Too much tensionHello fellow vapers, is their anyone out there that can tell me why my wires for my builds keep breaking at the chuck of the drill never happened much before I use spro swivels and still this happens any tips?
Coiling claptons, seems it wasn't twisted enough correctly at the end where the wire goes into the drillToo much tension
Thank you I'm heavy handed for sure probably pulling too hard, will do on the swivelsThere is either too much pull tension, too much tension while the wrap is being claptoned and twisting the wire excessively or the swivels are binding..could be a mixture of all three...
You shouldnt hold the wrap wire too much, a slight pinch on the spool or wire will give enough tension needed.
Your just Claptoning so you dont need the wire perfectly straight, just enough to have the wire at level...try not pulling on the drill too much.
Wash your swivels and blow them dry, grab some Royal Purple from walmart or some Graphite Lube....use sparingly in them
This happened to me when I didn't have the drill chuck level with the swivels. Fixed that and no more breaking.Hello fellow vapers, is their anyone out there that can tell me why my wires for my builds keep breaking at the chuck of the drill never happened much before I use spro swivels and still this happens any tips?
Thank youThis happened to me when I didn't have the drill chuck level with the swivels. Fixed that and no more breaking.