Cloud Chasing w/Sigelei 150w

[CoilBuldin'CloudChaser]

So I'm building on my Sigelei 150w box and have been using a copper Doge clone. I usually run my box at 75w and I am using 22g ribbon wire by cloud chasers at 6 wraps a piece for my coils. My ohm resistance is .1 but I was told I cannot go below that .1 build. Can someone explain why I cannot? Because less resistance means more heat which means more clouds correct? Please help me get comp ready.

 

[VaporIQ]

You can't on that mod unless you like seeing expensive things you buy catch on fire.

You need a mechanical mod and a high drain battery. Before you go lower PLEASE make sure you know ohm law and battery safety! I'm sure you like your face like it is and not melted.

If you need help with this let me know.

 

[Neunerball]

http://vapingunderground.com/threads/cloud-chasing-w-sigelei-150w.89082/

 

[CoilBuldin'CloudChaser]

You can't on that mod unless you like seeing expensive things you buy catch on fire.

You need a mechanical mod and a high drain battery. Before you go lower PLEASE make sure you know ohm law and battery safety! I'm sure you like your face like it is and not melted.

If you need help with this let me know.

Ahh I was just wondering why I couldn't, I knew it was battery related. I'm fairly new to vaping but I'm tryna build up to competition quick. There's one on the 20th and I need coil ideas to win. I got the Sigelei 150w of course but I just got the dark horse, I have 26 gauge kanthal and some 22 gauge cloud chasers ribbon wire. Any ideas bro?

 

[VaporIQ]

I would use the 22g for sure. Shoot for a 0.12-0.15 ohm dual coil set up. I wouldn't get to close to 0.1 on that mod just in case. Also make sure you bring fresh batteries as back up. I learned that lesson the hard way at a comp in Dallas. My batteries just crapped out.

Maybe others will post some ideas for you as well. There are so many ways to make coils for clouds but I believe keeping it simple works best. Also most of cloud chasing is technique when you inhale and exhale. You can have a sick build but if you don't perfect the above it will be a long day at the event.

 

[VaporIQ]

Ahh I was just wondering why I couldn't, I knew it was battery related. I'm fairly new to vaping but I'm tryna build up to competition quick. There's one on the 20th and I need coil ideas to win. I got the Sigelei 150w of course but I just got the dark horse, I have 26 gauge kanthal and some 22 gauge cloud chasers ribbon wire. Any ideas bro?

I'm not sure of the resistance of the cloud chasing wire so I can't tell you how many wraps for the 22g but you can start with 5-6 wraps of 2.5mm or 3mm and see what you get on the ohm meter.

Maybe try parallel if the ohms aren't low enough with a regular wrap. Post the pictures here after. I'd like to see the results.

 

[CoilBuldin'CloudChaser]

I'm not sure of the resistance of the cloud chasing wire so I can't tell you how many wraps for the 22g but you can start with 5-6 wraps of 2.5mm or 3mm and see what you get on the ohm meter.

Maybe try parallel if the ohms aren't low enough with a regular wrap. Post the pictures here after. I'd like to see the results.

How would I even build parallel with ribbon wire? Lol I've done it with regular kanthal. Not ribbon.

 

[VaporIQ]

That's the fun part haha. Experiment or use the force. Make clouds you will.

 

[gudus1183]

I have a istick20 by eleaf with a spartan mini btc tank on it can anyone give me advice on if thats a good combo?

Sent from my ME172V using Tapatalk

 

[gudus1183]

I have a istick20 by eleaf with a spartan mini btc tank on it can anyone give me advice on if thats a good combo?

Sent from my ME172V using Tapatalk

In addition to previous post i am new to vaping and the guy at vape shop said it was a good combo

Sent from my ME172V using Tapatalk

 

[VaporIQ]

I have a istick20 by eleaf with a spartan mini btc tank on it can anyone give me advice on if thats a good combo?

Sent from my ME172V using Tapatalk

IMO its a good combo. I personally would have went with the istick 30w for a little more room if you want to upgrade to sub ohming later but nothing wrong with that.

 

[gudus1183]

IMO?

Sent from my ME172V using Tapatalk

 

[gudus1183]

Nevermind got it thanks

Sent from my ME172V using Tapatalk

 

[gudus1183]

Can i go with a different tank to get more vapor?

Sent from my ME172V using Tapatalk

 

[VaporIQ]

Its possible but you are very limited on what you can get because the 20w can only handle I believe 1ohm vs an istick 30 can go down to 0.4 ohm. To get more vapor you need a sub ohm tank and max VG juice.

This is my go to set up. Kanger sub mini and istick 30.

 

[gudus1183]

Awesome so the lower the ohms and stronger battery is what i should try?

Sent from my ME172V using Tapatalk

 

[gudus1183]

I got this because i was worried about it being too top heavy so i went with the mini spartan btc

Sent from my ME172V using Tapatalk

 

[VaporIQ]

I got this because i was worried about it being too top heavy so i went with the mini spartan btc

Sent from my ME172V using Tapatalk

Is that a sub tank?

