Well it's an eBay company and I paid with PayPal..... If they don't help me I'll open a PayPal case against them.
Sent from my 710C using Tapatalk
Sent from my 710C using Tapatalk
I emailed also the repair center explaining everything in detail..... So I contacted everyone......I feel your pain, for a MUCH smaller outlay though.
Some places dual sell, at their self online presence and on eBay (or Amazon). Might be worth looking up alternative contacts, just in case.
I took my (1) year old mod RX200 that worked good bit looked beat, and sent it to a buddy in Louisiana that builds 4s lipos and he told me he put a 510 v2 Varitube in it painted it silver changed all the thin wires 're soldered everything and hydro dipped the front and rear panels hand painted and GOSS clearcoated. Changed all (4) magnets with earth magnets..... He says the battery tray is still perfect.......I foresee a lot of these dropping dead. People went out of their way to say how superior it is. Just wait...... I wish no one ill fate but this thing is a POS IMO. YMMV perhaps if you are lucky. I took it apart and basically saw crap. Damn lucky the DNA200 has a fuse or a lot of people would be typing from the hospital with this mod. This is just my opinion and it will not change so no one needs to argue it. I take it at least one person already blocked my posts. That's fine but I tell you all just wait. Plus how many people are not on here that had one die in mere days? To be honest once Wisemec joined Joyetech they suck as well. The original Reuleaux pre Joyetech(DNA200) was extremely high quality and has lasted me over Two years now. That is useles to you guys though unless someone is selling a used one. I have taken old and new apart and there is no comparison. When I said the Reuleaux is better than the Triade I did not mean anything recent. I give the Triade that it looks very nice if the leather lasts which is doubtful. However as a $170 paperweight I figure it sucks. I am not trying to be a jerk and rub this in, I am just suggesting those that have not yet purchased one may want to think twice. I fixed mine but it is unusable because ripping battery wrappers shall simply suffice to again blow the fuse. Also as I mentioned it is not a real 510 even though it looks cool. Quite frankly I do not even know why I bothered replacing the fuse. MannyScoot, it is most likely your fuse as well. That is exactly how the board behaves when the fuse blows. I am sincerely sorry to everyone that had one of these reach an untimely demise. All show, No go. Of course there is no currently viable 3X 18650 DNA200 at the moment. At least that I know of. I would not buy a new Reuleaux either to add insult to injury. I hope you guys do not think I am being a troll. Obviously I am in the same boat. Mine acted up from the first minute and died Six days later but I did revive it. Even though it is still unusable as it stands.
SMH. The Reuleaux has been out for less than a 1 year. The DNA chip just a little longer than that. How have you been using it for 2 years?I did not even get that far with it. Problems from day One and on Sixth day blew. Nice job on the RX200! I took my Reuleaux DNA200 and electroplated it with chrome and then .5 mil Platinum. Now it is like a custom mod. Just like yours. The original DNA did not need any circuitry upgrading. It was built very well. Had a different 510 than the new ones too. I have been using it about Two years and have changed the batteries hundreds of times. On the original they gently, easily pop right in and out. Do not even need to use the ripcord. The new one is still great if you upgrade it. You should have got a better 510 if you wanted. I changed my magnets to Neodymium. the door is on solid now. it pulls the door from 6 inches away. those are the strongest little magnets.
These people just don't know it yet about their Triade but I bet they change their tune soon. I took it apart and it is pure crap. Everything I got from Lost Vape died in days. They are the bottom of the barrel. Wisemec is still good for a nice $30 mod. I probably would not buy the current DNA.
Man, you paid $6 more than me for the Triade. we got ripped. I bet your place will not take it back either? It will be interesting how their CS is. Let us know please. Half these China outfits just say user error to get out of it. The funny thing is I bought it solely for how it looks. Not for long I guess if the electronics do not crap out first. I have no idea how you get batteries in it without tearing them. The buttons in my battery sled do not even move! I am sure that is just bad QC.
I haven't used it (1) month..... It blew up on day 29.... You probably mean the other bad luck man........SMH. The mod has been out for less than a 1 year. The DNA chip just a little longer than that. How have you been using it for 2 years?
If you don't like your Triade why don't you just sell it instead of running around like a troll ripping it? I mean if you have juice running down your mod, then a mod with leather isn't for you. I try to keep the juice in my tanks, not running down the side of my mods. We get you don't like it (your like a broken record in more than 1 thread), not everyone likes every mod. Most people just move on instead of waging a personal vendetta against a mod.
