavor

Everything else has basically been touched on besides that, so there ya go.
I'll be sure to first pm you too, just to make sure what I post is relevant.

 

[Vape Fan]

Nice tutorial

Sent from my SM-G955F using Tapatalk

Thanks! Well, thanks AVS

 

[advancedvapesupply]

No one has mentioned dry burning ss. That doesn't explain why he's getting no flavor

You'd be surprised how many times that's a culprit. Coil positioning and wicking are always the prime suspects but there's a lot of people that over fire ss and never experience it at it's peak because of that

Sent from my SM-N950U using Tapatalk