With pod devices becoming the new ‘in-thing’ and gaining a lot of popularity in 2018, it was about time Renova Vapor came up with their very own pod device to compete amongst the thousands of other pod devices in the market. For those of you that don’t know, Renova Vapor is a division of the popular vape manufacturer, Vaporesso - A company that needs no introduction.
Vaporesso has gained a lot of popularity in 2018 and are responsible for producing some of the best starter kits at affordable price tags. Their Armour Pro mod is still one of my favourite single cell mods to date. Today I will be reviewing their latest pod device called the ZERO.
Design:
The Renova ZERO features a similar design to Vaporesso’s first pod device, the Nexus AIO. This is a very sleek, flat designed device that is pretty small and convenient to carry around. The ZERO is a simple All-In-One device that requires almost ‘ZERO’ effort from the user. Being a pod device, the only thing you need to do is refill, charge and change out the pods. Vaporesso made use of a 'draw activation' system for this device as well which is a nice touch towards making this device extremely simple and user friendly.
Starting at the mouth piece, the ZERO has a duck-bill shaped mouthpiece which to me feels more comfortable than other mouthpiece designs. The width of the mouth piece as well as it’s symmetrical design makes it very comfortable to use. The pod lacks adjustable airflow options which is fine for a pod device as it’s catered mainly for MTL and High Nicotine e-liquids. The ZERO has a loose MTL draw. It feels looser than the draw of a cigarette but it’s still a MTL vape. Personally, I think it has the perfect amount of restriction to it.
The pod is secured by strong magnets holding it in place. When secured, the pod won’t be going anywhere or falling out. You can pick up the device from the pod and even shake it without the pod coming off. According to Vaporesso, the pod for the ZERO is constructed from PCTG (Poly - Cyclohexylenedimethylene Terephthalate Glycol). Don’t let the long name scare you because PCTG is one of the better plastic materials out there. PCTG has excellent toughness and good heat resistance at ~120˚C. It is also food safe as granted by the FDA, and so will not emit BPA. PCTG also has great transparency and therefore seeing your juice levels isn’t very difficult provided you are not in the dark.
The pod makes use of Vaporesso’s popular CCell Ceramic coil heads which is a massive plus. The use of ceramic coil heads makes the flavour the ZERO produces that much better. I would gladly say that the CCell coils seem to give better flavour than other coils used by other devices. I think every manufacturer should consider offering a ceramic option for their tanks or pod devices.
Looking at the device itself, it has a really nice and smooth finish. Underneath this beauty lies a 650mAh battery which is a decent capacity to expect from a pod device. Depending on the colour option you settle for, you might get a different finish. The Rainbow colour option has a metal construction as is quite the fingerprint magnet although it looks really good. The other colour options such as the Arctic Blue however, have a matte finish which doesn’t hold any fingerprints and is a more practical option for those that can’t stand fingerprints on a mod. It would’ve been a nice touch if the Rainbow option had some sort of clear coat on it to prevent fingerprints from getting onto the device.
On the side of the device you have a little branding. I had no issues with peeling of paint or anything like that on my device even with heavy usage.
Towards the bottom of the device you have a single adjustment button which is also the LED indicator which let’s you know more or less how much battery life you have left. This LED lights up each time you take a puff and changes colour depending on your battery life situation.
Battery light indicator:
Green – High (Above 70%)
Blue - Medium (30-70% Battery life)
Red – Low (Below 30% life remaining)
In addition to being a battery life indicator, this LED Button can also be used to Switch the device On/Off and can also be used to change the power output.
Operation:
To Switch the device On/Off – 5 Click of the button
To Switch between power modes – 3 Click of the Button
Power Modes to choose from:
Green – High (12.5w)
Blue – Medium (10.5w)
Red – Low (9w)
To view what mode you’re in, simply hold down the LED Button.
Beneath the device is the USB charging port which is capable of charging this device at 1A – a pretty fast charging speed. According to Vaporesso, this device should charge from 0-100% in 45 minutes which is quite impressive.
Vaporesso has gained a lot of popularity in 2018 and are responsible for producing some of the best starter kits at affordable price tags. Their Armour Pro mod is still one of my favourite single cell mods to date. Today I will be reviewing their latest pod device called the ZERO.