Still haven't told us how you've been using your reuleaux for 2 years when it's only been out for one ?? You must be a beta tester for wismec... lmaoSame here. Looks great. I am just pissed okay. $170 down the toilet in 6 days. I do have a vendetta against it. Perhaps rightfully so. At least for me. if yours is real good then great.
I didn't want to be the one to say it but, yeah a single mod used almost 24/7 to go through nearly 40ml a day it probably not going to last the test of time. Should get more than 29 days out of it, but the point still stands.The way manny vapes, he's gonna need more mods...
VAPE ON
I didn't want to be the one to say it but, yeah a single mod used almost 24/7 to go through nearly 40ml a day it probably not going to last the test of time. Should get more than 29 days out of it, but the point still stands.
LOL..... I sit in the bathroom sometimes and Vape 10ml in 10 minutes chain Vaping just to kill the odor in there.......
Sent from my 710C using Tapatalk
It's good.... If you want to keep it for a long time...... Just just it very little or as least as possible..... And she will love you long time......Damn scary, my triade is still fine luckily and hope it won't die anytime soon .
Getting two custom dna 200 boxes now tho just so i can have some peace of mind if something goes wrong the fact i leave near the maker will be easy enough to fix. Only issue is it's going to be lipos, but welp worth it for not having to play the rma game specially since the store i bought my triade from can't even ship to my country atm, so if it breaks it will be fun.
I contacted the seller Vape Bay Incorporated and they are sending me a prepaid envelope to return the Triade for service or replacement...... So at least I accomplished something on day #1 of death......That sux bro.
Sent from my SAMSUNG-SM-N915A using Tapatalk
Glad to hear that bro.I contacted the seller Vape Bay Incorporated and they are sending me a prepaid envelope to return the Triade for service or replacement...... So at least I accomplished something on day #1 of death......
Sent from my 710C using Tapatalk
I was told to ship it to the Triade repair center in Ohio, I pay shipping myself and I should have it back in 4 to 6 weeks.....I did not even get that far with it. Problems from day One and on Sixth day blew. Nice job on the RX200! I took my Reuleaux DNA200 and electroplated it with chrome and then .5 mil Platinum. Now it is like a custom mod. Just like yours. The original DNA did not need any circuitry upgrading. It was built very well. Had a different 510 than the new ones too. I have been using it about Two years and have changed the batteries hundreds of times. On the original they gently, easily pop right in and out. Do not even need to use the ripcord. The new one is still great if you upgrade it. You should have got a better 510 if you wanted. I changed my magnets to Neodymium. the door is on solid now. it pulls the door from 6 inches away. those are the strongest little magnets.
These people just don't know it yet about their Triade but I bet they change their tune soon. I took it apart and it is pure crap. Everything I got from Lost Vape died in days. They are the bottom of the barrel. Wisemec is still good for a nice $30 mod. I probably would not buy the current DNA.
Man, you paid $6 more than me for the Triade. we got ripped. I bet your place will not take it back either? It will be interesting how their CS is. Let us know please. Half these China outfits just say user error to get out of it. The funny thing is I bought it solely for how it looks. Not for long I guess if the electronics do not crap out first. I have no idea how you get batteries in it without tearing them. The buttons in my battery sled do not even move! I am sure that is just bad QC.
Sucks you had to pay shipping and 4 to 6 weeks is a long time but at least your getting it repaired or replaced. Glad to hear it worked out.I was told to ship it to the Triade repair center in Ohio, I pay shipping myself and I should have it back in 4 to 6 weeks.....
Sent from my 710C using Tapatalk
Tuesday, unless you bribed the mail courier....LABOR DAY, Manny...........But my RX200 will be here on Monday.....
Sent from my 710C using Tapatalk
Fuck.... And it arrived in Orlando yesterday.... I was wondering why the tracking said unexpected delivery date Tuesday..... Fuck.... And i'm off Sunday and Monday......Tuesday, unless you bribed the mail courier....LABOR DAY, Manny...........
Can't *like* that.....but time flies when having fun.....pretend you're having fun...... ....Fuck.... And it arrived in Orlando yesterday.... I was wondering why the tracking said unexpected delivery date Tuesday..... Fuck.... And i'm off Sunday and Monday......
