http://www.vaporshark.com/hedron/?mc_cid=a883f32f72&mc_eid=f584a7fe69Has anyone seen this? Thoughts?
Become a Patron!
The Vapor Shark Herdon
- Thread starter skt239
- Start date
http://www.vaporshark.com/hedron/?mc_cid=a883f32f72&mc_eid=f584a7fe69Has anyone seen this? Thoughts?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I saw that and the new switchbox! They have a switch box with the dna75 for 104 and one with a wismex board for 64 that just came out.
I think its really cool. Especially if they keep the same service level they have with the DNA products. Its only about 20-30 bucks more than the realoux, its the same board(which is good), and uses the same fore button as all vaporshark mods(love the button).
I'm going to call down there tomorrow and see what else the Rx line has going on and may order a switch box, I have two triades so the hedron is something I really don't need, but another small light mod would be good.
I think its really cool. Especially if they keep the same service level they have with the DNA products. Its only about 20-30 bucks more than the realoux, its the same board(which is good), and uses the same fore button as all vaporshark mods(love the button).
I'm going to call down there tomorrow and see what else the Rx line has going on and may order a switch box, I have two triades so the hedron is something I really don't need, but another small light mod would be good.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Yeah, I haven't used that board in particular. But, I have used my girls evic mini, and I like the way the board performs. I'm more concerned on which 510 they are using for these.
I would consider it if the price was reasonable but it doesn't look like it could handle a 30mm atty w/o overhang. That's my new requirement lol
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Lmao!!! I'm trying to stick with 22s since I have so many tube mechmods. I have a couple of 24s but I'm not a fan of all that girth.
Every RDA I own except one is 22mm and most of my mods will only accommodate that size without overhang. I did recently get a 24mm and I really like. All the extra build space and juice capacity is nice to have.
Girth is where it's at, brah.
I always liked the Wismec board. I think it does a great job. My problem with Wismec is the shitty 510's they use. The board itself is fine it's just never been paired with a solid 510.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
The buttons light up man
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I picked up a pair of.triade 250s and then had to get a few new rdas at 24mm to make it loom good. They are welcomed additions, but only get home use. They are just too big to be worth carrying out and about. I prefer the smaller pocket friendly Mods for adv's
Agreed, but if vaporshark used different 510s and offer the same aftermarket service as they do on their other products, then it would be worth the extra money imho.
Last edited:
Absolutely, if it's got a killer 510 and better wiring with VS customer service it's worth the price of admission.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
I think I'll jump on this one I beat my rx200s and still working beside the paint everything else is g to g
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I bought one last night. Should be here in 3 days! Can't wait!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I'm sure it does if they're using the RX board.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I was thinking that too, but the description doesn't say; which, makes me wonder if they removed the capability for vs.
I'm also curious to see if that third party upgrade will work on it.
https://github.com/ClockSelect/myevic
http://vapingunderground.com/threads/new-custom-firmware-for-the-rx200s-and-rx2-3-now.283824/
I do wish they would move the 510 like the Triad is. Like you said hell it would fit just about anything you throw at it. We will see!! I will give y'all the whole nine yards when I get it!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Tbh, the way the board is now I wouldn't give a shit if it had updates or TCR. I just want a good 510.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
If it is vapor shark's 510, than it will be good. Everything I've used on mine has fit flush
I've said it before, that Wismec board is pretty bullet proof. You never hear people complaining about their board blowing up. It's always that good for nothing 510. It's a shame too, because I would own a ton more of those mods with that board if they would just use a decent 510. I don't even need a high quality one. Just a decent one.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
Ok so I just got off the phone with Vapor Shark. The customer representative confirmed that my order was shipped out today so should have it by Friday. He said I was the first one to buy the mod when it launched Sunday. So that was pretty cool news. He said I would be the first to vape on it. So then he asked me did I have any questions about the Mod. I said well now that you mention it I do. I asked him was it VS 510 on the mod or Wismec? He said it was Wismec. He said they knew about the 510 problem that Wismec had taken care of it. He said the mod is under Vapor Sharks warranty so if the 510 or anything else goes wrong with the mod then they would fix it up to a year free of charge and then after a year if anything happens it would be a small service charge to repair whatever is wrong. The coating on it is not like the rubber coating on the DNA 200 or 250. He said this was a more durable coating. Not really sure what that meant but my Doberman was fixing to eat the mailman so I had to kind of cut it short. I will take a bunch of pictures and maybe a video to let you all see for yourselves. He said it was about as heavy as the Triade DNA 250. He said it feels really good in the hand and is built like a tank. So we shall see. But I know they have a excellent service department. Last week I sent my DNA 200 in to get the battery replaced. They service tech called me and told me if I wanted to swap my old 200 out to the 250 DNA they would only charge me 50.00. Didn't think that was a bad deal so I went ahead and had that done along with the new battery. Granted I live in South Alabama so it didn't have to go very far but from the time it left my house till the day it returned was 5 days. I thought that was really impressive. They were really nice over the phone and helpful. So just from my experience I think their Customer Service is awesome. I have no complaints with them to date. Just my 2 cents though. Hope everyone had a great day! Cheers it's beer 30 for me!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Awesome bro!!!Im stalking the mailman!! Lol Pictures are coming soon!!
