SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
lol censorship at it's finestI posted the comparison on steamcrave Facebook page it got deleted lol!!!
Become a Patron!
30mm SUPREME RDTA/RDA PLUS
- Thread starter ej1024
- Start date
Lmfao.
That's it...
I think I said
Top cap comparison of the
Ap vs MF
Boom I'm banned!! Hahaha fuckem
If anyone is getting dry hits with high VG juice you need to remove the deck and make sure there isn't any cotton sticking thru the bottom. I pushed my cotton up some so it's flush with the bottom and it's perfect now. 100w pull after pull, perfect!
I like this tank better with a single coil....odd but true.
Its a shitty design, im with ya, but to combat the shitty design just dont tighten it up much, snug is all you need to prevent leaks and it wont get stuck.
They making diffrent top caps now , diffrent knurlin on them an the clear orings , these do not get stuck I've had one shipped out too me an it works great
plus my second order has it already installed , so no more sticking
At least steam crave fixes the problems
Sends out fixes / parts for existing customers unlike the Sherman RTA whom Tom ignores the Customer who have had problems hoping they just go away
Sent from my ONEPLUS A3003 using Tapatalk
This is old one , with crossed Knurling ,
new version come with more dot like Knurling on top cap , with clear Orings on the part under drip tip and top cap ,
Here ...on the tank now is new version .
Mine no longer sticks , an works well ,
Sent from my ONEPLUS A3003 using Tapatalk
Mine was stuck together earlier today, had to strip it down and put pliers in the juice ports from underneath to seperate them. Which was a) annoying and b) nearly made me break the glass trying to grip it.
Yes i had that a few weeks ago after about 10th time i did use pliers an broke a tank , which Steam Crave replaced , after posting on fan page ect , So i got Replacement parts that fixed it all ,
Sent from my ONEPLUS A3003 using Tapatalk
Yeah that is one complaint i have with the Supreme, that top cap is a bitch to get off sometimes. I just dont tighten it down to much. Just snug....They should've made that top cap thicker.. PERIOD!!
that is ridic, vendors should not block people from social media for complaints/suggestions. only if being rude or maybe aggressive/cursing.... oh wait, was it the vendors page or some rando group?They blocked me for the same shit I said...
I dont have an issue with the top cap for filling, my issue is the next level down if I want to break down the dang thing for cleaning or to swap to 5ml, or 20ml sizes.
My other issue I have is the 510. In order to make and keep a good contact with my mod I have to back out the positive screw. But it keeps getting screwed back in. so to solve that i cut down a driptip orings and tucked that into the 510 inside the insulator and then put the screw back in. Going on two days and it is still working good.
My other issue I have is the 510. In order to make and keep a good contact with my mod I have to back out the positive screw. But it keeps getting screwed back in. so to solve that i cut down a driptip orings and tucked that into the 510 inside the insulator and then put the screw back in. Going on two days and it is still working good.
I got mine replaced due to threads , being not too good , the new one has different Knurling an works fine not once has it stuck since ,
I think steam Crave has now on new release changed all to the newer version
Sent from my ONEPLUS A3003 using Tapatalk
Ive got a tank here thats a push down an turn spring loaded top cap works well , tester prototype so cant show but might be going into production later this year for a new release ,
Can we see some pictures of the new knurling on the top cap? Just curious..
Yes page back i posted pictures of new on tank old at side top post on last page an on my rta on pics above too , its smaller dots on top of tank
Sent from my ONEPLUS A3003 using Tapatalk
Gotcha, i see they made the knurling different but the thickness of topcap is the same. How does that make it easier ?? Not trying to be a bug, just honestly curious.
Threading Orings changed its all posted further back , i not doing duplicate postings
Sent from my ONEPLUS A3003 using Tapatalk
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Been using and enjoying one of these things for a while, but now that I have a 40mm Dumptank RTA I may never touch it again. Be a shame, it had some damned nice flavor in the low profile tank mode with the smallest glass. The RDA mode kind of sucks though.
Just got this in tonight, was waiting on my HOG v3 to get in to put a build in. But damn, might pop a build in and Vape it on the Big Pig, overhang really isn't that bad, not bad at all.
Build quality is absolutely superb, just superb!
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
What is that?
Nevermind, 40mm MF. Looks nice, I may get one but I doubt it would win over the Dumptank for me. I'm sure the build quality on that is better, but the DP has a slightly larger deck, a better deck (my opinion) and far more airflow which suits my ungodly large titan coils that I vape at nearly 300W. Still, I will admit I was bummed when I couldn't order one due to them being OOS.
Nevermind, 40mm MF. Looks nice, I may get one but I doubt it would win over the Dumptank for me. I'm sure the build quality on that is better, but the DP has a slightly larger deck, a better deck (my opinion) and far more airflow which suits my ungodly large titan coils that I vape at nearly 300W. Still, I will admit I was bummed when I couldn't order one due to them being OOS.
