Become a Patron!

I have a kangertech juppi and I want to add another tank

i have he kangertech juppi and since I absolutely hate the tank I want to buy an RDA style. It said on the rda page that it should not be connected on any hybrid and I don’t know if my mod is a hybrid or not.
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Welcome to VU. You should be able to use an RDA on that, need to make sure its tall enough to stick up past the mod and the design of it is going to limit your options slightly but it is doable.

From some random website selling this.
Please note, due to the design of the device, the Juppi TC Box Mod is only compatible with 22mm tanks or smaller. 23mm and larger tanks are NOT compatible and will not fit the Juppi TC Box Mod. Certain 22mm tanks may not fit if a part of the tank juts out such as the airflow valve or top cap. If you are unsure if your tank fits, feel free to contact us and we will confirm if your tank is compatible or not.
 
I
Welcome to VU. You should be able to use an RDA on that, need to make sure its tall enough to stick up past the mod and the design of it is going to limit your options slightly but it is doable.

From some random website selling this.
Please note, due to the design of the device, the Juppi TC Box Mod is only compatible with 22mm tanks or smaller. 23mm and larger tanks are NOT compatible and will not fit the Juppi TC Box Mod. Certain 22mm tanks may not fit if a part of the tank juts out such as the airflow valve or top cap. If you are unsure if your tank fits, feel free to contact us and we will confirm if your tank is compatible or not.
I bought the dead rabbit hethen 22mm. I did the measurements and it is a bit smaller than the 24mm in height which means that it will fit.
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
I

I bought the dead rabbit hethen 22mm. I did the measurements and it is a bit smaller than the 24mm in height which means that it will fit.

Are you sure that will be tall enough for the drip tip to clear the mod?
 
Are you sure that will be tall enough for the drip tip to clear the mod?
I got the measurements for the Juppi tank and then compared it with the 24mm version. Saw a side bye side comparison of the 24 and 22 and saw that the 22 was maybe 3 to 4 MM different so I just put the measurements into an inch translator and saw that he hethen would either be just right or a mm or two small.
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
If its too short you can try to find an extra tall drip tip to get some clearance.

Check these out and see if they are tall enough. Links are random places based on search. Not an endorsement of that site but gives you an idea of what will clear.

https://hazetownvapes.com/products/geek-vape-tsunami-22mm-rda?variant=16745848837

https://www.gearbest.com/vapor-styles/pp_581317.html

https://elementvapesregina.com/product/rebuildables-double-vision-22mm-rda/
Ok perfect I’ll look at these if it is. Thank you!
 

VU Sponsors

Top