Become a Patron!
The Attack of the 25mm Atomizers - AKA Gotta Love Vape Mail
- Thread starter Wingsfan0310
- Start date
That's not what I was hoping to hear. If worse comes to worse I'll just eat it. Thankfully it was on sale and I'll only be out ~$25. If they screw me around I'll never order anything from them again and make sure I let people know about it!
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Did you figure out why the resistance was jumping around?
Give it a shot bro.. They will respond though.. But god damn, they might as well tell
FUCK U
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
You've had a bad experience with them?
Thanks Ray but I couldn't in good conscious pass off my problem on to someone else. Very nice of you to offer though, I appreciate that.
Cheers,
Steve
Not yet, I removed and reinserted the 510 pin but that didn't help tried it on a few different DNA200's with the same results. It's getting late and at this point I sat it down. Frustration was kicking in.
Cheers,
Steve
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
If they won't exchange it, I'll take a look at it for you if you want.
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Nevermind, I thought it was the Supreme you were having problems with, not the Griffin. My bad.
Since the deck is fixed, make sure the insulator around the 510 pin is seated well, then change the post screws. If that's not it, it's probably due to the positive post being improperly seated and there's no way to correct this as the deck won't remove from the base.
Since the deck is fixed, make sure the insulator around the 510 pin is seated well, then change the post screws. If that's not it, it's probably due to the positive post being improperly seated and there's no way to correct this as the deck won't remove from the base.
Last edited:
Scratch88683
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Damn that sucks now I'm really glad I didn't buy the griffin 25 I'll wait a few months and see if there's more problems. Sucks to hear eciggity is scummy with their returns for faulty products I buy almost everything through them and vapenw and never had an issue. You'd think they would all least let you send it to them so they can check out. Even my local b&m would exchange it for a new one I bought anew istick 40w tc's from them and it bricked in a week or two they opened it up to make sure I didn't get juice in it and fried the board but the inside was dry and they gave me a new one on the spot it was actually my first ever regulated mod and all I had was the mini goblin at the time so I new I didn't get it wet. Hope you figure out what's wrong!
Roxy is being too kind. This thing is a total piece of shit. One word of advise on buying one of these - DON'T
Well I just got the "Post a video response" from them. I'm sure as hell not going to fill it back up with juice and tip it over and take a 20 minute video showing it leaking on my desk. I'm not sure if I'm going to try and make a video with the mod on a DNA200 hooked up to Escribe (atomizer analyzer) showing the resistance climbing while just sitting there. Probably just end up eating it and chalking it up to a bad experience. One thing I can say for sure is I will never order from Eciggity again!!! Hell I get better CS from FastTech.
Cheers,
Steve
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Thanks for letting us know, and I'm sorry.
Yeah, with most vape hardware's small purchase price it's too easy to say fuck it... not worth me taking the time to get $25 back. If it's more than me sending it back on their dime, I'm moving on from the part and most important to them... the vendor.
Sucks to hear, only ordered from eciggity once and didn't have a service need but hearing about their return policy... I won't be buying from them unless they are the only place that has what I'm looking for and I just have to have it
Sucks to hear, only ordered from eciggity once and didn't have a service need but hearing about their return policy... I won't be buying from them unless they are the only place that has what I'm looking for and I just have to have it
That wrap is nixe where did you get it
SINCE you showing off, I show my CHUBBIES
Sent from my iPhone using Tapatalk
Jwraps bro
Nice im gonna have to get one of those
Got my G25 today. Love it so far. Just as good as the 22mm but with some improvements. Snugger JFC and larger capacity do it for me.
I have an update on both Eciggity and the Griffin 25 if anyone is interested. I decided to talk to Eciggity again about having to make a video. They replied with a return label and asked me to send it in. Makes me feel better about their CS.
I've been laid up the better part of this week with a nasty flu/cold. Yesterday I decided to try switching the grub screws but also used a bottle brush in the holes the coils go in. I swear I saw a piece of metal come out of one of them. Long story short I rebuilt it again and so far the resistance has been stable. Either one of the grub screws was not a good match or there was a burr that was preventing a solid connection. Looks like I'm going to end up keeping it.