Manufacturers Specs:
- Dimensions – 31mm (Length) by 13.5mm (Breadth) by 80.2mm (Height)
- All-In-One Pod System
- Intelligent OMNI Board Mini
- 2mL Juice Capacity – PCTG (Food safe & BPA Free) Refillable Pod
- Integrated 650mAh Rechargeable Battery
- Wattage Output Range: 9-12.5W
- Minimum Resistance: 1.0ohm
- Auto Temperature Control
- Low Liquid Detection
- Direct Voltage Based Output
- ON/OFF Button
- Colourful LED Light Battery Indicator
- Press-to-Fill (PTF) Mechanism
- Vaporesso CCELL Coil Technology
- 1A Micro USB Charging Port
- Short Circuit Protection
- No Load Protection
- Low Resistance Protection
- Overtime Protection
- Overcharge Protection
- ESD Circuit Protection
- Pass-Through Protection
- Available in Black, White, Silver, Rainbow, Orange, Arctic Blue, Red, Green, Blue
Included in box:
- 1 x ZERO Pod System (650mAh)
- 1 x PCTG Refillable Pod
- 1 x 10mL E-Juice Filling Bottle
- 1 x USB Charging Cable
- 1 x User Guide
- 1 Warranty Card
Design:
The Renova ZERO features a similar design to Vaporesso’s first pod device, the Nexus AIO. This is a very sleek, flat designed device that is pretty small and convenient to carry around. The ZERO is a simple All-In-One device that requires almost ‘ZERO’ effort from the user. Being a pod device, the only thing you need to do is refill, charge and change out the pods. Vaporesso made use of a 'draw activation' system for this device as well which is a nice touch towards making this device extremely simple and user friendly.
Starting at the mouth piece, the ZERO has a duck-bill shaped mouthpiece which to me feels more comfortable than other mouthpiece designs. The width of the mouth piece as well as it’s symmetrical design makes it very comfortable to use. The pod lacks adjustable airflow options which is fine for a pod device as it’s catered mainly for MTL and High Nicotine e-liquids. The ZERO has a loose MTL draw. It feels looser than the draw of a cigarette but it’s still a MTL vape. Personally, I think it has the perfect amount of restriction to it.
The pod is secured by strong magnets holding it in place. When secured, the pod won’t be going anywhere or falling out. You can pick up the device from the pod and even shake it without the pod coming off. According to Vaporesso, the pod for the ZERO is constructed from PCTG (Poly - Cyclohexylenedimethylene Terephthalate Glycol). Don’t let the long name scare you because PCTG is one of the better plastic materials out there. PCTG has excellent toughness and good heat resistance at ~120˚C. It is also food safe as granted by the FDA, and so will not emit BPA. PCTG also has great transparency and therefore seeing your juice levels isn’t very difficult provided you are not in the dark.
The pod makes use of Vaporesso’s popular CCell Ceramic coil heads which is a massive plus. The use of ceramic coil heads makes the flavour the ZERO produces that much better. I would gladly say that the CCell coils seem to give better flavour than other coils used by other devices. I think every manufacturer should consider offering a ceramic option for their tanks or pod devices.
Looking at the device itself, it has a really nice and smooth finish. Underneath this beauty lies a 650mAh battery which is a decent capacity to expect from a pod device. Depending on the colour option you settle for, you might get a different finish. The Rainbow colour option has a metal construction as is quite the fingerprint magnet although it looks really good. The other colour options such as the Arctic Blue however, have a matte finish which doesn’t hold any fingerprints and is a more practical option for those that can’t stand fingerprints on a mod. It would’ve been a nice touch if the Rainbow option had some sort of clear coat on it to prevent fingerprints from getting onto the device.
On the side of the device you have a little branding. I had no issues with peeling of paint or anything like that on my device even with heavy usage.
Towards the bottom of the device you have a single adjustment button which is also the LED indicator which let’s you know more or less how much battery life you have left. This LED lights up each time you take a puff and changes colour depending on your battery life situation.
Battery light indicator:
Green – High (Above 70%)
Blue - Medium (30-70% Battery life)
Red – Low (Below 30% life remaining)
In addition to being a battery life indicator, this LED Button can also be used to Switch the device On/Off and can also be used to change the power output.
Operation:
To Switch the device On/Off – 5 Click of the button
To Switch between power modes – 3 Click of the Button
Power Modes to choose from:
Green – High (12.5w)
Blue – Medium (10.5w)
Red – Low (9w)
To view what mode you’re in, simply hold down the LED Button.
Beneath the device is the USB charging port which is capable of charging this device at 1A – a pretty fast charging speed. According to Vaporesso, this device should charge from 0-100% in 45 minutes which is quite impressive.