I don't have the icon or iconic rdas, just didn't interest me but this sexy thang sure does. Surprised Mike went with a single coil but this rda looks damn good and really like the overall design.
He doesn't have his own live show but he is on shows with Heavy Metal Vaper, Vapn Fagn and ST Vapes (and others from time to time) pretty much every week.Haven't watched any of Mike's live shows so I had no idea he enjoyed single coil attys for his squonkers.
I ll have to check that out.That Aspire mod has been in the works for some time so I am glad it is finally coming out. Hopefully it performs (and does TC) well.
He doesn't have his own live show but he is on shows with Heavy Metal Vaper, Vapn Fagn and ST Vapes (and others from time to time) pretty much every week.
That was in Heathen's channel update video:I did not see an Aspire Squonker, maybe I missed it?
Ah, ok! Was just going off the linked video.That was in Heathen's channel update video:
Sounds we're in the same boat for 1st squonk setup. I'd rather have dual battery regulated but since it won't be my ADV or OTG, a single battery might be ok. Depends on what shows up soon. I do like the Recurve deck design, and contemplating Hellvape Anglo in single mode but haven't decided if it leaks too easy.I ll have to check that out.
Didn't know the aspire squonk is going to be regulated. I like it even more now. The black/blue Aspire with the recurve would be nice combo for me. Especially since I don't have a squonker yet lol.
Lol, glad I'm not the only one late to the squonk party.Sounds we're in the same boat for 1st squonk setup. I'd rather have dual battery regulated but since it won't be my ADV or OTG, a single battery might be ok. Depends on what shows up soon. I do like the Recurve deck design, and contemplating Hellvape Anglo in single mode but haven't decided if it leaks too easy.
I am jealous.i relented and purchased it from fasttech, was after a bunch of different drip tips and had one of those “how did that get in the basket moments”...now for the slowboat wait
I am jealous.
found a code online for a 5% off “SAVING” think it was $24 after
This is gonna live on the feedlink mod...being its a rip off of the kylin mini which had excellent flavour I couldn’t resist especially with the thought of an rda without the wicking hassles of the mini
I haven't tried dripping it but I would think you would have to drip very little (to prevent spit back) and very often (to prevent dry hits) due to how small the wells/chamber are. I run mine in TC mode and squonk it every 3 or 4 pulls. If mine were on mechs I would probably squonk it every 2 pulls to make sure I didn't get a dry hit.This thing looks really great. Know that its designed to squonk but am wondering how it would be as a regular dripper? Problematic?
What color did you order? Since your going to set it up on the new Aspire squonker I'm guessing black.Rare these days I get excited about a product but there’s so many good comments coming out for this can’t wait to try it out
Please don’t be hype train <crosses fingers and toes>
What color did you order? Since your going to set it up on the new Aspire squonker I'm guessing black.
I have 2 in daily rotation on rsq's and love em. great flavor, only real con is no deck lip so they seep on my mods' 510 plates
I didn't even notice it was happening until after 100ml when I was re-wicking to change flavors as it mostly remains under the deck though depending on your mod color you may notice it at the edge of the cap. I am a over-squonker and usually squonk every 2 or 3 pulls with the recurve, and most other attys as well.Thanks fozzy ill check for that, hopefully i wont have to take the top cap off too often
@stanglifemike I actually thought the rda was too restrictive for me at first as I run all my other rda/rsa wide open but I got used to it quickly and don't mind it now given how great the flavor/vape is.
I didn't even notice it was happening until after 100ml when I was re-wicking to change flavors as it mostly remains under the deck though depending on your mod color you may notice it at the edge of the cap. I am a over-squonker and usually squonk every 2 or 3 pulls with the recurve, and most other attys as well.
edit: I actually was able to make my recurves leak once or twice by squonking with it on an angle while chain vaping. The warmed up deck/juice and holding it on an angle made the juice weep out the air holes so now I make it a point to hold the mod very vertical when I squonk.
My recurves are on my rsq's, i put a pulse 22 and DR 24 on my new pulse boxes. I can throw a recurve on there real quick for a pic though I suppose:@fozzy71 If you have a Recurve on a Pulse 80, would you post a pic of it? I was planning to buy a Pulse 80 at the vape convention last month, but no no one had it. 2 of my local shops now have it and I've almost bought one a couple times. I went with the intent to buy it a couple weeks ago, but that shop had just got the Rage squonker and I couldn't decide which to get
Sent from my SM-N950U using Tapatalk
Yeah, I have 5 single battery squonks in rotation right now and all are running single coil builds. The recurves are the best of the bunch for flavor. Mine are on the RSQs which have the 'waterproof' chip so I am not too worried if some juice finds it way down thru the 510 connection into the mod.
