Hi All modders I have a Great deal on a 100 Watt box mod kit with a lot of features, Fat Daddy 510 connector w/ 22mm washer, Reverse battery protection, volt meter, charging board, magnets for the cover, choice of Hi quality stainless steel switch or nickle plated dome horn button, over load protection,a graduated voltage adjust and a charging board. No matter how many of the extras you use you'll have a great 100 watt OKL box mod that will be worth $150-$200. This kit includes a pictorial and schematic lay out and a Hammond 1590B box.
This is a fun kit to build, Vaps like nothing I have ever used, it has so much power, has all the latest features, and is Au-sume to look at.
PARTS LIST
Choice of 16mm stainless steel switch or nickle plated dome horn button
Die cast aluminum box Hammond 1590B
OKL2-T/20-W12N2-C 20A 100 watt chip
Fat Daddy 510 with 22mm locking washer
keystone 1049 battery sled
For reverse battery protection P channel MOSFET RED LED 220 ohm 1/4 watt resister
2- 22 ufd capacitors
2- 9 Amp reset-able fuses
4- 1/4" X 1/8" magnets
1K through hole trim pot with graduated dial
20k 1/4 w resistor
1.43k 1/4 w resistor
N channel FET
1K 1/4 w resistor
5.6 volt zener diode
.28" red led 2.5 - 30 volt 3 digit volt meter and 3 position DPDT switch
Board TP4056 lithium charge management chip - optional
16 gauge red & black wire
26 gauge black & yellow wire for control circuit
heat shrink tubing
This is a fun kit to build, Vaps like nothing I have ever used, it has so much power, has all the latest features, and is Au-sume to look at.
PARTS LIST
Choice of 16mm stainless steel switch or nickle plated dome horn button
Die cast aluminum box Hammond 1590B
OKL2-T/20-W12N2-C 20A 100 watt chip
Fat Daddy 510 with 22mm locking washer
keystone 1049 battery sled
For reverse battery protection P channel MOSFET RED LED 220 ohm 1/4 watt resister
2- 22 ufd capacitors
2- 9 Amp reset-able fuses
4- 1/4" X 1/8" magnets
1K through hole trim pot with graduated dial
20k 1/4 w resistor
1.43k 1/4 w resistor
N channel FET
1K 1/4 w resistor
5.6 volt zener diode
.28" red led 2.5 - 30 volt 3 digit volt meter and 3 position DPDT switch
Board TP4056 lithium charge management chip - optional
16 gauge red & black wire
26 gauge black & yellow wire for control circuit
heat shrink tubing