Do you know you're G2 well? What setting are you using? What do you do to your mod after you changed the coil? Have you read the G2 user's guide? Are the 510 contacts clean? IMO, it's not the coils, but most likely the way you use your mod.Hello i vape on a G2 with a baby beast but only after 4 days both the coils that came with it give me the burned taste ? I vape at the range the coil recommended and i primed each coil. What is happening ?
Do you know you're G2 well? What setting are you using? What do you do to your mod after you changed the coil? Have you read the G2 user's guide? Are the 510 contacts clean? IMO, it's not the coils, but most likely the way you use your mod.
I had the same problem until a friend told me to take cuticle scissors and poke holes in the side where the cotton absorbs liquid. After doing this everytime I put a new coil in combined with proper priming, they last for 2 good weeks at least of heavy vaping. I almost gave up on the tank and now I am so glad I didn't. It vapes like a dream now after that little trick.
Try it with a new coil and you will be shocked how much better the flavor is as well as the life of the coil.
Sent from my SM-J700P using Tapatalk
Same here. Coming up on 5 weeks with the original T8 coil. Vaping at 120w and well over 250ml of juice as gone thru the sumbitch. First time in my vaping life that I actually WANT a coil to die. I just want to try the T10 or T6, but still curious as to how long this big bastard will hang in there. Crazy....
This is the V8T8 CloudBeast at 125w.. didn't have to poke holes in it and it's still going strong after about 5 weeks vaping it everyday.
go figure, lol
Sent from my XT1585 using Tapatalk
My coils would burn out in 2-3 days on my crown and tfv4. I switched to a griffin and never looked back! Plus you save so much money not buying coils
Sent from my iPhone using Tapatalk
It's called convenience Mike...Least it is for me...And the money I save not buying 4 cartons of Marlborough a month anymore buys ALOT of premade juice, coils, mods, tanks, etc..no worries, loli cant do tanks that only rely on pre built coils..One of the biggest rip offs in the industry along side of pre made-juice.
I vape at max ratios at about 120 wattsWhat pg/vg ratio is everyone using? I am not certain but I think my issues with the crown and tfv4 coils were because of high vg juice. Also I think majority of the vaperz were using low wattages. Granted the guy above says he uses his at high wattage but I'm not sure if that's the majority.
Im using 100% VG in the both the CloudBeast and BabyBeast tanks with no issues at at.. No dry hits or leaking...What pg/vg ratio is everyone using? I am not certain but I think my issues with the crown and tfv4 coils were because of high vg juice. Also I think majority of the vaperz were using low wattages. Granted the guy above says he uses his at high wattage but I'm not sure if that's the majority.
Well I'm at a loss then. As stated I haven't had great experiences with the pre-made coils for the crown or the tfv4. At best 4 days. Now I use a Boreas and use close to 30 ml a day and my coils last much longer.Im using 100% VG in the both the CloudBeast and BabyBeast tanks with no issues at at.. No dry hits or leaking...
Sent from my XT1585 using Tapatalk
Good to know and crappy QC in China mass produced coils is nothing new.Tfv8 coils are a hit and miss. I have a tfv8 with the v10 coil and that lasted about 4 weeks. But with my v8 coils i had some last two days. And others last 4 weeks. I have noticed after priming my coils it tastes like absolute dog shit. I think they presoak the coils in something
Sent from my 6045O using Tapatalk
@Mike H. After I started building my own coils I thought I would save until I started going through 20ml of juice daily. Now I got into DIY E-Juice and after the initial investment, I can't get over how much less it costs per ml once you nail some good recipes.i cant do tanks that only rely on pre built coils..One of the biggest rip offs in the industry along side of pre made-juice.
I run my t8 at 62.5w.... works well enough for me.Mind you I'm running the BB tho.I did the whole rebuilding thing for years and burnt out on it, the Baby/Big Baby have been a saving grace getting at least two weeks+ from coils before I switch. I do run them at less than the suggested wattage because I bump them up slowly until I get the vape I want and then run with it and haven't had any issues at all.
Hello i vape on a G2 with a baby beast but only after 4 days both the coils that came with it give me the burned taste ? I vape at the range the coil recommended and i primed each coil. What is happening ?
The coil wattage ratings are exaggerated just like many mod max watts.Hello i vape on a G2 with a baby beast but only after 4 days both the coils that came with it give me the burned taste ? I vape at the range the coil recommended and i primed each coil. What is happening ?
The coil wattage ratings are exaggerated just like many mod max watts.
if you vape at the max rated watts they do not last long at all.
Good for profits on coil sales.
This I am going to try next time I change coils, I forgot to try this last time and just changed it two nights ago. So in about 2 or 3 weeks.2) I put 3 pin holes in each cotton section (vertically push through) also pin at the top for good measure (although careful not to disrupt coil)
Go figure? Ok,well I simply don't believe you because you are lying..lol Poking holes is the only way you will get even a week of acceptable.vapimg from Any pre build smok coil,either that or.you hit it once or twice a.day,in that case I apologise for accusing you of lying.
This is the V8T8 CloudBeast at 125w.. didn't have to poke holes in it and it's still going strong after about 5 weeks vaping it everyday..
go figure, lol
Sent from my XT1585 using Tapatalk
Incorrect.. still burn outWhen you prime the coils and let them sit do you then turn down the watts and start low working your way up a few watts at a time till you get to your desired watts? If not then that is your problem.
I just got a smok X8 baby and I'm only running the 3000 mAh battery it came with so it doesn't over do the wattage,it came in the kit and I'm getting.about 2 days a coil and I have primed,then let sit full with juice and did.dry hits in between to make sure I sucked more juice into the cotton,never overvaped etc.. and 2 days,my friend. To bad too because I love the thing.Well I'm at a loss then. As stated I haven't had great experiences with the pre-made coils for the crown or the tfv4. At best 4 days. Now I use a Boreas and use close to 30 ml a day and my coils last much longer.
This is great advise...I was getting dry hits A LOT and I too was getting frustrated. I used a sewing needle and poked holes through and through. This was suggested by Rip Trippers. Now the coils are working great.I had the same problem until a friend told me to take cuticle scissors and poke holes in the side where the cotton absorbs liquid. After doing this everytime I put a new coil in combined with proper priming, they last for 2 good weeks at least of heavy vaping. I almost gave up on the tank and now I am so glad I didn't. It vapes like a dream now after that little trick.
Try it with a new coil and you will be shocked how much better the flavor is as well as the life of the coil.
Sent from my SM-J700P using Tapatalk
I have a batch of the original coils, they do indeed last several weeks.