She will fire .08 on any of the TEMP modes 316L, Titanium, ni, and sometimes lower but not for long. The cables are so thin that she will get hot as hell and even die.... Safer to keep her at .10 or above.... Or rewire her with 14 gauge and she won't get hot at all .......
Indeed...the OP is trying to vape a fucking pipe bomb....!!
It will get hot as hell, from the mod passing it through the body and 510, from the internal cables and from the batteries....... It is a small bomb waiting to go..... .06 is low ....
WAY to LOW...!!!
Has your mod made it home yet, after the overhaul?
I think it looked like 18 gauge it was thin...... With 14 gauge you touch the fire button and it fires immediately..... No lagWhat size wire is inside the RX... from the manufacturer.....18-20 ga?
It's garbage wire, this we know.....
You should start a thread so folks can get their RX mods upgraded so they are much safer....!
I had mine for almost a year, and learned a lot... From not using the silicone case, take for example what we are talking about in relation to heat and put the RX200 in a silicone case.. She will be hotter than a $20.00 whore......
I found that out too....been using your advice when vaping the Modfather Inc on RX's.....
Hey..... Mine comes today...... I'm sitting by my mailbox. ......I found that out too....been using your advice when vaping the Modfather Inc on RX's.....
I've bought four of them, some seem to get hotter than others, piss-poor QC, but it should be expected for a $38.00 200W mod.
Great...can't wait to see it, and have you post how much better the mod is after upgrading the guts so it's safer.....!
Once you take her apart to change the color screen, you start seeing that she is not hard to work on..... Anybody can do it. .... There are so many YouTube videos......
Stainless steel works well.
Build parallel coils..... 6 or 7 wrap kanthal 26 gauge on a 3.00mn bit .... (2) coils should ohm out at .50
I love SS316L..... Someone got me to try 430
Yep, will work just fine...low-low ohms does not mean flavor and cloud......
People need to realize juice is very important in cloud production..... Using a gnc Palm oil naturally sweet and flavors that are VG or oil based, and using minimal PG...... Will give you massive clouds 85vg/15pg..... And when the VG is good quality it's real sweet, so you don't need sweetner......Yep, will work just fine...low-low ohms does not mean flavor and cloud......
Use gloves or touch the cotton as least as possible...... Oils from tools, old ejuice, and other stuff will get in the cotton and change the taste.......
Thankyou for this
So dont fluff the cotton then?
Once you put the cotton in the coil, cut it and then fluff the ends..... That way the absorb quick ....
On TC I have seen it go .07 .08..... Not on kanthal
he's using Ti wire. the RX200 won't control kenthal at all. Only works in wattage mode for that. Specs say .1 for wattage mode and .05 for TC mode
yup. I wouldn't personally do that. Maybe maybe only with the G2 would I do that
Stepping up I see..... I just slammed (2) 4 core SS316L wrapped on a 4mm bit, and 7 wraps...... Ha ha you can put a pencil through that bitch.Thanks for the help guys. Ive gone back to kanthal. Had a look at the steam engine site but dont know which coil option to choose. Just about to build 4 2pc twisted coils from 26g kanthal with 3mm diameter at about 8 wraps.
Lets see how she goes.....just have to wait an see for the ohms
Jon, try rayon.....it's tasteless, and lasts 5-times longer than cotton, wicks like a sob....!
That should last u about a week......Rayon rocks..... I just orders some 25 feet......
Sent from my 710C using Tapatalk
Rayon can last sometimes (2) weeks..... It's amazing how it barely burns ? What's in there ?That should last u about a week......
Nothing in there, just manufactured cotton.....cellucotton
That's what I like about it...even after a week of heavy vaping. Pulling the wick out it's still white where it was in the coil.
I was thinking, maybe going 2 pieces twisted together with 30g wire wrapping the twist, spaced on an angle. Evil looking coil id be thinking. That setup looks shit hot manny!!
Yes...will work just fine.
