Thats really low...imoHey im new to this i just ordered Kylin mini and GeekVape N80 ( 30*3+38 AWG) Fused Clapton wire 4-5 wraps would give me 0.6ohms,will the kylin run good on 0.6ohms?It may sound stupid but im pretty new to this so i wanna know.
Thanks.
Which wire are you using?Kylin mini is single..is your calc set to single or dual coil? My mini is .37 and its a beast
Sent from my SM-G950U using Tapatalk
N80 cores ss fuse and flat...i make my own though. U have a vape calc?Which wire are you using?
Yeah steam engine but 30*3+38 AWG confuses me so i dont know how to use it,i feel dumb by saying this..N80 cores ss fuse and flat...i make my own though. U have a vape calc?
Sent from my SM-G950U using Tapatalk
Well i was told by a friend that hes getting 0.6ohms with 4-5 wraps i did not calculate anything,can i still make good build with this wire?or i have to order new one?atm i have GeekVape N80 Fused Clapton,im just waiting for the kylin mini to come.Sonethings wrong with your build..heres vape calcs result using your specs
Sent from my SM-G950U using Tapatalk
Ok...yes...itll be fine now...PHEWWWWWWLol sorry about that seems like i mistyped (i fkin hate my fat fingers lol),soo the kylin mini will be okay when vaping with 0.6ohm coil right?
Steam engine wire wizard can be pretty straight forward.Yeah steam engine but 30*3+38 AWG confuses me so i dont know how to use it,i feel dumb by saying this..
btw will the ikuun to the job with the kylin also?
Thanks for the wicking guide,im pretty optimistic that i will do the wicking fine from 1 try watched like 100 guides ,will update this topic when my kylin arrives.Steam engine wire wizard can be pretty straight forward.
You have 3 cores and a wrap.
Wire Builder:
Set to clapton, which is also used for alien.
Core:
You have more that 1 so setting this to parallel allows for 2 cores and then click the + to add 1.
Wires:
Set the type and size for your cores and wrap.
At top left of page under Coil Setup---
-For Kylin MIni I use 3id and find that's the sweet spot for me, for mounting and the amount of wick. I think that's a good place to start with this particular atty. 4mm leg length is good. 5 is a little high and 3 is too short. Then you can see how many wraps for the resistance you want. Hover your mouse over the 'wraps' field and it will tell you that for legs pointing in the same direction (as in the Mini) use 1/2 wraps.
5.5 wraps is a good length for the AF. If they are spaced a little that's ok too. And at bout .5Ω your 4600Mah mod will most likely last the day.
View attachment 129955
https://www.steam-engine.org/wirewiz.html
Wicking KM can be a toughy to learn. There's a fine line between great flavor, leaking, and dry hits. Stay with it and you'll be rewarded with it's performance. There's more than 1 way to wick it and here's a good place to start.
Vandy Vape Kylin Mini RTA Review by KingPin! (inc. wicking guide)
Have a look at your manual for mod specs. The atomizer doesn't care what coil you put in it. Firing it is all about the mod.
(Resistance range: 0.05-1.5ohm (TC modes)-------0.1-3.5ohm (VW mode) )
The Official Steam Engine Thread is a great place to get to know Steam Engine