Last edited:
I have no idea. Someone from another forum sent me a set of 2x24/3x32ss staggered clapton @ 0.08 ohm (didnt count the wraps) to test if they would fire on my rx2/3 that are supposed to go down to 0.05 in TC mode and it wouldn't fire. Put it on my new Hohm Wrecker G2 and that thing (in a goon rda clone) gives a great vape in normal SS TC mode 110w/420f. Time to try it on the Max Insanity and Vape Porn modes I think next.
Must have this 30mm Beauty! Just ordered from Subtank Supply. Hope it doesn't take too long to get to me.
CV
P.S. Might have to get the RX300 to power this bad boy.
CV
P.S. Might have to get the RX300 to power this bad boy.
Ok. I now have this tank and all I can say is WOW! I put dual 4mm ID Fused claptons in it (26ga N80 x 2 with 36ga Kanthal wrap) 6 wraps each coming in at around 0.28ohms. I am using it in 10ml capacity mode at 90 watts and OMG the flavor and clouds are both OUTSTANDING!! Really glad I made the purchase. I think this one is going to be BIG!! (Pun Intended!)
Happy Vaping All!
CV
Happy Vaping All!
CV
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Ok. I now have this tank and all I can say is WOW! I put dual 4mm ID Fused claptons in it (26ga N80 x 2 with 36ga Kanthal wrap) 6 wraps each coming in at around 0.28ohms. I am using it in 10ml capacity mode at 90 watts and OMG the flavor and clouds are both OUTSTANDING!! Really glad I made the purchase. I think this one is going to be BIG!! (Pun Intended!)
Happy Vaping All!
CV
I could barely fit 3mm 6 wrap fused clapton (26x2 /w 36, same as your coils) coils in it, how the hell did you manage 4mm ones?
I don't know. I just coiled them up, tightened them and stuck them in. It is an amazing vape. I have to say though, I can literally see my batteries draining! LOL!! I think I am going to need one of those 4 battery mods here soon for this beast!
CV
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
I don't know. I just coiled them up, tightened them and stuck them in. It is an amazing vape. I have to say though, I can literally see my batteries draining! LOL!! I think I am going to need one of those 4 battery mods here soon for this beast!
CV
I vape 40mm devices at 250W, I've been depending on 3S and 4S setups for ages.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
It fits some massive coils
Sent from my SM-G935V using Tapatalk
It was less an issue with the coils and more an issue with the massive amount of cotton that comes with 4mm coils, I find when cotton is trimmed down a lot it wicks a bit spotty and stuffing the well tight will lead to dry hits. I chain vape in a literal sense, at a high wattage too, I need the most on point wicking possible so that may be the difference between it. If someone doesn't need super fast wicking, they could use bigger coils and by extension more cotton without it fucking up their vape.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Cut your cotton leads on an angle. Same way florist trim rose stems
Sent from my SM-G935V using Tapatalk
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Cut your cotton leads on an angle. Same way florist trim rose stems
Sent from my SM-G935V using Tapatalk
I do, it's the massive volume loss on a 4mm wick trim from the Supreme Plus and it slows down the wicking just enough to disrupt my vape. So 3mm was what I went with.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Ah gotcha. I never had an issue personally but I understand what u mean
Sent from my SM-G935V using Tapatalk
Hello Again Everyone. Here is a quick video I made (well maybe not really quick) to show and tell the Aromamizer Plus. This tank is sweet!
Happy Vaping!
CV
Happy Vaping!
CV
I build 4mm and 5mm coils. wick with koh gen doh and comb the tails a little. never have issues with dry hits. Wicking has no issues keeping up. dual fused claptons 6 wraps @.23ohms on a 3s PWM mod set to 6.5 volts. I think I ran teh math and that was around 180 watts or some shit.
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Take pictures of 5mm (26x2 with 34) 6 wrap fused claptons fitting in a Supreme and I'll believe you. 4mm I can see, 5mm I cannot.
I'm vaping 4.2mm 12 wrap triple twisted 22 gauge (yes, it's thick.) with 36ga claptoned around it in the grooves in my 40mm Mason Dumptank and they're maxing out the 30mm deck nearly. I can't see 5mm 6 wrap fused claptons of 26x2 w/ 34 type fitting in the Supreme Plus and its 19mmish deck, the Mason DT has a 30mm deck and I could see 5mm 6 wrap fused claptons like that being a good build for it at around 250W+, but on a smaller deck I can't.
ok. I will. Because Im SOOOO worried about you believing me...
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
All I needed to hear.
Yeah 5mm coils are big but you have to remember the supreme plus deck is postless so you have more room over a deck with posts. Not saying they fit or they dont fit. I only put 3.5mm coils in my supreme plus. Just a thought...