PS Just to prove Murphy's Law is still in effect, I decided to look at the frosted glass since I got the tank sorted. I pull out the glass and wouldn't you know the side that you couldn't see is cracked (still on 1 piece but a crack in the shape of a V from the top to the bottom). If I was a conspiracy theorist, I'd swear they put it in so the crack was hidden by the foam. It looks perfect if just looking at in the packaging. Not really a big deal, their USA service center is within an hours drive of my house (might give them a call and see if they replace the frosted glass). The Griffin itself is actually working pretty good now. It fought the good fight but in the end I prevailed
. Probably a good thing with the deeming regs, having another good tank on hand can't hurt.
Cheers,
Steve
I've been laid up the better part of this week with a nasty flu/cold. Yesterday I decided to try switching the grub screws but also used a bottle brush in the holes the coils go in. I swear I saw a piece of metal come out of one of them. Long story short I rebuilt it again and so far the resistance has been stable. Either one of the grub screws was not a good match or there was a burr that was preventing a solid connection. Looks like I'm going to end up keeping it.
PS Just to prove Murphy's Law is still in effect, I decided to look at the frosted glass since I got the tank sorted. I pull out the glass and wouldn't you know the side that you couldn't see is cracked (still on 1 piece but a crack in the shape of a V from the top to the bottom). If I was a conspiracy theorist, I'd swear they put it in so the crack was hidden by the foam. It looks perfect if just looking at in the packaging. Not really a big deal, their USA service center is within an hours drive of my house (might give them a call and see if they replace the frosted glass). The Griffin itself is actually working pretty good now. It fought the good fight but in the end I prevailed
. Probably a good thing with the deeming regs, having another good tank on hand can't hurt.Cheers,
Steve
So u keeping it?I have an update on both Eciggity and the Griffin 25 if anyone is interested. I decided to talk to Eciggity again about having to make a video. They replied with a return label and asked me to send it in. Makes me feel better about their CS.
I've been laid up the better part of this week with a nasty flu/cold. Yesterday I decided to try switching the grub screws but also used a bottle brush in the holes the coils go in. I swear I saw a piece of metal come out of one of them. Long story short I rebuilt it again and so far the resistance has been stable. Either one of the grub screws was not a good match or there was a burr that was preventing a solid connection. Looks like I'm going to end up keeping it.
PS Just to prove Murphy's Law is still in effect, I decided to look at the frosted glass since I got the tank sorted. I pull out the glass and wouldn't you know the side that you couldn't see is cracked (still on 1 piece but a crack in the shape of a V from the top to the bottom). If I was a conspiracy theorist, I'd swear they put it in so the crack was hidden by the foam. It looks perfect if just looking at in the packaging. Not really a big deal, their USA service center is within an hours drive of my house (might give them a call and see if they replace the frosted glass). The Griffin itself is actually working pretty good now. It fought the good fight but in the end I prevailed
Cheers,
Steve
Yes sir. After all the effort I put into it, it's finally rock solid stable (resistance wise). Heck, I got it on a great sale for $26 and change. Like I mentioned in the above post, with the DOOMING Regs, you can't have too many tanks imo.So u keeping it?
Cheers,
Steve
Good man,I like the frosted glass...
I received the Black (Smoke) glass today for my Aromamizer Supreme. I normally just go with clear glass but I have to say I really like the look of this combination.
PS I think it looks just a tad darker to my eyes than it does in the picture.
Cheers,
Steve
PS I think it looks just a tad darker to my eyes than it does in the picture.
Cheers,
Steve
I received the Black (Smoke) glass today for my Aromamizer Supreme. I normally just go with clear glass but I have to say I really like the look of this combination.
PS I think it looks just a tad darker to my eyes than it does in the picture.
Cheers,
Steve
VAPE ON
Last edited:
I have the Billow V3 Plus too and I definitely prefer the Aromamizer Supreme. I like the V3 plus, just not as much as the Supreme. Different strokes for different folks.
Cheers,
Steve
Cheers,
Steve
One plus for the Billow V3 Plus in my book is it's not as thirsty as my Supreme. The Supreme sucks down juice like no other lol.
Yeah, It's the case for an RX200.It looks like the wrong case? lol
Nice...
VAPE ON
So the reason I got the supreme and not the boreas is separate control of juice and air flow.