Sent from my iPhone using Tapatalk
And just FYI- their customer service rocks! Best ive seen in the industry
- and sorry to see you're a bama fan. Lmao
- from LSU
Yeah I've got 2 VaporSharks and agree they have very good customer service. Just had a DNA 200 upgraded to a 250 and they did an awesome job. I'm not a Alabama fan either! I am a Auburn fan. Lol. LSWho?? Lol just kidding bud. Now for the fun stuff!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
You can use 25 mm with no over hang ?
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Ok so first impressions. The mod has a solid feel to it. With batteries in it, it feels like the RX200s. It has a different feel to it when holding it than the RX200s. It's had to explain but it does feel really good in the hand. Nice clicky buttons. The battery door is solid and does not have a rattle or any movement what so ever. It has a nice retention when pulling the battery cable off. Now as far as tanks go. The picture that I took was for a 30mm MF tank. I personally don't like the looks of it at all. The top of the tank is very odd shaped. So it's only gonna fit 22mm and 24mm with no over hang. Any way this box is not gonna be for me. I use 28,30,and 40mm tanks. This just isn't gonna work for me. I am gonna sent it back to VaporShark for a refund or if someone is interested in owning it you can PM me. Got any questions feel free.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
The finish is a smooth paint finish. Not like the rubber coating on the DNA 200. It's a nice paint finish. And that is a 30mm Modfather tank.
Sent from my iPhone using Tapatalk
That's with the Smok Beast Cloud. No overhand and sits flush.
Sent from my iPhone using Tapatalk
That's with the Smok Beast Cloud. No overhand and sits flush.
Sent from my iPhone using Tapatalk
That looks odd as hell man. Cool looking device otherwise
I can't for the life of me understand why mod makers do that. Any mod with 3 batteries or more should automatically be able to handle a 30mm tank. Period, end of story. Why they insist on making these fucking huge mods that can barely handle a 25mm tank actually astounds me.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
Putting the 510 in the center would be the best option
I hear ya, I don't even own a 30mm tank but it just makes sense with all the Big Boy tanks coming out. I'd rather have the space and not use it then not have the option at all. In fact the main reason I don't own a 30mm tank is because I don't have a mod that a tank that size would look good on, yet. Lol.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Like the Triade?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I'm just weird.
I tend to prefer the smaller and lighter overall.
I have a pair of triades and some dual battery boxes but those rarely leave the house. I usually grab the radius60 or vaporshark when I'm out and about.
Yeah it's just stupid not to design one to at least fit a 30mm atty. especially theses days! I don't know that's just me though. Well if anyone is interested in it send me a PM. If not Monday it's going back to VS.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Wanna sell a triade?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Honestly, not really.
im loving then for at home.
The reason some companys dont center the 510 is because of room. Its hard to put the 510 above the batterys without making the mod taller. Lost Vape solved this with the triade by raising the 510 and making a platform. It still doesnt fit a 30 on the platform but atleast the tank doesnt hang off the side of the mod. But it usually is pushed forward due to the batterys being in the back.
Yep just got off the phone with them. They said send it back and they will be happy to refund my money no problem.
Sent from my iPhone using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
They have done that in the past, the customer service there is the reason I'm so loyal