Hey guys, I got both of these products and neither of them work..here's what happend.
Lemo1: My best friend and I both bought this product together. His worked fine for a long time, untill recently it started to leak for him, then he bought Lemo2 (which I bought together with him aswell). For me this thing, didnt work at all, basically after I filled it, there was no air coming out, only a wicked sick hard throat hit, made me cough and shed tears instantly. As I took it apart and tried to smoke it without the top cap and tank, (only the atomizer metal tank) it was okay, good taste and everything, but as soon as I assembled it, there was no vape at all. Tried adjusting the air hole, but nothing happend, recoiled, rewick, same thing. Its collecting dust ever since, no idea what to do with it..so I went back to my shity boge 510 cartomizers..
Lemo2: After my friend's lemo1 started leaking, we both bought this. His product as usual was working fine, mine didnt. After a few days, his lemo2 started tasting burnt, told him to close the air hole, open the fill hole, hold down the mouthpiece, close the fill hole, release the mouthpiece, then the liquid rushed into the wick/coil part, so for him its fixed and all good..
Now here's what happend to me. As soon as I got it, took it apart, put some liquid on the wick/coil, assemble it, fill it, everything is fine, tastes good, but it leaks on the bottom of the glass tube. I cleaned it with a paper and let it stand vertically on the table, I did vape the entire tank, took it apart, filled it again, this time I filled horizontally (first time I tried vertically, with air hole closed) as the manual shows, air hole closed, and it leaked all over my table. I took it apart, and I see that there is no o-ring on the bottom...ok, I have 2 in the box, the bigger o-ring fits good, I put the liquid on the wick again, assemble, and I try to open the fill hole..nope..I can't, the whole top cap comes right off but the fill hole doesnt move at all. So I take the top cap off, try to open it, with alot of force and paper in my hands it does open, but when I assemble it again, cannot open it, however I can close it...then I said, its still ok, I cant take it apart every time I fill it and it will be alright.. but this is not the case because right after I fill it and close the fill hole, I notice that the vape starts getting burnt, after about 4-5-6 puffs (vaping at only 12watts 0.5ohm eleaf stick 50w battery). I start watching the tank, after these 4-6 puffs I see bubbles forming very slowly, need about 3-4 minutes before I can smoke it again, basically the liquid does no go into the wick part, just like my friend's lemo, but if he resolved it because he can open the fill hole and I can't..
Its really frustrating that I have both of these, every review says they are awesome and here I am unable to do shit with them..
Please reply if you have any idea how to fix this.
thanks for reading all of this
Lemo1: My best friend and I both bought this product together. His worked fine for a long time, untill recently it started to leak for him, then he bought Lemo2 (which I bought together with him aswell). For me this thing, didnt work at all, basically after I filled it, there was no air coming out, only a wicked sick hard throat hit, made me cough and shed tears instantly. As I took it apart and tried to smoke it without the top cap and tank, (only the atomizer metal tank) it was okay, good taste and everything, but as soon as I assembled it, there was no vape at all. Tried adjusting the air hole, but nothing happend, recoiled, rewick, same thing. Its collecting dust ever since, no idea what to do with it..so I went back to my shity boge 510 cartomizers..
Lemo2: After my friend's lemo1 started leaking, we both bought this. His product as usual was working fine, mine didnt. After a few days, his lemo2 started tasting burnt, told him to close the air hole, open the fill hole, hold down the mouthpiece, close the fill hole, release the mouthpiece, then the liquid rushed into the wick/coil part, so for him its fixed and all good..
Now here's what happend to me. As soon as I got it, took it apart, put some liquid on the wick/coil, assemble it, fill it, everything is fine, tastes good, but it leaks on the bottom of the glass tube. I cleaned it with a paper and let it stand vertically on the table, I did vape the entire tank, took it apart, filled it again, this time I filled horizontally (first time I tried vertically, with air hole closed) as the manual shows, air hole closed, and it leaked all over my table. I took it apart, and I see that there is no o-ring on the bottom...ok, I have 2 in the box, the bigger o-ring fits good, I put the liquid on the wick again, assemble, and I try to open the fill hole..nope..I can't, the whole top cap comes right off but the fill hole doesnt move at all. So I take the top cap off, try to open it, with alot of force and paper in my hands it does open, but when I assemble it again, cannot open it, however I can close it...then I said, its still ok, I cant take it apart every time I fill it and it will be alright.. but this is not the case because right after I fill it and close the fill hole, I notice that the vape starts getting burnt, after about 4-5-6 puffs (vaping at only 12watts 0.5ohm eleaf stick 50w battery). I start watching the tank, after these 4-6 puffs I see bubbles forming very slowly, need about 3-4 minutes before I can smoke it again, basically the liquid does no go into the wick part, just like my friend's lemo, but if he resolved it because he can open the fill hole and I can't..
Its really frustrating that I have both of these, every review says they are awesome and here I am unable to do shit with them..
Please reply if you have any idea how to fix this.
thanks for reading all of this