Is there a reason I'm missing so many of you prefer the Boreas?
Is there a reason I'm missing so many of you prefer the Boreas?
That's the same reason I went with the Supreme as well. That and it has knurling in all the right places.
Cheers,
Steve
Dude the BOREAS is 23 bucks at ECIGITY
You can't go wrong with it...
The only way to find out why we think it's a great tank is to BUY one..
The integrated JFC-AFC looks scary for a lot of folks
But that the greatest advantage of the BOREAS, wicking is phenomenal
No dry hits, and it just keeps up, unlike the other RTA/RDTA
So buy one?
VAPE ON
I'm in the process of reviewing this flood of 25mms. I'm doing the griffin 25, the tf rta, and the herakles rta-2.I received three different 25mm RTA's in the last few days along with 8 Samsung 25R's and 8 LG HG2's. Lots of great sales so I stocked up. So far I've only had a chance to build 2 of them (Aromamizer Supreme and Billow V3 Plus). I plan to update this thread with my thoughts as soon as I have a little more time with them. From just the short time I've had them I can say (for me at least) they are a big step forward compared to my 22mm RTA's.
RTA's in question:
1. Aromamizer Supreme - I've had this one the longest and I really don't have any cons on it. Great flavor, big vapor, and easy to build (like an RDA). I have a Black on way as well. (FastTech has them for ~$32 in SS and $35 in Black without discount code MAP)
2. Billow V3 Plus - Just built it a couple of hours ago. Biggest build deck, smooth airflow, great flavor (maybe just a touch less than the Aromamizer), and big flavor. Eciggity was running a 30% off Spring Sale - got it for $27.99.
3. Griffin 25mm - Incomplete because I haven't had a chance to build on it yet. From taking it apart it doesn't feel quite as nice as the other 2 (threads don't feel quite as smooth and when trying to take off the build deck the whole tank unscrewed - probably user error). I plan to build it later tonight or tomorrow. Eciggity was running a 30% off Spring Sale - got it for $25.89
Notes All have Velocity style decks
Batteries:
Gearbest was having a Flash Sale, I bought 8 Samsungs 25R's for $29 and 8 LG HG2's for $35 (shipped) plus I had some discount points to knock a few more dollars off. I just couldn't pass them up at that price. As a nice touch, they included the battery cases for free. They are really quite nice (sturdy, not flimsy like some cases)
L to R Lavabox w Griffin 25mm (Top Airflow), Reuleaux w Aromamizer Supreme, Lavabox w Billow V3 Plus
L to R LG HG2's, Samsung 25R's
Cheers,
Steve
Edit I hope everyone posts pictures of their 25mm attys if the mood strikes. Would be nice to see.
Edit 2 My Griffin 25 leaks from the top while inverted and my resistance is unstable rendering it useless for me in TC. I'll update if I come up with a solution. As of now I can't recommend the Griffin 25.
Sent from my SM-G935V using Tapatalk
That Herakles RTA2 looks real nice
Ok ok I'll buy one, you twisted my armDude the BOREAS is 23 bucks at ECIGITY
You can't go wrong with it...
The only way to find out why we think it's a great tank is to BUY one..
The integrated JFC-AFC looks scary for a lot of folks
But that the greatest advantage of the BOREAS, wicking is phenomenal
No dry hits, and it just keeps up, unlike the other RTA/RDTA
So buy one?
VAPE ON
It is. I like it a lot. 316L staple coils in there are pretty amazing. And wicking is SO much easier than the other 25mm beast tanks around. That wicking is so dead easy
Sent from my SM-G935V using Tapatalk
I don't see how wicking could be easier than it is on the Supreme. Just lay it on the deck. No trying to get it behind a wick retaining ring, in a small hole, just the exact length in the juice channels, etc. I've not gotten dry hits or leaks. I have lots of RTA's and none of them are as easy as the Supreme to wick.
Filling is also easy. Shut the juice control, fill, then open it. No flipping, burping, etc. It's by far my favorite RTA I've ever had.
Cheers,
Steve
Filling is also easy. Shut the juice control, fill, then open it. No flipping, burping, etc. It's by far my favorite RTA I've ever had.
Cheers,
Steve