Hi. I have looked on the site a lot and found lots useful.
So I decided to join to ask something I couldn't quite find in a search.
I'll give as much info a possible so someone can help as best they can.
.. I have an Ijoy RDTA 200W Box Mod
.. Batteries - Dual Samsung 30q and dual Sony VTC5's so no problem with power, amps and volts etc as I never go above 120 watts but that's rare)
I usually vape between 80 and 100 watts in VW mode that is
.. Now. For the troubling issue I think I'm having.
I recently decided to switch to SS dual coils. To preserve battery life and put less strain on my mod.
.. I'm using 316L premade Clapton's and Aliens at 0.25 ohms (0.14 dual) which is what I'm at.
I understand i can us them in VW mode at around 40-60 watts. But am going towards TC mode and using the SS setting.
I'm at 250°c and 35-50 watts
Air hole fully open
However, I am getting spitting from the coils at 40watts after just a few seconds. ( unless I hit it hard and really suck on it haha )
The flavour is good and the lack of heat is a nice change from what I was at.
I want to know if I am around the right limits as spitting can be caused by not enough watts. But when I go higher. Around 50-70 watts. It spits more and faster. So I'm kind of in a bit of head mess with it all.
Wicking is fine. Not too much and its not flooded. Cotton bacon v2
I'm just at a loss with if I'm at the right place with TC in terms of watts and temperature.
The last add on is that while vaping the temperature is set to 250°c but never goes past 150°c when firing
Am I doing something else wrong I don't know about?
Any help would be great.
Summary.
TC MODE
35-50 watts at 250°c but won't go past 150°c when firing ( same at 50-70 watts)
0.14 dual Clapton's and alien coils
The only thing I'm really confused about is why its not passing 150°c when I'm setting it to 250°c
And I think I'm at the right place with wattage so I'm really confused haha
So I decided to join to ask something I couldn't quite find in a search.
I'll give as much info a possible so someone can help as best they can.
.. I have an Ijoy RDTA 200W Box Mod
.. Batteries - Dual Samsung 30q and dual Sony VTC5's so no problem with power, amps and volts etc as I never go above 120 watts but that's rare)
I usually vape between 80 and 100 watts in VW mode that is
.. Now. For the troubling issue I think I'm having.
I recently decided to switch to SS dual coils. To preserve battery life and put less strain on my mod.
.. I'm using 316L premade Clapton's and Aliens at 0.25 ohms (0.14 dual) which is what I'm at.
I understand i can us them in VW mode at around 40-60 watts. But am going towards TC mode and using the SS setting.
I'm at 250°c and 35-50 watts
Air hole fully open
However, I am getting spitting from the coils at 40watts after just a few seconds. ( unless I hit it hard and really suck on it haha )
The flavour is good and the lack of heat is a nice change from what I was at.
I want to know if I am around the right limits as spitting can be caused by not enough watts. But when I go higher. Around 50-70 watts. It spits more and faster. So I'm kind of in a bit of head mess with it all.
Wicking is fine. Not too much and its not flooded. Cotton bacon v2
I'm just at a loss with if I'm at the right place with TC in terms of watts and temperature.
The last add on is that while vaping the temperature is set to 250°c but never goes past 150°c when firing
Am I doing something else wrong I don't know about?
Any help would be great.
Summary.
TC MODE
35-50 watts at 250°c but won't go past 150°c when firing ( same at 50-70 watts)
0.14 dual Clapton's and alien coils
The only thing I'm really confused about is why its not passing 150°c when I'm setting it to 250°c
And I think I'm at the right place with wattage so I'm really confused haha
Last edited: