Following Smok instruction but keep getting "Invalid Chip ID" when I tap connect
Fuck that's a good suggestion. I didn't think that someone could gave forgotten to unzip or tried opening from the zipped folder. Good call on that oneMake sure you unzip the file instead of running the update program from inside the zip file. Also make sure that the file-config.ini file is in the folder with the Upgrade software. I've also heard about people having problems when updating their Aliens when the tank is attached to the Alien but when the mod is taken off, it updates fine.
zipped files are compressed. you need to uncompress them. windows 10 has it built in. just right clock the folder and select extract allI'm having this same issue with my marshal g320. ....shit, I wish I knew what you guys were talking about.....smh. I wish they did the updates through Xbox one. I would be good. Unzip? Lol. I have no clue what any of this means......
I think the computer I'm using is Windows 7....im not even sure. I did something with extracting....then tried opening the programming tool, and connect....still invalid chip ID. I'm sure I'm probably doing everything wrong.....i suck so bad. Smh. Lol.zipped files are compressed. you need to uncompress them. windows 10 has it built in. just right clock the folder and select extract all
I'll tell you what. If you don't mind waiting I'll record when i update mine tomorrow and make a video for you to watchI think the computer I'm using is Windows 7....im not even sure. I did something with extracting....then tried opening the programming tool, and connect....still invalid chip ID. I'm sure I'm probably doing everything wrong.....i suck so bad. Smh. Lol.
I'll try anything.....ive had this mod since Tuesday, and havent used it yet. I'm afraid I'll have the issue with the screen going blank and fucking up the mod. I'm going to work in an hour, and I get home 6am. I'll be around after that, all weekend (in between the football games, lol). I appreciate any and all help.I'll tell you what. If you don't mind waiting I'll record when i update mine tomorrow and make a video for you to watch
just use it with old firmware for now. i've been using mine with the firmware that came on it and it works great. I'll make a video this weekendI'll try anything.....ive had this mod since Tuesday, and havent used it yet. I'm afraid I'll have the issue with the screen going blank and fucking up the mod. I'm going to work in an hour, and I get home 6am. I'll be around after that, all weekend (in between the football games, lol). I appreciate any and all help.
I've heard of people having problems with it. And it's cause the new firmware isn't updated. With the way my luck has been lately.......i will be one of those few people. Smh.just use it with old firmware for now. i've been using mine with the firmware that came on it and it works great. I'll make a video this weekend
careful what you hear. a lot comes from user error. I haven't had any issues personally and DJLsb did his review and gave it a glowing recommendation. I doubt you will have any issues with it at allI've heard of people having problems with it. And it's cause the new firmware isn't updated. With the way my luck has been lately.......i will be one of those few people. Smh.
are you sure you opened the extracted files? right click and see if you can still unzip. If you can unzip them to your desktop and make a folder call it smok. after that is done look at your desktop for the smok folder. go into it and proceed from there.I think the computer I'm using is Windows 7....im not even sure. I did something with extracting....then tried opening the programming tool, and connect....still invalid chip ID. I'm sure I'm probably doing everything wrong.....i suck so bad. Smh. Lol.
I'll check that out when I get home.....thanks!!are you sure you opened the extracted files? right click and see if you can still unzip. If you can unzip them to your desktop and make a folder call it smok. after that is done look at your desktop for the smok folder. go into it and proceed from there.
that was my issue when i first did it. I extracted the files but was still opening the updater from the zipped folder. You need to make sure you open it from the extracted folder.I'll check that out when I get home.....thanks!!
Install 1.2.11 tonight on mine. So far so good. Haven't thrown a TC-SS coil in yet, that will be tomorrow's test.careful what you hear. a lot comes from user error. I haven't had any issues personally and DJLsb did his review and gave it a glowing recommendation. I doubt you will have any issues with it at all
Gottcha.....i think that's what I was doing....im so computer illiterate....pictures don't even help. Smh. Lol. I'm gonna check it out as soon as I get home from work....thanks!!that was my issue when i first did it. I extracted the files but was still opening the updater from the zipped folder. You need to make sure you open it from the extracted folder.
how do you change the coil type? i cant find it in the settingsInstall 1.2.11 tonight on mine. So far so good. Haven't thrown a TC-SS coil in yet, that will be tomorrow's test.
@Swizz017 -- same here.if you need any help feel free to shoot me a pm. Im up all night usually.
fire button three times > hold fire on "MODE" > left right buttons (or fire button short) to scroll through the modes.how do you change the coil type? i cant find it in the settings
Bout to give it another try.....@Swizz017 -- same here.
Gonna give it another go....if you need any help feel free to shoot me a pm. Im up all night usually.
Sounds good!It worked!!!! It wooooooorrrrrkkkkked!!! You guys are the bomb diggity!!! Thanks so much. Couldn't of done it without your guys help!! Wooooohooooo!!!
Following Smok instruction but keep getting "Invalid Chip ID" when I tap connect
I had this problem too, tried to update from v1.2.1 to v1.2.11 (on a unit purchased April 2017, authenticated and from Feb 2017 batch), searched all over the internet, finally found something that worked. Had to download a different NuMicro program and just use the same .hex file from Smok.
Found the link to download it here: http://blog.3fvape.com/mod-apv/guidance-of-smok-x-cube-ii-firmware-upgrade/#comment-401
the actual link to download the tool is:
http://7xjcc4.com2.z0.glb.qiniucdn.com/device/ISPTool.zip
Downloaded this tool, it connected no problem, had it updated in minutes (after 3 hours of internet research)
I had this problem too, tried to update from v1.2.1 to v1.2.11 (on a unit purchased April 2017, authenticated and from Feb 2017 batch), searched all over the internet, finally found something that worked. Had to download a different NuMicro program and just use the same .hex file from Smok.
Found the link to download it here: http://blog.3fvape.com/mod-apv/guidance-of-smok-x-cube-ii-firmware-upgrade/#comment-401
the actual link to download the tool is:
http://7xjcc4.com2.z0.glb.qiniucdn.com/device/ISPTool.zip
Downloaded this tool, it connected no problem, had it updated in minutes (after 3 hours of internet research)
I had this problem too, tried to update from v1.2.1 to v1.2.11 (on a unit purchased April 2017, authenticated and from Feb 2017 batch), searched all over the internet, finally found something that worked. Had to download a different NuMicro program and just use the same .hex file from Smok.
Found the link to download it here: http://blog.3fvape.com/mod-apv/guidance-of-smok-x-cube-ii-firmware-upgrade/#comment-401
the actual link to download the tool is:
http://7xjcc4.com2.z0.glb.qiniucdn.com/device/ISPTool.zip
Downloaded this tool, it connected no problem, had it updated in minutes (after 3 hours of internet research)
try to load the correct firmwareI bought a Smok 85 and I updated the fireware by accident to the ALIEN V1.2.11 software.
I thought the AL85 device would be using the same fireware as it was a baby version.
I have bricked my device. Its not longer turning on.
Do you have any suggestions.
If anyone could download their AL85 fireware and upload a link that might help.
Thank you