coil building

Hey VU, So my hands finally got tired enough from hand wrapping single claptons and I want to invest in a workstation to build my own coils. The thing is, I don't know EXACTLY what I need. I know I'll need a drill and some fishing swivels, but that's about it. I've watched many videos online...

Goal to achieve: Clouds..... but still want flavor Backstory: So i started making fused clapton myself, while obtaining a subzero shorty tube mechmod. At first i making 2 core Nic80 26g wrap with Nic80 40g, had steam engine doing my calculation. with dual coil and 3mm with 3 wrap which got me...

so i just bought my first mech got it in today spent the last few weeks learning EVERYTHING or about almost everything... lol but i bought pre built and pre wrapped coils just to keep my shit simple for now. it gives the ohms on them but when i fired them up on my paranormal it gave 0.26 for a...

Functions: -Hook the cotton -Build the coils -Adjust the coils -Tighten the screws Package includes: 1x Vivismoke Magic Stick

I'm looking for a new or in used good condition with all pieces, AvidArtisan Daedalus Pro - Full Kit with drill. I have cash or stuff to trade.

1. 5Pcs/Bag Coil Father Toothpick Cotton $0.95 2. Coil Father Ceramic Tip Tweezer $1.65 3. Coil Father 25/30/35/40 Heating Wire Coil Jig $2.8 4. Coil Father Super Diagonal Plier $2.9 5. Coil Father New X6S Vape DIY Tool Kit $9.6

alright, this is a work in progress thread, which aims to act as a listing for all of the 'official' threads in the building section of the forum. the 'post your builds' thread is full of good info, but its getting huge, and lots of the info and questions have been asked/answered repeatedly...

So I'm new to building coils and this is my first time with an RTA. I'm using the Vaporesso Revenger kit with a Zeus RTA (single coil). So I went ahead and built a parallel coil (I was recommended to do so by the guy from the vape shop where I bought it) and wicked it up before testing for hot...

hey I’m Dylan I have a dual coil dead rabbit rda recently I built a pair of parallel coils with 22 gauge nichrome 80 wrapped around 2 size bit on my coil maker I hand wrapped them and got them fixed and ready to use but then are a .04 build I need help finding a mod and the right wattage to run...

Do you build your own atomizer coils? If you do, it’s likely that you go through a lot of cotton. There are plenty of reasons why cotton is the most popular wick material for coil building. Cotton is inexpensive. It’s a natural material, so many people feel comfortable with it. It doesn’t add...

Just want to pass on a few things that may help beginners in building and wicking. 1-Youtube is your best friend. Every atomizer is different, they have different personalities and each one needs to be built differently. Best starting point IMHO is youtube, look at the videos of those that...

Hi all, New to the forum and new to coil building. Have a squonk mod (Kangertech 160W) and was using the supplied atomiser with pre-built coils to good effect. Tried building my first coil for the steamcrave V-RDA atomiser and aimed for a 0.3Ohm dual coil (4mm internal diameter, 5 wraps per...

hi, I've been vaping for just two weeks now and I need help. Is it normal that my coils gunk within just after I finish one refill. I was using the kanger dripbox before and switched to a praxis banshee. Been using the same juice and tried new ones but it seems that the coils gunk too fast...

After a long time of development and testing, "VaporSuite" has finally been released!!! VaporSuite is the ultimate app for vaping enthusiasts. It has a full set tools for DIY juice-makers and coil-builders, keeps track of your daily vaping activities, and manages your consumables, vaping...

My go-to build is wrapping SS 316L, 24g, staggered fused claptons. Oh, such flavor. I always build dual coil builds, very low ohm (around 0.11). I get tremendous flavor this way, and they say SS is the most health-conscious wire. So, do you guys think it's more important to make the perfect...

Please vote or reply with additional commentary. Appreciation in advance. VU is my vaping Graceland. derp

Hey master builders, i'm here asking my first building questions i was wandering around when i saw "How to make macro coils tutorial" then i saw "Micro coils" and more! i already know what's clapton wire, i know what's twisted, double and more but i need a complete list of these with a...

DigiFlavor is releasing a new RDTA that looks like the Medusa except a much, much deeper juice well. It has 4 mil juice cap and takes 810/Goon style chuff caps or use the adapter for 510's. I like the concept of dumping juice down onto the coils and it fill a tank at the same time cause I...

Hello i built 2 macros coils useing Mad hatter 26g wire ,i set them up in my baal v4 rda and they glowed perfect but after inserting my cotton I noticed the leads on the coils had hot spots in them how do I fix this http://imgur.com/wHVbUGI <picture of my problem

When I enter a coil on steam engine, I always get an unreasonable amount of wraps to achieve the desired resistance. For example, I have SS430, 28ga, 3mm ID spaced wraps on a machine screw. I built this using 6/5 wraps. Each coil comes out at .74 which give me .37 when dual on both the 521 I...

I've been building my RDAs with SS304 for a while now and have had nothing but good results. The coils seem to last a week or two before get ginky. I recently purchased a Griffin RTA, put the same build on it and WOW, hard to believe that a tank could give such flavor. Around a tank later the...

I've yet to successfully build my own coil. Will do tomorrow. Q: Can I do dual coils on a single coil deck? Anyway, here's something that's crazy: Top 10 Coil Builds: Who's done which and why?