Sent from my 710C using Tapatalk
Sometimes you have to make your own mod...... My RX200.... Dearly loved, the 510 was weak and the cables thin and the paint was almost all gone. So now a Varitube V2 and new rewired with 14g and 16g...... She doesn't get hot anymore at above 85 watts.....To be frank I was so mad because I really liked this mod. However, while ripping battery wrappers. In fact as I mentioned that caused the fuse to blow. Wihich I also mentioned I replaced and it is working again. It continued to rip battery wrappers. So to me at least I found this to be unacceptable if not downright dangerous. Even though the fuse should just blow as it did. I did not wish to be replacing a fuse every time I used it either. Now, many find the Reuleaux mods to be just as tight. I on the other hand own several of which the battery sleds actually allow batteries to fall out without the cover in place. I have a RX3200 with a dead board(not the fuse). I do not care to send it to Evolv for a $30 mod. So I proceeded to engage in a project which was not too difficult for me at least. I fitted the Triade with a Reuleaux(White) batery sled. Now, it is a fine mod. I like it because the 510 is in the center even though it is no better than that of the Wisemec's. I like the shape. I like the feel in my hand with the leather. So for myself at least I have now made this usable. Rest assured, now I will use it plenty. So this problem is fixed and I am in a better mood. Of course their battery sled is unacceptable IMO. You should not have to modify it to be functional. Whatever though, I am much more pleased now. Notwithstanding the battery sled rendering this mod useless I find it to be very nice. It is not better than a Reuleaux DNA200(original, not the current crop which are also problematic). However It does look nicer and fils better in my hand. It is now at least equal to the Reuleaux DNA200 of yore. Probably better than a new offering from Wisemec. The point is this should not have to be undertaken to allow it's functionality and some cannot do so anyways.. Nonetheless I am now pleased with it and will give it more time than my many other mods including the Reuleaux DNA200. In a nutshell: Problem solved. Of course this should not be required of it but I am okay with it and just happy to have it in a functional state. So that's that, It is good and I am currently using it as I type this. However Lost Vape really needs to address this issue IMO. Many cannot or will not do this modification to it. Including having to possibly purchase a donor Reuleaux. Which would make the mod simply too expensive in that case IMO. I just happened to happen to have the parts,skills and time. This worked out good and I am now pleased. YMMV of course should you decide to partake in this modification of the device. Certainly voiding your warranty. I am all set now though.
I do apologize that I was a jerk about it.
Manny , when you get your upgraded rx post up some pics. I have been debating swapping the 510 on my rx 200s I love the mod but the 510 is shit ....and speaking of 510's I have to replace the one on my 521 tab also , got a dead short on it ...FML. But I am very curious as to how yours turns outSometimes you have to make your own mod...... My RX200.... Dearly loved, the 510 was weak and the cables thin and the paint was almost all gone. So now a Varitube V2 and new rewired with 14g and 16g...... She doesn't get hot anymore at above 85 watts.....
Now I sent her away for a custom paint job..... Sometimes you have to make something that you like, and at the end you have a 1 out of 1 mod...... Made the way you like it.....
I do like my Triade.... But I'm keeping it for home use..... When she gets a new board....
Sent from my 710C using Tapatalk
Yeah the 510 Varitube V2 is an internal adjusting 510..... So the internals fit the old RX200 pin left is VT right VT2..... Looks the same but it accepts longer pins......Manny , when you get your upgraded rx post up some pics. I have been debating swapping the 510 on my rx 200s I love the mod but the 510 is shit ....and speaking of 510's I have to replace the one on my 521 tab also , got a dead short on it ...FML. But I am very curious as to how yours turns out
Sent from my SAMSUNG-SM-G870A using Tapatalk
I took the opportunity to update my old RX200, I knew I would have to wait...... So I fixed my old beat up RX......They told you that? Darn, bad luck. I just blew the fuse which luckily I can replace. Actually you can bypass the fuse but that is a very dumb idea. Safety first or 6 feet under.
I thought of something and it is solely my opinion. No need to argue. Feel free to comment though. First of the new Reuleaux they have cut quality IMO. It is evident to me. The very original one with no CE or Recycle symbol I will compare here. Either way they are both high end Chinese production offerings. That being said..... I feel the Triade is akin to a Lexus. Looks great, Great cosmetic fit and finish but performance is not there. Hence the ones that die in less than Three weeks The Reuleaux on the other hand is akin to a BMW. Not built so great or particularly good looking but it performs if you take care of it. Even though I repaired my Triade including removing the rings(bad idea for most people) I am using the Reuleaux. I just like it better and that is personal opinion. However, 18650 is where it is at. Lipo has a real duty cycle of about 250. The way I vape then I have to go looking for a battery. May also have to damage some mods to get to it. Plus about twice the watt hours of anything easily obtainable. So that's that. Just my opinion of course. I think the Triade is very nice other than the very tight battery sled. Other than that a board can die in any mod. Just bad luck.