Just got my IPV 5, having an issue...

[diceman1000]

Just got my IPV 5 today, put my Crown on and set TCR to .00092 for the .25 ohm SS coil... The pulsing is atrocious and I have to crank it all the way to 572 degrees to get a remotely decent vape and the pulsing feels like the vapor is rapid during into my mouth... Am I doing something wrong? Did I get a dud mod?

Sent from my LGUS990 using Tapatalk

 

[Deucesjack]

Just got my IPV 5 today, put my Crown on and set TCR to .00092 for the .25 ohm SS coil... The pulsing is atrocious and I have to crank it all the way to 572 degrees to get a remotely decent vape and the pulsing feels like the vapor is rapid during into my mouth... Am I doing something wrong? Did I get a dud mod?

Sent from my LGUS990 using Tapatalk

If your in tc mode what's the joule setting you're using?

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[Angrygod50]

Did you lock the cold resistance?(won't work right if you don't) I usually run 420F 40-50J on my Yihi chips with SS316L at 0.24 ohms.
I bumped the TCR to 95 also.

 

[diceman1000]

Did you lock the cold resistance?(won't work right if you don't) I usually run 420F 40-50J on my Yihi chips with SS316L at 0.24 ohms.
I bumped the TCR to 95 also.

Just tried these settings and get barely any vapor and no flavor... Maybe I have a bad coil...

Sent from my LGUS990 using Tapatalk

 

[Deucesjack]

Just tried these settings and get barely any vapor and no flavor... Maybe I have a bad coil...

Sent from my LGUS990 using Tapatalk

Can you try the coil on another mod in tc? What version firmware is on the mod?

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[diceman1000]

Can you try the coil on another mod in tc? What version firmware is on the mod?

Sent from my SAMSUNG-SM-N915A using Tapatalk

The I only other mod I have with SS TC is my rx200, and it's never really worked quite right... But I'll give it a whirl

Sent from my LGUS990 using Tapatalk

 

[Deucesjack]

The I only other mod I have with SS TC is my rx200, and it's never really worked quite right... But I'll give it a whirl

Sent from my LGUS990 using Tapatalk

Wooh, I have that mod too and the tank runs fine on that as well. Somethings not right.

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[diceman1000]

Never mind, just tried it on the RX and it's working fine... Dang it...

Sent from my LGUS990 using Tapatalk

 

[diceman1000]

Ok, just tried my wife's Crown with an ni200 coil and ni200 TC works very well...

Sent from my LGUS990 using Tapatalk

 

[diceman1000]

Well, just wound up an SS coil setup for my Crius... Same thing... So, I guess the mod is going back...

Sent from my LGUS990 using Tapatalk

 

[chuckpie85]

I had to crank the tcr value on mine way up for the crown coils. Could be the nr legs may not be the mod I think I have it at 110 for my TCR

 

[diceman1000]

Cranked the TCR to 125 and it's hitting like a champ now... Think I'm gonna keep it...

Sent from my LGUS990 using Tapatalk

 

[chuckpie85]

Ya mine works awesome with the tcr higher

 

[skt239]

I use the standard 000.0092 setting on my IPV5 and it works great. It's a bit weaker with tanks and needs a higher temp (500). When using RDA's with duel coils, it works perfectly. It's warm at 450-480 degrees with no pulsing whatsoever.

 

[diceman1000]

I use the standard 000.0092 setting on my IPV5 and it works great. It's a bit weaker with tanks and needs a higher temp (500). When using RDA's with duel coils, it works perfectly. It's warm at 450-480 degrees with no pulsing whatsoever.

i only use tanks, sub ohms and RTAs both, and mine doesn't work for crap with the TCR set to 92, 125 works quite well with the Crown coils though...