I really like the looks of the feedlink and it got pretty positive reviews, might have to grab a couple, but I am over my vape budget after the 2 new pulse 80w boxes last week (and 5 new pair of shoes this weekend for my daily 5 mile walks).
Yeah, I have 5 single battery squonks in rotation right now and all are running single coil builds. The recurves are the best of the bunch for flavor. Mine are on the RSQs which have the 'waterproof' chip so I am not too worried if some juice finds it way down thru the 510 connection into the mod.
I really like the looks of the feedlink and it got pretty positive reviews, might have to grab a couple, but I am over my vape budget after the 2 new pulse 80w boxes last week (and 5 new pair of shoes this weekend for my daily 5 mile walks).
Checked mine after reading your post and it was wet. I never remove it, so I hadn't noticed that before.
Looks good! What color Dead Rabbit is normally on top? Mine is black w/silver logo, I'll bet it will look good on top. If I decide to get the Pulse, that full black carbon is the color I'll most likely get. I've never cared for resin in the past, but I like the Lava Red and Aurora Resin. Original Pulse doors are everywhere so I assume doors for the 80 will be available before long. I'd like to be able to switch door colors if I get it
Sent from my SM-N950U using Tapatalk
What other single coil rdas do you own that you can compare it to?
I might pick one of these up but don't see how it can get any better flavor wise than my either or wasp nano.
Yeah he finally has a winner. Still to soon to say for sure, but on its way to being in my top 3.In love with this rsa. Great flavor and super smooth airflow!
I like the coil legs a little shorter than suggested, works best for me.
Big thumbs up for Mike!View attachment 112988
In love with this rsa. Great flavor and super smooth airflow!
I like the coil legs a little shorter than suggested, works best for me.
Big thumbs up for Mike!View attachment 112988
Recurve on dreamer, may have to drip a bit more often but I love the airflow and flavor. Awesome battery life with a single coil on a 40T 21700
Yeah he finally has a winner. Still to soon to say for sure, but on its way to being in my top 3.
Black DR 24 clone with a drip tip (dont remember which rda it came off) that seems to match the resin pretty well. I sorta wish I had got 2 resin versions instead of 1 resin one fake carbon fiber.
p.s. The recurve thankfully makes connection with the pulse 510 but my Athena and DR SQ would not make connection when I tried replacing my DR 24 clone. The DR 24 was pissing me off because of no locking barrel when trying to use the refill bottle.
Yeah he finally has a winner. Still to soon to say for sure, but on its way to being in my top 3.
Damn nice set up matey!
That's exactly what I thought!! It could just be the lighting and angle of the camera, but in the photo it looks like they were designed and manufactured by the same company and packaged together in a kit.Like it was made for that mech ...perfect combo
I haven't investigated close but I assume the squonk pin on the athena and dr sq just don't protrude enough to make contact with the pulse 80w pin. I watched a lot of reviews (and live shows where the pulse 80w was in use) and don't recall any of them mentioning the issue but who knows how many different attys the reviewers actually try on each mod. I am a bit bummed out by it but I will probably just take a recurve off an RSQ and toss it on the pulse 80w to replace ther DR 24, then throw the DR SQ I just rebuilt on the RSQ, the next time I changing out juice in those mods. Or maybe I will just go buy another Pulse 22 in black (or maybe 2, if they have them as I don't care for the SS Pulse 22 on that carbon pulse) from a local shop today or tomorrow as I prefer that over the DR SQ (I hate the hot cheek effect when purging on the DR SQ).Thanks, that looks GREAT!! The more I see certain resin colors, the more I think I want resin instead of black carbon. I think silver carbon looks ugly in the stock photos, but in person it isn't as bad. Silver Black Carbon and Seaweed Green are the only two colors I don't like.
That's odd that 2 different RDAs wouldn't work on it. Is there anything different/weird about the Pulse 80's 510 connection, or anything you can see that might interfere with certain attys and keep them from making a connection? Do you know if anyone else has had issues with attys not working? And if no one else has had issues, do you think yours could have a manufacturing defect?
You talking about the refill bottle that comes with the "High End Edition"? I don't know why VV and/or Tony decided to call it that, but I think it's dumb
Sent from my SM-N950U using Tapatalk