I bought an Aegis X with a Cerberus Tank yesterday and everytime i try to puff/hit it, it makes a gurgle sound and the smoke heats up really fast and basically no smoke even comes out. Am i doing somethint wrong?
First of all if you have smoke coming out of your mod you're in trouble. We vape and there should only be vapor coming out.I bought an Aegis X with a Cerberus Tank yesterday and everytime i try to puff/hit it, it makes a gurgle sound and the smoke heats up really fast and basically no smoke even comes out. Am i doing somethint wrong?
I have it set at 55First of all if you have smoke coming out of your mod you're in trouble. We vape and there should only be vapor coming out.
What wattage do you have your mod set at?
It sounds like the coil is flooded. Hit the fire button and blow into the drip tip hard for about 3 seconds, repeat if necessary. That should unflood the tank. Flooding can happen when you fill it, try closing the airflow next time you are going to fill it, then open the airflow once the cap is back on.I have it set at 55
Still not a lot of vapor comes out and it still heats up and makes a gurgling soundIt sounds like the coil is flooded. Hit the fire button and blow into the drip tip hard for about 3 seconds, repeat if necessary. That should unflood the tank. Flooding can happen when you fill it, try closing the airflow next time you are going to fill it, then open the airflow once the cap is back on.
Its a super mesh coil that has 0.2I'll need to know what coil you're using. The .3 ohm mesh is recommended for use at 30-45 watts so I'd start at 30 and see how that vape is
I do get a bit of spit back yes. So the tank isnt sealed properly then? The pulls are about 3 to 5 seconds and i have tries different wattagesIt should be heating up and some minor gurgling can be normal. Do you get spit back? Spit back is gurgling that causes hot juice to pop up into your mouth.
If you have a flooded tank and blowing into it doesn't fix the problem I'd guess there's an issue with how the tank is sealed.
Can you give more details on what's happening. How long are your pulls, have you tried different wattages?
Lastly I'd prime another coil and try that, it's not uncommon to get defective coils in a pack
It's either not sealing properly, or it's the coil. I'd take it apart, check the O-rings and put it back together nice and snug. If that doesn't work change your coil.I do get a bit of spit back yes. So the tank isnt sealed properly then? The pulls are about 3 to 5 seconds and i have tries different wattages
Its been like this since i got itIt's either not sealing properly, or it's the coil. I'd take it apart, check the O-rings and put it back together nice and snug. If that doesn't work change your coil.
Lastly I'd ask when things changed, that's usually q good indication of what's wrong. You said you got this set up yesterday, was it vaping fine then? Did things change after a tank fill?
Do you have another coil to try?Its been like this since i got it
Yeah. How do you take the coil rn off. Does it just unscrew?Do you have another coil to try?
Agreed, I haven't used a sub ohm tank in forever, but that's the tank that came with my Legend a year ago and I did use it a few times.I am not a big user of factory tanks and coils. But that is 1 of my go to factory set ups when needed.
New MemberAgreed, I haven't used a sub ohm tank in forever, but that's the tank that came with my Legend a year ago and I did use it a few times.
It unscrews from the base, turn to the left. It's tight from the factory, you might need a damp cloth for extra grip.So in trying to take the old coil out and it doesnt unscrew ir anything. How do i take it out
Wdym the base. It doesnt even turnIt unscrews from the base, turn to the left. It's tight from the factory, you might need a damp cloth for extra grip.
They take it out in the video I suggested above.
I already screwed the new one on but theres another one attatched to the top fill chimneyHere's the breakdown of your tank. The coil is very tight from the factory but does unscrew as depicted in the pic below
View attachment 150712
That will unscrew tooI already screwed the new one on but theres another one attatched to the top fill chimney
Its not unscrewingThat will unscrew too
I got it to unscrew and put everythinf back together, primed it and its working perfectly nowThat will unscrew too
im curious, What was your first setup?I should have kept reading. I didn't realize you had it going already
I was recalling my first setup and you're doing better than I did. Believe me LOL!