 

[gudus1183]

Its a Spartan mini btc by horizon tech

Sent from my LGL34C using Tapatalk

 

[VaporIQ]

I'll google it lol

 

[VaporIQ]

OK I googled it and looks like your shop did a good job of paring you with a sub tank that will fire on your istick. Now how do you like it is the question?

 

[gudus1183]

I like it i was just curious if a different tank would produce more vapor without buying a new battery since its only a week old mabye a lower ohm tank but i cant seem to find how low of ohms i can go on my istick

Sent from my LGL34C using Tapatalk

 

[gudus1183]

And also tanks i apprecciate you taking the time to help if you were near new bern nc area i would offer help with your roof if needed since thats what i do for a living

Sent from my LGL34C using Tapatalk

 

[VaporIQ]

And also tanks i apprecciate you taking the time to help if you were near new bern nc area i would offer help with your roof if needed since thats what i do for a living

Sent from my LGL34C using Tapatalk

Thanks for the offer but I don't need anything for helping. I enjoy good convo.

 

[Joey330]

WOW, just went to walmart and picked up some vg....
juice makes a huge difference! my clouds were big, now they are massive.

no clue how to mix so i just dumped a crap load of vg into my 18mg vanilla custard and still has taste and blows clouds crazy!

 

[Joey330]

New cloud

 

[VaporIQ]

Look at the rain and lightning underneath it

 

[Joey330]

Look at the rain and lightning underneath it

i keep wanting to go bigger and bigger!

i dont think i will get much bigger, just better length. The density is there for sure! lol
being behind the cloud you dont get to see the true measure of it! pictures always make you feel better
"Maybe thats why they call it chasing? :O?

 

[VaporIQ]

Haha maybe but yes I'm always wanting more cloud!

 

[VaporIQ]

i keep wanting to go bigger and bigger!

i dont think i will get much bigger, just better length. The density is there for sure! lol
being behind the cloud you dont get to see the true measure of it! pictures always make you feel better
"Maybe thats why they call it chasing? :O?

Sometimes when I drive I forget to blow my cloud to the side and I can't see for a few secs haha!

 

[Joey330]

Sometimes when I drive I forget to blow my cloud to the side and I can't see for a few secs haha!

ive done that one to many times! AH!

 

[Stepinrazor]

Yep, crack the window open a little and the clouds will chug nicely behind you in your wake.

Steamboat Willie Style

 

[VaporIQ]

Yep, crack the window open a little and the clouds will chug nicely behind you in your wake.

Steamboat Willie Style

Haha

 

[CoilBuldin'CloudChaser]

So what's everyone running for clouds? Mods, RDA, coils, coil build, juice, juice specifics. At the moment I'm running the Sigelei 150w at 65w, 4.8v, .3 ohms, dark horse rda, single tiger coil, 6 wraps on a 2.0mm bit, I made the coil twisting 22g ribbon and 28g kanthal. As far as juice I get most of mine from the local vape shop, great times vapes, Tigers Blood, 100% VG. I did get a 120 ml bottle from violet vapors of caramel candy perfection. 100% VG also.

 

[VaporIQ]

So what's everyone running for clouds? Mods, RDA, coils, coil build, juice, juice specifics. At the moment I'm running the Sigelei 150w at 65w, 4.8v, .3 ohms, dark horse rda, single tiger coil, 6 wraps on a 2.0mm bit, I made the coil twisting 22g ribbon and 28g kanthal. As far as juice I get most of mine from the local vape shop, great times vapes, Tigers Blood, 100% VG. I did get a 120 ml bottle from violet vapors of caramel candy perfection. 100% VG also.

For clouds I keep it simple using dual 3mm 24g 7 wrap parallel. It's around 0.2 ohms and gives me great dense vape but you lose some flavor.

But... I'm cloud chasing with this build and I use VG max juice called Vampires Blood.

 

[gudus1183]

Thanks for the offer but I don't need anything for helping. I enjoy good convo.

Thanks for all the advice. Today i went to my local vape shop and got an Innoki Itaste mvp 3.0 pro and love it!!!!! I'm thinking about starting to make my own liquid to get bigger clouds. Thanks again you and everyone else were a big help

gudus1183

 

[gudus1183]

Thanks for all the advice. Today i went to my local vape shop and got an Innoki Itaste mvp 3.0 pro and love it!!!!! I'm thinking about starting to make my own liquid to get bigger clouds. Thanks again you and everyone else were a big help

gudus1183

Sorry but i meant to write Innokin mvp 3.0 pro starter kitwith Innokins isub .5 ohm tank

gudus1183

 

[vapeboss43]

I have the sigeli 150 also with the cloud chaser archon on it 20g 6 wrap dual coil it's a .1 ohm build and it has been doing wonders for me

Sent from my SM-N910P using Tapatalk