I bought Bellerophon a while back. Aside from aesthetically pleasing, I liked the air flow and it's raised position. Also looked to have a lot of margin when wicking, or rather, hard to flood if wicked loose because of all the room between the deck floor and the AF/bottom of coil.
I've wicked it 3x.
1st - Thinned tails a little and tucked the bottom 1/2 under the coil and the top 1/2 down the wicking slot. Leaked.
2nd - Thinned, cut short and left most of it at the top of the slot - on the deck at the ends of the coil. Leaked.
3rd - In the wicking slot only. Leaked.
I was bummed I couldn't just basically throw some wick in there and be done, so I shelved it.
I was going to visit it yesterday and didn't.
But am today to get it nailed down because it does have nice AF and great flavor. Looks awesome too imo.
The grubs are too small though. Have to be careful not to use the same force as most when tightening. Not the threads, but the the hex head will start stripping so just snug enough to hold the coil and stop.